• Korean Journal of Materials Research
• /
• v.4 no.7
• /
• pp.808-816
• /
• 1994

The work present here shows the technique to produce p-Doped polypyrrole particles by semibatch dispersion polymerization using steric-stabilizer. Monomer-starved polymerization process was successful to increase the particle size up to 50 nm in case of polyvinylalcohol (PVA) stabilizer, and up to 95 nm in case of methylcellulose stabilizer. The particle size and the bulk conductivity changed with the feed rates of monomer, the concentrations of initiator (dopant) and the type, molecular weight, concentrations of steric-stabilizer.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.2
• /
• pp.129-134
• /
• 2003

A wide variety of unsaturated vinyl derivatives can be induced to undergo free-radical chain polymerization. The capability to carry out a thermodynamically feasible polymerization relies on its kinetic feasibility on whether the proceeds at a reasonable rate under a given set of reaction conditions. Initiator or promoter is often required to achieve the kinetic feasibility. Only a few unsaturated monomers including methyl methacrylate(MMA) are known to absorb light between 250 and 500 nm which is the most convenient wavelength range. Also, the polysilanes with unusual optical and electronic properties have been used as ceramic precursors, deep UV photoresists, photoconductors. The hydrosilation has been used to make many interesting types of silicon containing polymers such as copolymer, dendrimers. Bulk polymerization of monomers with different molar radio of hydrosilanes(9:1 through 1:9) were performed. A quartz test tube charged with monomer and hydrosilane was degassed and irradiated with 250 nm UV for 6 hours. The polymer was taken in toluene, precipitated in hexane, filtered off, and dried. It was found that the initiators appeared to competitively and concurrently function as both chain initiation and transfer agents in the polymerization of vinyl monomers.

• Macromolecular Research
• /
• v.17 no.1
• /
• pp.26-30
• /
• 2009

To modify and strengthen the properties of PHEMA hydrogel, composite hydrogels containing varying amounts of a Pluronic (PEO-PPO-PEO) component were synthesized by bulk polymerization of HEMA in the presence of Pluronic dimethacrylate under mild photo initiating conditions. The effects of the Pluronic component on gel properties were investigated by measuring the degree of swelling with its temperature responsive behavior, the mechanical properties, and the morphology of the composite hydrogels. With increased Pluronic content, the modified PHEMA hydrogels exhibited an increase in the degree of swelling, and the swelling showed an enhanced thermo-responsive behavior that was completely reversible. In addition, improved mechanical strength and the development of a microporous gel morphology were observed in hydrogels containing Pluronic.

• Journal of the Korean Chemical Society
• /
• v.22 no.4
• /
• pp.268-274
• /
• 1978

The kinetics of the bulk polymerization of propylene sulfide initiated by o-sulfobenzoic anhydride were investigated, which proceeded by a zwitterionic mechanism.The instantaneous concentrations of monomer and initiator were determined by means of ir-and nmr-spectroscopy. The rate constant of propagation was found to be about three order of magnitude higher than that of initiation and this should be caused by a zwitterion mechanism.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.433-438
• /
• 1997

(p-Methylbenzyl)-o-cyanopyridinium hexafluoroantimonate, a new catalyst, was synthesized by the reaction of o-cyanopyridine with α-bromo-p-xylene followed by exchange of counteranion with SbF6θ. We examined the effect of the catalyst on the bulk polymerization of tetrahydrofuran under various conditions. The catalytic activity was best in the presence of 1 : 1 of epichlorohydrin used as cocatalyst versus catalyst concentration. The resulting polymers had relatively low conversions in 1.0-40%. Their number average molecular weights were in the range of 800 to 5300. Propagation rate increased with increase in temperature according to an Arrhenius expression giving an activation energy of 62 KJ/mol. We also found catalyst proceeds via a cationic mechanism.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.12
• /
• pp.1337-1340
• /
• 2001

The bulk photopolymerization of methyl methacrylate (MMA) with para-substituted phenylsilanes such as F-C6H4SiH3 (1), H3C-C6H4SiH3 (2), and H3CO-C6H4SiH3 (3) was performed to produce poly(MMA)s containing the respective silyl moiety as an end group. For all the hydrosilanes, the polymerization yields and the polymer molecular weights decreased, whereas the TGA residue yields and the relative intensities of Si-H IR stretching bands increased as the relative silane concentration over MMA increased. The polymerization yields and polymer molecular weights of MMA with 1-3 increased in the order of 3 < 1 < 2. These hydrosilanes influence significantly upon the photopolymerization of MMA as both chain-initiation and chain-transfer agents.

• Macromolecular Research
• /
• v.11 no.2
• /
• pp.128-131
• /
• 2003

Triblock copolymers of poly(dimethylsiloxane) (PDMS) middle block and degradable polyester end blocks were synthesized by the ring open polymerization initialed by alcohol groups of PDMS. Surface composition of the triblock copolymers is measured by angle-dependent electron spectroscopy for chemical analysis. The PDMS blocks are segregated in the topmost surface region and constituted up to 90 mol% of the surface, even though the overall bulk PDMS concentrations of the block copolymers is 6% or less. This result suggests that the bulk property of degradable polyesters is essentially unchanged due to the high surface segregation of PDMS.

• Proceedings of the Korean Society of Rheology Conference
• /
• 2006.06a
• /
• pp.187-190
• /
• 2006

• Bulletin of the Korean Chemical Society
• /
• v.17 no.4
• /
• pp.376-379
• /
• 1996

The bulk photopolymerization of methacrylic acid (MA) with phenylsilane was performed to produce poly(MA)s containing phenylsilyl moiety presumably as an end group. It was found that while the polymerization yields and intrinsic viscosities decreased, the TGA residue yields and the relative intensities of SiH IR stretching bands increased with increasing molar ratio of phenylsilane over MA. The phenylsilane seemed to significantly influence on the photopolymerization as both chain initiation and chain transfer agents.

• Restorative Dentistry and Endodontics
• /
• v.47 no.4
• /
• pp.45.1-45.10
• /
• 2022

Objectives: This study evaluated the relationship between the battery charge level and irradiance of light-emitting diode (LED) light-curing units (LCUs) and how these variables influence the Vickers hardness number (VHN) of a bulk-fill resin. Materials and Methods: Four LCUs were evaluated: Radii Plus (SDI), Radii-cal (SDI), Elipar Deep Cure (Filtek Bulk Fill, 3M Oral Care), and Poly Wireless (Kavo Kerr). Irradiance was measured using a radiometer every ten 20-second activations until the battery was discharged. Disks (4 mm thick) of a bulk-fill resin (Filtek Bulk Fill, 3M Oral Care) were prepared, and the VHN was determined on the top and bottom surfaces when light-cured with the LCUs with battery levels at 100%, 50% and 10%. Data were analyzed by 2-way analysis of variance, the Tukey's test, and Pearson correlations (α = 5%). Results: Elipar Deep Cure and Poly Wireless showed significant differences between the irradiance when the battery was fully charged versus discharged (10% battery level). Significant differences in irradiance were detected among all LCUs, within each battery condition tested. Hardness ratios below 80% were obtained for Radii-cal (10% battery level) and for Poly Wireless (50% and 10% battery levels). The battery level showed moderate and strong, but non-significant, positive correlations with the VHN and irradiance. Conclusions: Although the irradiance was different among LCUs, it decreased in half of the devices along with a reduction in battery level. In addition, the composite resin effectiveness of curing, measured by the hardness ratio, was reduced when the LCUs' battery was discharged.