• Journal of Korean Society of Steel Construction
• /
• v.26 no.3
• /
• pp.155-167
• /
• 2014

Steel-concrete composite beam has been used for a considerable time in building construction. An essential component of a composite beam is the shear connection between the steel section and the concrete slabs, which is provided by mechanical shear connectors. A variety of shapes and devices have been in use as shear connectors. This study summarizes the results of an experimental investigation involving the testing of push-out specimens with angle shear connectors. All of 22 push-out specimens were designed to study the effect of a number of parameters on the shear capacity of angle shear connectors such as the height of the angle connector, the length of welding, and the pitch of angles. Based on the test results, a design equation was developed for predicting the shear strength of angle shear connectors.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.1
• /
• pp.25-36
• /
• 2020

In a redox transition zone, geochemical reactions are facilitated by active bacteria that mediate reactions involving electrons, and arsenic (As) and iron (Fe) cycles are the major electron transfer reactions occurring at such a site. In this study, the effect of repetitive redox changes on soil bacterial community in As-contaminated soil was investigated. The results revealed that bacterial community changed actively in response to redox changes, and bacterial diversity gradually decreased as the cycle repeated. Proportion of strict aerobes and anaerobes decreased, while microaerophilic species such as Azospirillum oryzae group became the predominant species, accounting for 72.7% of the total counts after four weeks of incubation. Bacterial species capable of reducing Fe or As (e.g., Clostridium, Desulfitobacterium) belonging to diverse phylogenetic groups were detected. Indices representing richness (i.e., Chao 1) and phylogenetic diversity decreased from 1,868 and 1,926 to 848 and 1,121, respectively. Principle component analysis suggests that repetitive redox fluctuation, rather than oxic or anoxic status itself, is an important factor in determining the change of soil bacterial community, which in turn affects the cycling of As and Fe in redox transition zones.

• Journal of Society of Preventive Korean Medicine
• /
• v.6 no.1
• /
• pp.36-50
• /
• 2002

Health industry, a knowledge based high value-added industry, is being considered as a strategic area for the 21C and many advanced countries are making every endeavors for the promotion of health industry along with information technology, new materials, and mechatronics. Korean health industry, however, has been excluded from the governmental supports as well as bound by strict regulation so far, and there is a significant gap in technology compared with advanced countries. In 21C, technology is the main factor of national competitiveness and that is why the role of R&D institutes are so important in the high level of competition to cope with the technology protection policies of advanced countries. In this article, with Directory of Korean R&D Institutes published by Korea Industry Technology Association, I reviewed the trends of R&D institute of health industry. Main findings of the research can be summarized as follows. The portion of health industry R&D institute is 3.6% of total R&D institute but the amount of R&D investment is over than 5% This means health industry are knowledge based and R&D intensified industry, meanwhile the variations of same industry R&D institutes of health industry is huge in R&D investments and other activities. Regional distributions of health industry institutes show some kind of different patterns in each industry areas. Medical devices and Medical informatics's preference of metropolitan region are distinguished with other industry areas. Many of the institutes are located in same site of it's company rather than operating separate building for R&D specific uses. It is better for transforming ideas to products and close cooperation of research body with product lines, but it is a handicap for networking and communicating with other research institutions too. It takes 18.4yrs for bearing R&D institute on the average. For a long times 'copy products' or 'me too products' policies were easy way to maintain business entities. But recently, it is recognized that research activities are essential component of sustaining it's own business firms. This means technology itself is leading power of corporation itself in the high level of competition.

• Korean Journal of Cognitive Science
• /
• v.4 no.2
• /
• pp.85-114
• /
• 1994

One of the major research topics in the area of the development of intelligent tutoring system(ITS)is the control of instructional mechanism consisting of lesson plans,curriculum plans,and discourse plans.This paper describes a method of building the lesson plans among these three instructional plans based on the case-based planning.It is more efficient to retrieve the lesson plan from the plan memoru than to generate it whenever an instructional goal is selected.The retrieved lesson plan may be modified to build more adaptive plan for the current goal.We have developed a lesson plan generator that has such capabilities as a component of an ITS for teching indefinite intergration.We also have devised a description language to represeint the generalized form for the given arithmetic expression as an instructional goal and a curriculum tree to represent the lesson units required to master the subject matter.The result of this research could be used either by a developer of the lesson plan generator in the other area of ITS or by human teacher as a curriculum in the actual class.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1725-1731
• /
• 2004

The use of gestures provides an attractive alternate to cumbersome interface devices for human-computer interaction. This has motivated a very active research area concerned with computer vision-based analysis and interpretation of hand gestures. The most important issues in gesture recognition are the simplification of algorithm and the reduction of processing time. The mathematical morphology based on geometrical set theory is best used to perform the processing. A key idea of proposed algorithm in this paper is to apply morphological shape decomposition. The primitive elements extracted to a hand gesture include in very important information on the directivity of the hand gestures. Based on this characteristic, we proposed the morphological gesture recognition algorithm using feature vectors calculated to lines connecting the center points of a main-primitive element and sub-primitive elements. Through the experiment, we demonstrated the efficiency of proposed algorithm. Coupling natural interactions such as hand gesture with an appropriately designed interface is a valuable and powerful component in the building of TV switch navigating and video contents browsing system.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.561-564
• /
• 2009

