• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2002.04a
• /
• pp.58-61
• /
• 2002

A high-rise Mixed-use building is a multi-purpose which has commercial, business and residential uses. In Korea, after the middle of 1990's, the rate of residential parts was Increased to 90%. Now, the residential parts finally bacame mainly. And residental spaces are more important than before. Residential spaces are according to variety trends such in their areas. Some companies have several interior design trend in their building. They sometimes use the interior trend when to sell their goods(apartments) in their macketing. Modern design is presented in almost dwelling-units-types. But Classic type is presented in large-units-types. Minimal design is presented in only some middle-units-type as well as in the cases of the companies having definite interior trend. Interior design trend is one another factor in dwelling spaces design.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2001.11a
• /
• pp.130-135
• /
• 2001

In this study, I have researched into the causes of defects in apartment house, The results of this study are listed below. (1) Water leakages which result from land sinking and cracks, results of misuse of back filling method, are the main reason of defects in civil engineering work and architectural work. (2) Inexperience and unwillingness are the main reason of defects in plaster work. (3) In windows work and painting work, the main reasons are lacks of precision construction and efflorescence resulting from outdoor air, respectively. (4) Defects in waterproofing work and electric work result from fault construction by low unit Costs. (5) Equipment work requires uses of standardized construction materials and management, and landscape architecture work requires minimizing human mistakes, for instance, degin carelessness. For the reasons stated above, the causes of defects in apartment house are insufficient construction labors, inferior construction materials, urgent construction process time, and conscientiousless industrialists who only seek after a profit margin.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.10a
• /
• pp.115-118
• /
• 2005

Korea has experienced many changes since modern hospitals started to be built. Among these changes, interest in 'Promotion of Curing environment', which is the most fundamental one of the hospital functions, has increased more and more. The lobby makes the first impression of a medical building and that is an important function. Recently, the lobby became highly valued not only as a waiting area or a pathway only but as a cultural area. The lobby is considered simply as a complex and busy area because it plays an important role in the building' communications and access systems and has various uses and functions. Based on the concept of curing environment, the lobby can be planned as a facility combining culture and medical functions by applying multi therapy.

• Proceedings of the KAIS Fall Conference
• /
• 2001.11a
• /
• pp.104-106
• /
• 2001

This paper presents the usage of software package APM WinMachine for design of train car elements. APM software uses fur maximization of design productivity and efficiency in designing and evaluation machine elements and systems and CAD modeling. In process of machine designing needs make strength calculations of machine parts with complecated design. Will the help of APM software strength calculations can be done quickly. On the Demichovo machine-building plant with the use of APM software were made quickly and effectively strength calculations of the cradle of the suspension of air-conditioner of car train and the mounting brackets of a tank of train toilet.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.6
• /
• pp.766-771
• /
• 2006

In this paper, we focus on the building domain ontology from corpus by extracting concepts and properties relationships based on linguistic patterns. The pharmacy field is selected as an experiment domain and we present an algorithm to extract hierarchical structure for terminology based on the noun/suffix patterns of terminology in domain texts. In order to show usefulness of our domain ontology, we compare a typical keyword based retrieval method with an ontology based retrieval mettled which uses related information in an ontology for a related feedback. As a result, our method shows the improvement of precision by 4.97% without losing recall.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.116-117
• /
• 2019

In this research, Proctor insertion resistance test values and Durometer A type hardness values were compared and analyzed between the setting times of the concrete using CGS for Fine Aggregate, and the results are summarized as follows. 1) The Proctor penetration resistance test value and the hardness value of Durometer A type showed a high correlation in the form of a curve. 2) About surface finish The resolution exceeding the hardness value of the Durometer A type uses about 25 HD, and in the case of termination, about 35 HD, and is considered to be effective for determining the surface finishing work time. The possibility to do is expected.

• Structural Engineering and Mechanics
• /
• v.5 no.2
• /
• pp.137-148
• /
• 1997

In computing eigenvalues for a large finite element system it has been observed that the eigenvalue extractors produce eigenvectors that are in some sense more accurate than their corresponding eigenvalues. From this observation the paper uses a patch type technique based on the eigenvector for one mesh quality to provide an eigenvalue error indicator. Tests show this indicator to be both accurate and reliable. This technique was first observed by Stephen and Steven for an error estimation for buckling and natural frequency of beams and two dimensional in-plane and out-of-plane structures. This paper produces and error indicator for the more difficult problem of three dimensional brick elements.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.5
• /
• pp.41-52
• /
• 2019

The purpose of the work is to develop a simple solar irradiance prediction model using a deep learning method, the LSTM (long term short term memory). Other than existing prediction models, the proposed one uses only the cloudiness among the information forecasted from the national meterological forecast center. The future cloudiness is generally announced with four categories and for three-hour intervals. In this work, a daily irradiance pattern is used as an input vector to the LSTM together with that cloudiness information. The proposed model showed an error of 5% for learning and 30% for prediction. This level of error has lower influence on the load prediction in typical building cases.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.96-101
• /
• 2021

The SLAM market is growing rapidly with advances in Machine Learning, Drones, Augmented Reality technologies. However, due to the absence of an open source-based SLAM library for developing AR content, most SLAM researchers are required to conduct their own research and development to customize SLAM. In this paper, we propose an opensource-based Mobile Markerless AR System by building our own pipeline based on Visual SLAM. To implement the Mobile AR System of this paper, it uses ORB-SLAM3 and Unity Engine and We experimented with running our system in a real environment and confirming it in the Unity Engine's Mobile Viewer. Through this experimentation, we can verify that the Unity Engine and the SLAM System are tightly integrated and communicate smoothly. Also, we expect to accelerate the growth of SLAM technology through this research.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.213-214
• /
• 2021

External insulation method is used to conserve energy of buildings. However, the current external insulation method uses organic insulating materials to become a diffusion path in case of fire. In this study, the purpose of this study is to provide basic data on the required performance of the plastering material according to the CaCO₃ powder addition of the finishing material of the external insulation method. In Figure 1, when powder was added, the adhesion strength decreased by 30% to 35% at 10% and 0% to 50% at 20% compared to Plain. In Figure 2, the moisture permeability increases approximately twice when powder is added. The results for the water absorption coefficient are shown in Figure 3.