• 제목/요약/키워드: Building Drag Effect

검색결과 16건 처리시간 0.025초

도시 협곡에서 수목이 흐름과 스칼라 물질 확산에 미치는 영향 (Effects of Trees on Flow and Scalar Dispersion in an Urban Street Canyon)

  • 강건;김재진
    • 대기
    • /
    • 제25권4호
    • /
    • pp.685-692
    • /
    • 2015
  • In this study, the effects of trees on flow and scalar dispersion in an urban street canyon were investigated using a computational fluid dynamics (CFD) model. For this, we implemented the drag terms of trees to the CFD model, and compared the CFD-simulated results to the wind-tunnel results. For comparison, we considered the same building configuration as the wind-tunnel experiment. The trees were located at the center of street canyon with the aspect ratio (defined as the ratio of the street width to the building height) of 1. First, the flow characteristics were analyzed in the tree-free and high-density tree cases and the results showed that the CFD model reproduced well the flow pattern of the wind-tunnel experiment and reflected the drag effect of trees in the street canyon. Then, the dispersion characteristics of scalar pollutants were investigated for the tree-free, low-density tree and medium-density tree cases. In the tree-free case, the nondimensionalized concentration distribution simulated by the CFD model was quite similar to that in the wind-tunnel experiment in magnitude and pattern. The correlation coefficients between the measured and simulated concentrations are more than 0.9 in all the cases. As the tree density increased, nondimensionalized concentration increased (decreased) near the wall of the upwind (downwind) building, which resulted from the decrease in wind speed case by the drag effect of trees. However, the CFD model underestimated (overestimated) the concentration near the wall of upwind (downwind) building.

Wind tunnel study of wind loading on rectangular louvered panels

  • Zuo, D.;Letchford, C.W.;Wayne, S.
    • Wind and Structures
    • /
    • 제14권5호
    • /
    • pp.449-463
    • /
    • 2011
  • Drag forces on a rectangular louvered panel, both as a free-standing structure and as a component in a generic low-rise building model, were obtained in a wind tunnel study. When tested in a building model, the porosity ratio of the wall opposite the louvered panel was varied to investigate its effect on the loading of the louvered panel. Both mean and pseudo-steady drag coefficients were obtained. Comparisons with the provisions for porous walls in contemporary loading standards indicate that for some opposite wall porosity ratios, the standards specify significantly different wind loads (larger and smaller) than obtained from this wind tunnel study.

도시 재개발이 도시 지역 상세 대기 흐름에 미치는 영향 (The Effects of an Urban Renewal Plan on Detailed Air Flows in an Urban Area)

  • 이주현;최재원;김재진;서용철
    • 한국지리정보학회지
    • /
    • 제12권2호
    • /
    • pp.69-81
    • /
    • 2009
  • 본 연구에서는 전산유체역학 모델을 이용하여 도시 재정비에 따른 신축 건물이 주변 대기 흐름에 미치는 영향을 조사하였다. 이를 위하여 지리정보시스템 자료로부터 추출한 건물 자료를 전산유체역학 모델의 입력 자료로 사용하였고 4가지 풍향 (서풍, 남풍, 동풍, 북풍)에 대한 수치 시뮬레이션을 수행하였다. 도시 재정비가 이루어지기 전에는 저층 건물이 밀집되었기 때문에 건물에 의한 마찰 효과가 증가하면서 건물 사이 공간의 풍속이 현저하게 감소하였다. 도시 재정비 계획에 따라 고층 건축물이 신축되고 밀집된 건물이 정비되면서 보행자 고도에서는 건물에 의한 마찰 효과가 감소하였다. 그리고 질량연속방정식을 만족시키기 위한 channeling 효과가 부분적으로 나타나면서 도시 재정비 지역의 풍속이 증가하였다. 상층에서는 고층 건물이 신축되면서 건물 사이에서 일어나는 channeling 효과에 의해 부분적으로 풍속이 증가하였다. 그러나 도시 재정비 지역의 풍하지역에서는 건물에 의해 형성되는 재순환 영역 (recirculation region)과 마찰 효과에 의해 넓은 지역에서 풍속이 현저하게 감소하였다.

