• Journal of the Korean Institute of Educational Facilities
• /
• v.16 no.5
• /
• pp.27-33
• /
• 2009

The existing universities enlarged the scope, filled up the facilities. And many new universities are founded by increase of university students, the change of curriculum and extension of installations for new curriculum. However, the planning for university campus hinders desirable activities in campus and also the origin function of university, because of the problems caused by an application of a uniform planning standard that lacks in logical analysis and such a short step as the occasion demands for the growth and the change of the university campus changing more rapidly than any other field in society. This dissertation is for space program beginning from architectural explanation and basic planning concluding a general structure-planning for land utility, circulation planning, and building layout planning in order to find the practical solution for the applicable campus plan. The contents of this dissertation is summarized below. First, I studied the characteristics of the university, the structure of the university facilities and the expansion the development process of the campus. Second, through the case study of domestic campus planning, I analyzed the characteristics and the problems about space programming, facility layout planning, circulation planning and exterior space planning. Third, in the basis of the above analyses, I set up the directions of comprehensive campus master plan.

• KIEAE Journal
• /
• v.13 no.2
• /
• pp.131-139
• /
• 2013

The aim of this dissertation is establishing internal indicator list for achieving policy goal of Carbon Neutrality Green City. First of all, it started to construct the basic system of planning indicator based on through comprehension of current studies such as advanced researches, government guidelines and green building certifications. And then it was set up final indicator list through inspecting FGI (Focus Group Interview), Verification of suitability, and Analysis of importance). As a result of this research, the planning indicator divided three steps and there were classified four fields in the top-level; Green Land and Ecology, Green Energy, Green Resource and Transportation, Green Living and Institution. According to the data, it deducted four items (ratio of green land, site plan, heat island and management of climate, base of nature ecology) and twelve index in the field of green land and ecology, three item(energy conservation and self-supporting, energy efficiency, new regeneration energy) and twelve index in the field of green energy and regeneration, five items(water resources utilize and circulation, other resource reduction and circulation, public transportation, green transportation plan) and fifteen index. Totally, Planning Indicators of forty nine were deducted. Therefore, there was the result of importance analysis that the indicators of plan and maintain management as the side of space for carbon neutrality were more appreciated than carbon reduction of individual building.

• Journal of architectural history
• /
• v.8 no.1 s.18
• /
• pp.41-52
• /
• 1999

This study aims to infer the plan and location of the government office building in Chongju Castle in the Late Yi-dynasty. The conclusion is as follows: 1. The Chongju Castle Map(淸州邑城圖, late in the 18th century, hereinafter referred to CCM) provides the detail arrangement and location of Government Office Building in Chongju Castle. And the road structure and plan of the CCM is almost same with the present time. 2. As compared with CCM and a Chongju-land Registration Map(淸州面地籍原圖, 1913, CRM) to infer the location of the traditional government office building in Chongju Castle, the building locations of Gaek-Sa(客舍) Donghun(東軒)'s region in CCM are almost accordance with today's. But those of Byungyoung(兵營) Group's region are represented by a little error. So the locations of Byungyoung(兵營) Group's region rearranged, moved down to be in accordance with the approach circulation of Main Gate(閉門樓) which is shown in CRM. 3. The records, on the plan of the traditional government office building in Chongju Castle, have proved that the plan of Gaek-Sa was a width of 11 bay and a depth of 2 bay. A width of 3 bay drawn in CCM, the present plan of Donghun is a width of 7 bay and a depth of 4 bay. The main building and especially the double-storied Main Gate($4{\times}3$) of Byungyoung Group are exactly in keeping with the present road structure.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.2
• /
• pp.108-123
• /
• 2018

This paper focuses on the relationship between center and periphery by discussing the circulation of rare resources, such as bronze, stamped hard pottery, and proto-porcelain. The discussion includes two parts: the internal Shang culture region and the region outside of Shang. Within the Shang culture region, all the resources mentioned above were brought from different places to the Panlongcheng site and then transferred to Zhengzhou Shang city. On the other hand, they also produced and consumed the resources in a special way, which indicates a certain degree of independence. Outside the Shang region, bronze products and maybe even raw copper resources were circulated from Zhengzhou Shang city to the Chengyang site, while stamped hard pottery and proto-porcelain were transferred to Zhengzhou through the Panlongcheng site. Resource circulation was bi-directional. Thus, this resource circulation was one of the key factors to building the relationship between center and periphery.

