• KIEAE Journal
• /
• 제14권4호
• /
• pp.61-68
• /
• 2014

Due to rapid climate changing and the need for energy conservation, environment friendly initiatives have emerged, and regulations to support establishment of green structures in construction have been legislated and enacted. In this study, the supporting of green build method act for rapid climate change and energy conservation. Using green build method, protecting surrounding ecosystem and developing green building continuously, I suggest alternative for protection of the environment. Identifies Envelope Design Elements among various construction Green Building Design Guidelines. Green buildings that we extract the Green Building envelope design from Design Guideline, select the object building through the green buildings examples of public institution relocation projects. Since then analyzes the planned schematic design and Green Envelope Design Elements and Green Building Certification(G-SEED). So, that future directions for planning correlation of Green Building and Design Guidelines about Green Design Elements Can be presented.

• Wind and Structures
• /
• 제22권2호
• /
• pp.133-160
• /
• 2016

Hurricanes are among the most costly natural hazards to impact buildings in coastal regions. Building roofs are designed using the wind load provisions of building codes and standards and, in the case of large buildings, wind tunnel tests. Wind permeable roof claddings like roof pavers are not well dealt with in many existing building codes and standards. The objective of this paper is to develop simple guidance in code format for design of loose-laid roof pavers. Large-scale experiments were performed to investigate the wind loading on concrete roof pavers on the flat roof of a low-rise building in Wall of Wind, a large-scale hurricane testing facility at Florida International University. They included wind blow-off tests and pressure measurements on the top and bottom surfaces of pavers. Based on the experimental results simplified guidelines are developed for design of loose-laid roof pavers against wind uplift. The guidelines are formatted so that use can be made of the existing information in codes and standards such as American Society of Civil Engineering (ASCE) 7-10 standard's pressure coefficients for components and cladding. The effects of the pavers' edge-gap to spacer height ratio and parapet height to building height ratio are included in the guidelines as adjustment factors.

• 토지주택연구
• /
• 제10권4호
• /
• pp.1-12
• /
• 2019

The purpose of this study is to set the direction of development of the design guideline of the New-Hanok-Style public building in apartment complex and to use it as basic data for future architecture plans. The existing Hanok architecture standards and guidelines were analyzed and the characteristics of New-Hanok-Style Public Building in apartment complex were applied. The planning direction of the design guideline was derived. First, although the criteria and guidelines related to the Hanok produced and distributed were classified differently according to the purpose of production, the details and contents were similar. Second, the general planning criteria items were divided into layout, external space plan, building plan, and performance plan. Third, the elements of 'creative inheritance of traditional architecture' and 'modern building technology', which are the characteristics of New-Hanok-Style Public Building, were applied. In addition, we analyzed elementary welfare facility guidelines and applied elements such as layout type and zoning setting. Fourth, a special planning standard for applying the building system required for the New-Hanok-Style Public Building in apartment complex was added. In the future, it is expected to revitalize New-Hanok-Style Public Building containing the unique identity(genetic factor; DNA) of the nation by developing and disseminating relevant building standards, design guidelines, and maintenance manuals.

• 한국주거학회논문집
• /
• 제19권4호
• /
• pp.21-29
• /
• 2008

The purpose of this study is to evaluate preferences for spatial composition by urban design guidelines of detached housing areas using CG simulation, with the aim of contributing to the improvement and management of residential townscapes. The list of urban design guidelines for detached housing areas was derived from an analysis of urban design guidelines and landscape regulations from the U.S.A, Japan, and Korea. These guidelines comprise building guidelines, landscape guidelines, street guidelines, and sign guidelines. Through the preferences revealed by CG simulation, an optimum presentation method for the urban design guidelines was determined. Based on the results of preferences, an appropriate management system and regulation standards were proposed. In conclusion, the efforts carried out on the study and legislation of a management system and regulation standards for the urban design guideline will accomplish the amenity of residential environments.

• 한국주거학회논문집
• /
• 제14권2호
• /
• pp.1-7
• /
• 2003

The purpose of this study is to develop the urban design guidelines in detached housing areas for the improvement and management of residential townscape. Through a detail examination and analysis of the urban design guidelines and landscape regulations of U.S.A, Japan, and Korea to be applied to detached housing area for residential townscape, the urban design guidelines in detached housing area was derived. Urban design guidelines are composed of building guidelines, landscape guidelines, street guidelines, and sign guidelines. The municipality have to make regulations in detached housing area for the improvement and management of residential townscape based on this urban design guidelines.