  • PDF

Aerodynamic modification of setback distance at half height of the tall building to minimize the wind effect

  • Bairagi, Amlan Kumar;Dalui, Sujit Kumar
    • Wind and Structures
    • /
    • 제35권3호
    • /
    • pp.193-211
    • /
    • 2022
  • The present study focuses on aerodynamic parameters behaviors and control on the single and double side setback building models at the buildings mid-height. The study is conducted by computational fluid dynamics (CFD) simulation. This study estimates the face wise pressure coefficient on single side setback buildings with a setback range of 20%-50% and double side setback buildings with setbacks ranging from 10%-25%. The polynomial fitted graphs from CFD data predict the Cp on different setback model faces within permissible limit ±13% error. The efficient model obtained according to the minimum drag, lift, and moment consideration for along and across wind conditions. The study guides the building tributary area doesn't control the drag, lift, and moment on setback type buildings. The setback distance takes a crucial role in that. The 20% double side setback model is highly efficient to regulate the moment for both along and across wind conditions. It reduces 17.5% compared to the 20% single side setback and 14% moment compared to the 10% double side setback models. The double side setback building is more efficient to control 4.2% moment than the single side setback building

Interference effects in a group of tall buildings closely arranged in an L- or T-shaped pattern

  • Zhao, J.G.;Lam, K.M.
    • Wind and Structures
    • /
    • 제11권1호
    • /
    • pp.1-18
    • /
    • 2008
  • Interference effects in five square tall buildings arranged in an L- or T-shaped pattern are investigated in the wind tunnel. Mean and fluctuating shear forces, overturning moments and torsional moment are measured on each building with a force balance mounted at its base. Results are obtained at two values of clear separation between adjacent buildings, at half and a quarter building breadth. It is found that strong interference effect exists on all member buildings, resulting in significant modifications of wind loads as compared with the isolated single building case. Sheltering effect is observed on wind loads acting along the direction of an arm of the "L" or "T" on the inner buildings. However, increase in these wind loads from the isolated single building case is found on the most upwind edge building in the arm when wind blows at a slight oblique angle to the arm. The corner formed by two arms of buildings results in some wind catchment effect leading to increased wind pressure on windward building faces. Interesting interference phenomena such as negative drag force are reported. Interference effects on wind load fluctuations, load spectra and dynamic building responses are also studied and discussed.

유공형 도로표지의 항력계수에 대한 실험적 연구 (Experimental Investigation of the Drag Coefficient of Porous Road Signs)

  • 성홍기;정규수
    • 한국산학기술학회논문지
    • /
    • 제19권2호
    • /
    • pp.71-76
    • /
    • 2018
  • 최근 도로시설물에 작용되는 하중을 저감시키기 위하여 다양한 기술이 개발되고 있으며, 그 중 풍하중 저감을 위한 유공판을 사용하는 기술이 일부 적용 중에 있다. 현재 국내 도로시설물 설계기준에서는 유공판의 항력계수에 대한 규정은 마련되어 있지 않다. 미국의 구조물 설계기준 'Minimum design loads for buildings and other structures'에서는 Letchford(2001)와 Giannoulis(2012)의 연구 내용을 바탕으로 건축물과 도로시설물의 유공판 항력계수 내용이 개정되었다. 본 연구에서는 유공판 항력계수 규정에 대한 준용 가능성을 분석하고자 관련 풍동실험을 수행하였다. 더불어 풍동실험 결과 값과 미국 설계기준의 항력계수 값을 비교 분석하였으며, 미국 설계기준 항력계수를 적용한 도로표지 지주 및 가로재의 부재 단면적 감소효과를 비교 분석하였다. 본 연구의 풍동 실험 결과 값과 미국 설계기준 값이 매우 유사한 수준으로 도출되었으며, 이에 따라 유공판 항력계수에 대한 준용이 가능할 것으로 판단된다. 항력계수 설계기준의 준용에 따른 유공형 도로표지 구조물의 단면적 감소효과 분석 결과, 지주는 약 9.45%, 가로재는 6.45%의 단면적이 감소하였다. 지주와 가로재를 합친 유공형 도로표지의 전체 구조물은 약 6.45%의 단면적 감소효과가 있는 것으로 나타났다.

Large eddy simulation of flow over a wooded building complex

  • Rehm, R.G.;McGrattan, K.B.;Baum, H.R.
    • Wind and Structures
    • /
    • 제5권2_3_4호
    • /
    • pp.291-300
    • /
    • 2002
  • An efficient large eddy simulation algorithm is used to compute surface pressure distributions on an eleven story (target) building on the NIST campus. Local meteorology, neighboring buildings, topography and large vegetation (trees) all play an important part in determining the flows and therefore the pressures experienced by the target. The wind profile imposed at the upstream surface of the computational domain follows a power law with an exponent representing a suburban terrain. This profile accounts for the flow retardation due to friction from the surface of the earth, but does not include fluctuations that would naturally occur in this flow. The effect of neighboring buildings on the time dependent surface pressures experienced by the target is examined. Comparison of the pressure fluctuations on the single target building alone with those on the target building in situ show that, owing to vortices shed by the upstream buildings, fluctuations are larger when such buildings are present. Even when buildings are lateral to or behind the target, the pressure disturbances generate significantly different flows around this building. A simple grid-free mathematical model of a tree is presented in which the trunk and the branches are each represented by a collection of spherical particles strung together like beads on a string. The drag from the tree, determined as the sum of the drags of the component particles, produces an oscillatory, spreading wake of slower fluid, suggesting that the behavior of trees as wind breakers can be modeled usefully.

