• 한국안광학회지
• /
• 제20권4호
• /
• pp.501-509
• /
• 2015

목적: 자동포롭터의 표기 도수와 구면굴절력 및 원주굴절력 실측값을 비교하여 굴절력의 신뢰도를 평가하였다. 방법: 자동포롭터의 마이너스 구면렌즈 및 원주렌즈의 굴절력을 수동렌즈미터로 측정하여 표기도수와의 정확도를 비교하였으며 두 렌즈가 중첩되었을 때의 합성굴절력과 등가구면굴절력을 시험렌즈와 비교 평가하였다. 결과: 포롭터에 내장되어 있는 구면렌즈의 구면굴절력은 70.6%가 표기도수와 0.125 D 이상의 오차가 발생하였으며, 굴절력이 높아질수록 오차값도 증가하였다. 원주렌즈의 단일 원주굴절력은 표기도수와 거의 일치하였다. 포롭터에서 구면렌즈와 원주렌즈가 중첩되었을 때의 합성 구면굴절력은 단일렌즈 구면굴절력과 동일하여 중첩에 의한 구면굴절력의 변화가 없음을 알 수 있었다. 그러나 구면렌즈와 원주렌즈가 중첩되었을 때의 원주굴절력은 표기도수와 큰 차이가 있어 중첩에 의해 영향을 받는다는 것을 알 수 있었다. 포롭터를 이용하여 실측된 등가구면굴절력은 표기도수 및 시험테를 이용한 등가구면굴절력에 비해 낮았으며 고도수일수록 더 낮았다. 결론: 고도의 근시안 또는 근시성 난시 안에서 자동포롭터를 사용하여 시력검사를 하는 경우 표기도수와 차이가 발생하며 과교정이 될 것으로 보여 이에대한 개선이 필요할 것으로 보인다.

• 한국정밀공학회지
• /
• 제33권1호
• /
• pp.23-29
• /
• 2016

In this paper, a real-time condition diagnosis system for the lens injection molding process is developed through the use of LabVIEW. The built-in-sensor (BIS) mold, which has pressure and temperature sensors in their cavities, is used to capture real-time signals. The measured pressure and temperature signals are processed to obtain features such as maximum cavity pressure, holding pressure and maximum temperature by the feature extraction algorithm. Using those features, an injection molding condition diagnosis model is established based on a response surface methodology (RSM). In the real-time system using LabVIEW, the front panels of the data loading and setting, feature extraction and condition diagnosis are realized. The developed system is applied in a real industrial site, and a series of injection molding experiments are conducted. Experimental results show that the average real-time condition diagnosis rate is 96%, and applicability and validity of the developed real-time system are verified.

• 전기학회논문지P
• /
• 제61권2호
• /
• pp.97-102
• /
• 2012

CPV system in the desert areas or areas near the equator, as is suitable for high-temperature region. As compared to silicon solar cells, CPV system have a high proportion of a BOS (balance of system). Solar cells because of its low proportion when designing a module technology is applied in a variety of ways. Applied to the CPV system is classified into two kinds of optical technology. One of those using fresnel lens uses refraction of light energy. The other is a mirror reflection of the structure using sprays. Both of these two ways to condense the sun to collect solar cell is a form of light. And goals by using a small solar cell materials is to produce more energy. In this paper, suitable for a domestic environment, with the aim CPV Manufacturing Technology, built on a variety of modular process technology to the development of a prototype performance analysis was carried out. In particular, silicone coated on the glass by the method of implementation of the Fresnel lens SOG(Silicon on glass) by applying the lens to absorb the solar spectrum was broad. In addition to, for the analyze to characteristics of the CPV module, developed CPV module performance and generating characteristics studied. These related technology through research and development of high-performance multi-junction solar cells, modules, development of concentrating solar power systems to facilitate the growth of the market is considered to be.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.93-98
• /
• 2011

The application of knowledge management concepts as a way to improve project success is an emerging topic for project management researches around the world. The Construction Extension to the PMBOK^® Guide Third Edition documents the knowledge and practices that are generally recognized as good practices for managing engineering and construction projects. However, it is not unusual to see that engineering and construction projects suffer from poor performance. Based on a critical literature review, a theoretical framework is developed for the application of knowledge management in engineering and construction projects. This framework is subsequently applied as a lens to examine the construction extension to the PMBOK^® Guide, aiming to identify the key characteristics of knowledge management in this standard. This research also aims to highlight those aspects of the construction extension to the PMBOK^® Guide that can be improved from the knowledge management perspective. Recommendations are made to improve this standard by means of applying knowledge management concept so that better project outcomes can be achieved.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.254-257
• /
• 2004

Both ground and space telescopes are being built larger and larger. Accordingly, the secondary mirrors become larger which are convex mostly on the surface form. Testing convex mirrors becomes more difficult and delicate than testing concave mirrors in optics, because additional optical components are needed to make the reflected rays converge. Hindle type tests are frequently used for measuring the surface deforms of convex mirrors, which employs a meniscus lens to reverse the diverted rays from the mirrors. In case of testing large convex mirrors by using Hindle type tests, attention would be needed as larger meniscus lens is required. A method of modified Hindle test has been studied and the characteristics are analyzed. In this paper, current method of testing convex mirrors is presented, and a new method is discussed.