In order to reduce damage from natural disasters, prevention activities through analysis and predicting based on meteorological factor and damage data is required. Other countries already have continuously studied on natural disasters and developed reducing disasters damage. But the risk assessment model for natural disaster is not to Korea. Therefore, a previous model of hurricane, Florida Public Hurricane Loss Model(FPHLM), is the basis and is applying to domestic situation. Accordingly, this study introduces the variables selecting process because input variables should be selected under Korea present state and be used. The estimating representative damage method would be necessary along with selecting housing types representing relevant areas because estimating damage amount of all over relevant areas housing was very hard during damage estimating process. But there is no exact representative housing types in the Korea. Therefore, we select housing types applicable to risk assessment model for natural disasters representing the Korea through previous studies and literature reviews. We using ASCE 7-98(Minimum Design Loads for Buildings and Other Structures, 1998) standard which estimated wind load using 3-second gust. ASCE 7-98 divided Main Wind Force Resistance System(MWFRS) and Component and Cladding(C&C) and it estimated wind load. Therefore, we estimate wind load affected by 3-second gust of a typhoon Maemi through calculating wind load process using selected representative detached house types in the process of selecting input variables for previous disaster predict model. The result of houses damage amount is about 230 hundred million won. This values are limit the 1-story detached dwelling, 19~29pyeong(62.81~95.56 $m^2$) of total area and flat roof. Therefore, this process is possible application to other type houses.

• Steel and Composite Structures
• /
• v.18 no.6
• /
• pp.1423-1450
• /
• 2015

The paper presents the details and results of an experimental study on bolted end-plate joints of industrial type steel building frames. The investigated joints are commonly used in Lindab-Astron industrial buildings and are optimized for manufacturing, erection and durability. The aim of the research was to provide an experimental background for the design model development by studying load-bearing capacity of joints, bolt force distribution, and end-plate deformations. Because of the special joint details, (i.e., joints with four bolts in one bolt-row and HammerHead arrangements), the Eurocode 3 standardized component model had to be improved and extended. The experimental programme included six different end-plate and bolt arrangements and covered sixteen specimens. The steel grade of test specimens was S355, the bolt diameter M20, whereas the bolt grade was 8.8 and 10.9 for the two series. The end-plate thickness varied between 12 mm and 24 mm. The specimens were investigated under pure bending conditions using a four-point-bending test arrangement. In all tests the typical displacements and the bolt force distribution were measured. The end-plate plastic deformations were measured after the tests by an automatic measuring device. The measured data were presented and evaluated by the moment-bolt-row force and moment-distance from centre of compression diagrams and by the deformed end-plate surfaces. From the results the typical failure modes and the joint behaviour were specified and presented. Furthermore the influence of the end-plate thickness and the pretension of the bolts on the behaviour of bolted joints were analysed.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.473-477
• /
• 2007

Industry for artificial joint is a complex one based on various technologies, including mechanics, biotechnology, material engineering, and medicine which are connected closely. This industry has been already known to a higher value-added business, and as going into an aging society, is expected a market growth. Also, it is a knowledge based component industry and each components assembled into product is almost all import items. This characteristics made many small and medium and venture enterprises participate in this area. For these reasons, it is needed a government's promotion. In this study, commercialization environment was analyzed and then commercialization items and strategies was figured out. Firstly, three factors for need, environment, technology were analyzed and then growth drivers growth restraints were provided. Secondly, items and strategies for commercialization were analyzed based on needs and trends of technology. Commercialization opportunities are expected to be created based on strategies following as; building a integrated technology development system, making a public opinion, strengthening a marketing, entering into niche market, B2B strategies etc.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.1
• /
• pp.1-18
• /
• 2008

We present a detailed period analysis for the F-type primary of ${\in}$ Aurigae by means of Fourier and wavelet algorithm. After collecting all available data which have been observed for around 160 years (1842 - 2006) from various international databases and published references we selected only data obtained during outside eclipse among them again. As a result of analysis using CLEANest and WWZ(weighted wavelet Z-transform) several frequencies including two clear periods ($67^d\;and\;123^d$) were found. In contrast to previous results that the periods vary irregularly it seems that the primary of ${\in}$ Aurigae is double mode or multiperiodic pulsator. The presence of the two periods and their ratio indicates that the high-mass interpretation of the variable could be valid. Also better understanding of the mechanisms driving the light variability of F-type supergiant stars requires continual series of photometric and radial velocity measurements in outside eclipse of this star.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5176-5183
• /
• 2013

In general, Korean Lightweight Concrete used Heat insulating material for building and filler for civil construction, backfill material for tunnel, office floor fillers, lightweight blocks and so on. These expand the range of use ALC(autoclaved lightweight concrete) on the soft-ground at regular intervals during road construction by installing piles used as substrates for the process is under study. In this study, behavior characteristics on the soft-ground of pavement analysis was used to test the geo-Centrifuge. Prototype pavement reduced to 1/30 slab form of the composition as kaolinite model tests were conducted in the soft ground. Pile Arrangement (having 36 component pile with an array of $3{\times}12$) was used to group of piles. Tests of gravity 30 level the centrifugal force acting Light-weight pavement models. Based on the Prototype pavement of the behavior characteristics of pavement behavior characteristics were estimated. FMA analysis of the 10 times as big 39.4kg (actual load 35 ton) of the lateral load is applied to the case 7.8mm (actual behavior 23.4mm) behavior was fine.