도로터널 화재시 차량의 항력계수가 제연용 제연팬에 미치는 영향에 대한 해석적 연구 (A numerical study on effects of drag coefficient of vehicle on jet fans in case of fire in road tunnels)

  • 유용호;유지오;김효규
    • 한국터널지하공간학회 논문집
    • /
    • 제16권6호
    • /
    • pp.553-560
    • /
    • 2014
  • 도로터널에서는 환기 및 제연을 목적으로 제연펜을 설치하고 있다. 제연펜 용량(제트팬 댓수)은 환기저항 및 승압력이 평형이 되는 상태에서 결정되게 된다. 터널에 운행중이거나 정지된 차량에 의한 승압력 및 저항력은 차량의 항력계수에 영향을 받게 된다. 터널에서의 항력계수는 슬립스트림 효과(또는 shadow effect)와 폐색효과에 영향을 받게 되며, 환기팬 및 제연팬 산정시 이와 같은 효과를 적절히 고려하지 못하고 있는 실정으로 교통 환기력를 과대평가하고 있다. 이에 본 연구에서는 화재시 차량의 차간간격을 반영한 항력계수와 등가저항면적을 산정하기 위해서 터널에 실제로 차량이 정차하는 조건으로 모델링하여 수치해석을 통해 항력계수를 검토하였다. 본 연구 결과, 항력계수에 대형차량 혼입률이 미치는 영향은 명확하지 않으며, 등가저항면적은 현행 도로설계편람기준에 대비 약 86%, 또 구 기준인 한국도로공사 환기설계기준 대비 62.2%수준으로 감소하는 것으로 분석되었다.

회전하는 원형 실린더 주위 층류유동장의 수치 시뮬레이션 (Numerical Simulation on Laminar Flow past a Rotating Circular Cylinder)

  • 박종천;문진국;윤현식;이병혁;전호환;서성부
    • 한국해양공학회지
    • /
    • 제19권3호
    • /
    • pp.1-10
    • /
    • 2005
  • The effect of rotation on the unsteady laminar flaw past a circular cylinder is numerically investigated in the present study. The numerical solutions for the 2D Navier-Stokes equation obtained, using two different numerical methods. One is an accurate spectral method and the other is a finite volume method(FVM). First, the flaw around a stationary circular cylinder is investigated to understand the basic phenomenon of flaw separation and bluff body wake. Next, the flow characteristics of the laminar flow, past a rotating circular cylinder, are investigated, using a FVM developed in this study. By the effect of rotation, it is seen that values of lift increase, while the values of mean drag decrease. Further, the criteria of angular velocity, at which the Karman vorteces disappear, is also determined.

피치각과 날개 길이에 따른 축류팬의 성능 (Effect of Pitch Angle and Blade Length on an Axial Flow Fan Performance)

  • 전성택;조진표
    • 설비공학논문집
    • /
    • 제25권1호
    • /
    • pp.43-48
    • /
    • 2013
  • In this study, the performance of an impeller according to blade length and pitch angle was studied experimentally by building a variable pitch impeller while changing blade length to review the effect of blade length and pitch angle on a fan's performance. The pitch angle was changed in six steps from $20^{\circ}{\sim}45^{\circ}$ at intervals of $5^{\circ}$ while the blade lengths were changed to 90 mm, 100 mm, 110 mm and 120 mm with an identical airfoil shape while carrying out the experiment. The results are summarized as follows: The air flow per static pressure of axial fans increased linearly with increase of pitch angle, but the high static pressure showed a decrease at a pitch angle of $35^{\circ}$. The shaft power increased proportionally to the pitch angle at all blade lengths; the larger the pitch angle, the larger the measured increase of shaft power. This is because the drag at the fan's front increases with the pitch angle. In the axial fans considered in this research, the flow and increase of static pressure amount increased up to a pitch angle of $30^{\circ}$ but decreased rapidly above $35^{\circ}$.