• Current Optics and Photonics
• /
• 제5권4호
• /
• pp.391-401
• /
• 2021

In the present study, a hyperelastic constitutive model is built by complying with a simplified hyperelastic strain energy function, which yields the numerical solution for a deformed polydimethylsiloxane (PDMS) membrane in the case of axisymmetric hydraulic pressure. Moreover, a nonlinear equilibrium model is deduced to accurately express the deformation of the membrane, laying a basis for precise analysis of the optical transfer function. Comparison to experimental and simulated data suggests that the model is capable of accurately characterizing the deformation behavior of the membrane. Furthermore, the stretch ratio derived from the model applies to the geometrical optimization of the deformed membrane.

• 한국인터넷방송통신학회논문지
• /
• 제14권1호
• /
• pp.101-107
• /
• 2014

본 논문에서는 협업 필터링 알고리즘을 클러스터링 기반으로 분산 환경에서 구현하여, 추천을 위한 수행 시간을 최적화 하는 방법에 대한 제안을 한다. 하둡 기반으로 시스템을 구성하였고, 분산 Min-hash 클러스터링 기반의 협업 필터링 방법을 제안하고, 이를 기반으로 분산 추천 시스템을 구성하였다. 분산 사용자 기반 협업 필터링 기법을 사용하여 무비렌즈 (Movie Lens)의 영화 평점 데이터를 기반으로 각각의 사용자에게 알맞은 영화를 추천해주는 분산추천 시스템을 구현하고 실험을 통하여 성능의 우수성을 검증하였다.

• 한국광학회지
• /
• 제34권2호
• /
• pp.53-60
• /
• 2023

193 nm에서 반도체 전공정 검사 장치에 적용될 수 있는 반사 굴절 혼합 형식(카타디옵트릭)의 수치 구경(numerical aperture, NA) 0.6 대물렌즈를 설계하였다. 200 nm 공간 분해능 및 0.15 mm 이상의 시야를 확보하기 위하여, 먼저 렌즈 전체 배치를 포커싱 렌즈 그룹, 필드 렌즈 그룹 및 NA 변환 그룹으로 구성하였으며, 선행 그룹에 포커싱된 빔의 수치 구경 값을 필요 값, 즉 0.6으로 변환하는 기능을 수행한다. 총 11매의 광학 소자로 구성된 최종 설계는 모든 관측 시야에 대하여 λ/80 이하의 RMS 파면 수차를 만족하였다. 또한 고분해능 대물렌즈의 높은 환경 민감도로 인한 온도 변화에 따른 광학계 성능 해석 결과, ±0.1 ℃의 온도 변화에서도 목표 성능 이하로의 성능 저하가 확인되어 온도 변화에 따른 광학 보상이 반드시 필요하였다. 이에 초점면 이동을 보상자로 적용할 경우, 20 ± 1.2 ℃까지 RMS 파면 수차 변화량이 λ/30 이하로 목표 성능을 만족하여 실제 반도체 공정 환경에서도 이용이 가능함을 확인하였다.

• 대한원격탐사학회지
• /
• 제35권1호
• /
• pp.1-13
• /
• 2019

The advent of a fourth industrial revolution, built on advances in digital technology, has coincided with studies using various unmanned aerial vehicles (UAVs) being performed worldwide. However, the accuracy of different sensors and their suitability for particular research studies are factors that need to be carefully evaluated. In this study, we evaluated UAV photogrammetry using smart technology. To assess the performance of digital photogrammetry, the accuracy of common procedures for generating orthomosaic images and digital surface models (DSMs) using terrestrial laser scanning (TLS) techniques was measured. Two different type of non-surveying camera(Smartphone camera, fisheye camera) were attached to UAV platform. For fisheye camera, lens distortion was corrected by considering characteristics of lens. Accuracy of orthoimage and DSM generated were comparatively analyzed using aerial and TLS data. Accuracy comparison analysis proceeded as follows. First, we used Ortho mosaic image to compare the check point with a certain area. In addition, vertical errors of camera DSM were compared and analyzed based on TLS. In this study, we propose and evaluate the feasibility of UAV photogrammetry which can acquire 3 - D spatial information at low cost in a construction site.

• 제어로봇시스템학회논문지
• /
• 제13권5호
• /
• pp.499-506
• /
• 2007

The tiny camera module used in a modern cellular phone requires precise assembly processes. To meet the requirement of high resolution and functionality, the number of parts used in a camera module becomes larger and larger. As the market grows rapidly, an automatic camera phone assembly process is required. However, diverse production line and short life cycle make it difficult to build an affordable assembly line. To attack this problem, a flexible and expandable lens assembly system is proposed. To save the manufacturing line set-up time, modular concept is adopted. Also, each module is designed to have intelligence to simplify the set-up process. The assembly system is built up on the standard flat-form that includes a vibration free base, air and electric supplies, and electronic controllers, etc. Furthermore, the assembly cell has the capability of handling tiny, thin, or transparent parts which are very difficult to identify without machine vision.