• 한국화재소방학회논문지
• /
• 제30권4호
• /
• pp.6-13
• /
• 2016

건축물에서의 연기제어 시스템과 관련하여 국내에서는 거실에 대한 배연기준과 피난계단 및 부속실에 대한 제연기준이 제시되고 있으나, 대형화 고층화 복합화 되어가는 첨단 건축물에 대한 적용성을 검토하면 국내 설계기준에 따른 연기제어 시스템은 화재시 연기안전을 확보하기 곤란할 수 있다. 따라서 대형 고층 복합의 첨단 건축물에 대한 화재시 연기안전성을 높이고 화재와 건축물 특성에 따른 상호 연기제어 연계성 확보와 통합적 설계가 가능한 성능위주 연기제어의 적용이 요구된다. 본 논문에서는 국내 연기제어 기준을 분석하고 개선이 필요한 부분을 제시하였으며, 선진외국에서의 성능위주 설계 수행에 대한 법체계와 성능위주 연기제어 설계의 지침을 조사하고 분석하였다.

• 한국CDE학회논문집
• /
• 제20권2호
• /
• pp.210-219
• /
• 2015

As various contractors have been asking BIM data in the construction industry, BIM guidelines and standards has become increasingly important these days. Above all, BIM guidelines should be established properly because it is utilized at the earliest stage of BIM data creation. However, each of the existing BIM guidelines was totally different by contractors, disciplines or phases so that it caused problems about repetitious work, inefficient management and so on. In order to overcome these problems, we suggest integrated management system for BIM guidelines. We firstly collected and analyzed existing guidelines, secondly standardized guideline phrases and lastly constructed data structure of integrated management system. This integrated management system is expected to increase work efficiency to avoid working error for designers and enable easy creation or revision of BIM guidelines for contractors.

• 한국조경학회지
• /
• 제32권3호
• /
• pp.76-90
• /
• 2004

The purpose of this study is to extract landscape design elements regulation of the District Unit Plan(DUP) in new town areas, and to find out characteristics in terms of urban design elements in comparison with the psychological and physical aspects. For this purpose, we reviewed urban design elements and design elements in terms of the landscape by DUP and analyzed the activation of landscape on the selected case-area by interviewing experts such as planners, public officials, and professors in the department of urban planning and landscape, as well as the university students. The analysis framework for the case-study consists of 4 components: the section of region, street, building, open space, etc. The new development areas in Daejeon Metropolitan City was chosen as the case study area, because they have been developed by DUP regulations. As a result of this study, we can extract characteristics of landscape. The results indicate that `skyline design',`view corridor design',`landscape design',`street furniture design' and `building design(form, height, color, and elevation)' are the key planning and design factors influencing differences in the landscape preference. This research identifies that there are no detailed planning and design guidelines adopted within the four case study areas in Daejeon for regulating the characteristics of skyline, planting and street furniture while detailed guidelines established for density, building height and site layout. Considering their significant correlation with the level of landscape preference, this study suggests that detailed planning and design guidelines for the characteristics of skyline, rooftop and streetscape should be established in future DUP.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.21-25
• /
• 2008

It is the aim of this study to investigate the fire resistance design Guidelines for high-strength concrete structure for example compressive strength more than 40Mpa. It is well know that explosive spalling due to fire attack of high strength concrete is related to concrete failure. so, the purpose of this study introduce the fire A Studty on the Fire Resistance Design Guidelines for High-Strength Concrete Structures of AIK for the response of explosive spalling of high strength concrete.

• 한국태양에너지학회 논문집
• /
• 제34권5호
• /
• pp.81-87
• /
• 2014

According to the domestic construction business will continue stagnant, many domestic construction companies are expanding their business into foreign countries. As results, building design guidelines including HVAC design for foreign countries considering the regional climate conditions are needed. Also, green building design strategies to minimize the heating and cooling load are key issue to win a contract in construction business in the world. In this study, peak heating and cooling loads were calculated for the representative cities in the world : Seoul, St. Petersburg, Singapore and Mecca. The analyzed building was a typical high-rise office building and the building envelope properties, indoor heat gain, residence and operating schedules were same in all cases. Only the weather conditions were different by cases.