• Journal of Environmental Science International
• /
• v.18 no.9
• /
• pp.941-952
• /
• 2009

The urban microscale wind field around the air quality monitoring station was investigated in order to check how a building complex influences it. For this study as the high density areas Jwa-dong and Yeonsan-dong monitoring sites in Busan were chosen. As the direction of inflow which is perpendicular to the building of the monitoring station was expected to cause the considerable variation of the wind field, that direction was selected. The model Envi-met was used as the diagnostic numerical model for this study. It is suitable for this investigation because Envi-met has the microscale resolution. After simulating it, on the leeward side around a building complex the decrease of flow velocity and some of vortexes or circulation area were discovered. In addition, on the edge of the top at the building and at the back of the building the upward flow was developed. If the sampling hole of monitoring site were located in this upward flow, it would be under the influence of upward flow from the near street.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.3
• /
• pp.240-249
• /
• 2009

HRSG(Heat Recovery Steam Generator) building is large enclosed structure included various heat sources. This building needs to appropriately keep internal air temperature for worker's safety and operability of control devices. In this study, ventilation analysis is performed to find proper ventilation method for temperature control. Ventilation analysis is applied to entire internal space of the building with standard $k-{\varepsilon}$ model and enhanced wall treatment because of large size of the structure. And the ventilation method is considered natural and forced convection with two louver structures which has damper or not. Louver structure affect directly air circulation in near HRSG and lower region of the building. Forced ventilation provides strong inertial force which cause upward airflow. From the analysis, it is found that design requirement for internal air temperature can be satisfied by forced ventilation method with louver structure without damper.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.4
• /
• pp.533-542
• /
• 2010

For a long times it has been believed that the Magnus effect of the rotating cylinder could be utilized for the lifting devices applicable to marine practices. It has been reported that the rotating cylinder installed on upper deck of commercial vessel could play a energy saving role however the idea might be applicable in a very rare case in ship building practices. In this study special high lift rudder system equipped with the trailing edge rotor has been suggested in correspondence with the increasing requirement of greater rudder force. Through the numerical simulation it is cleared that the trailing edge rotor could play a role in enhancement of circulation and refinement of boundary layer of the rudder system. At the same time it is found out that the lift force of the rudder system without rotation of trailing edge rotor could be doubled when the circumferential velocity of the trailing edge rotor is equal to twice of the inflow velocity.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.2
• /
• pp.95-106
• /
• 2018

This study aimed at revaluating Frank Gehry's freeform constructions. To this end, the study analyzed the way the space composition and circulation system of general constructions are connected with newly extended parts in the Art Gallery of Ontario and, based on this, comparatively analyzed freeform constructions before and after the art gallery, finding out what changes were made in the exterior and interior spaces of freeform constructions built after the art gallery. The results of the study are as follows. First, starting from extending the Art Gallery of Ontario, Gehry came to use glass instead of metal as main material of freeform constructions. In order to create the circulation connecting the existing building and the extended mass, Gehry applied continuing circulation for the first time to the gallery. Third, in addition to design motives, such as the woodblock print depicting a carp by Hiroshige, still life depicting a glass bottle by Morandi and the crease of the shawl in Vermeer's paintings, which Gehry applied to freeform constructions, the design motif which was recently acquired from Pyrenees rock was added. Fourth, the trend of mall construction appeared before and after the Art Gallery of Ontario. Finally, Gary used the shape of fish as a design motif for his work at an important turning point in his Freeform Architecture.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.286-290
• /
• 2009

Generally the window of the building is an objective of mining and having a distant view and also for a circulation it will can open and shut because becomes the structure insulation, the meat detailed drawing it does a very difficult portion, it is. To reduce the loss of the energy which leads, to an air conditioning energy and an expense increase problem the color which the interior furniture and the clothing due to the augmentation and the corpse ultraviolet rays of the unpleasant feeling which is caused by with the transient one solar energy influx which leads the window will burn, it joins in the window and it confronts and the novel solution is demanded.

• Korean Institute of Interior Design Journal
• /
• no.41
• /
• pp.236-245
• /
• 2003

Environment friendly architecture, which will reduce shortcomings of current architectural culture, can be achieved by using natural energy and environment friendly building materials together with their environmental architecture techniques. Particularly, even though the overall building system is perfect, it cannot be considered as comfortable architectural space if the materials are polluted, harmful to human bodies and producing wastes. Therefore, in order to build environment friendly architecture, the selection of the materials is very important and necessary from the planning stage with careful reviews and concern. This study tries to define what the environment friendly materials we, to investigate and to classify them, in order to provide some guidelines for selecting them at plans to build. For examples, the materials can be classified into natural materials, continuously usable materials, recycled materials from wastes, and less polluting materials mixed with natural materials. Finally, this study reviews the existing products in the market and proposes to develop new ones in the future. It will present the circulation of resources in the 21century through recycled and reused materials.