• Journal of Internet of Things and Convergence
• /
• v.8 no.4
• /
• pp.9-15
• /
• 2022

NAND flash memory is used as a medium for various storage devices due to its high data processing speed with low power consumption. However, since the read processing speed of data is about 10 times faster than the write processing speed, various studies are being conducted to improve the speed difference. In particular, flash dedicated buffer management policies have been studied to improve write speed. However, SSD(solid state disks), which has recently been used for various purposes, is more vulnerable to read performance than write performance. In this paper, we find out why read performance is slower than write performance in SSD composed of NAND flash memory and study buffer management policies to improve it. The buffer management policy proposed in this paper proposes a method of improving the speed of a flash-based storage device by analyzing the pattern of read data and applying a policy of pre-reading data to be requested in the future from NAND flash memory. It also proves the effectiveness of the read-ahead policy through simulation.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.331-337
• /
• 2009

Container crane is main equipment in container terminals and it determines the productivity and the efficiency of container terminals. The typical type of container cranes has the single trolley and one among advanced types of them has the dual trolley. The objective of this paper is to analyze the buffer size of a container crane with the dual trolley in container terminals. We present a simulation model for analysing the buffer space of a container crane with the dual trolley. The buffer space is located between main trolley in sea-side and second trolley in yard-side. We performs various simulation experiments and analyze the buffer size to estimate the required productivity.

• The KIPS Transactions:PartA
• /
• v.18A no.4
• /
• pp.135-142
• /
• 2011

This research is to design an effective buffer structure and its management for flash memory based high performance SSDs (Solid State Disks). Specifically conventional SSDs tend to show asymmetrical performance in read and /write operations, in addition to a limited number of erase operations. To minimize the number of erase operations and write latency, the degree of interleaving levels over multiple flash memory chips should be maximized. Thus, to increase the interleaving effect, an effective buffer structure is proposed for the SSD with a hybrid address mapping scheme and super-block management. The proposed buffer operation is designed to provide performance improvement and enhanced flash memory life cycle. Also its management is based on a new selection scheme to determine random and sequential accesses, depending on execution characteristics, and a method to enhance the size of sequential access unit by aggressive merging. Experiments show that a newly developed mapping table under the MBA is more efficient than the basic simple management in terms of maintenance and performance. The overall performance is increased by around 35% in comparison with the basic simple management.

• Land and Housing Review
• /
• v.10 no.4
• /
• pp.41-50
• /
• 2019

This study was started to study the buffer zone of Daejeon metropolitan city in order to study the policy and environment for the suitability evaluation of the use of green buffer zone. The target of the study was selected as the buffer zone of western buffer, which is frequently used in the Daejeon Metropolitan City, and a preliminary index was selected to evaluate the suitability of the green buffer zone. AHP analysis was conducted to increase the reliability of the preliminary indicators and the weight was analyzed by questionnaires to experts and practitioners. In addition, based on the existing statistical data, we rebuilt the green buffer zone and investigated the current condition, and compared and analyzed the green buffer zone and the places where they did not. The results are as follow. First, unlike the statute interpretation that construction can not be done in buffered green spaces, green buffer zones have been utilized in various ways. However, the lack of advanced citizen consciousness of the residents, the responsibility of the responsible person, and the problem of the management office alone are causing problems. Second, according to the results of AHP questionnaire analysis, functional and stability among the appropriateness indexes of green buffer zone utilization were evaluated highly. Park accessibility and utilization potential also weighed somewhat, and it was judged that the epochal trend was more important in the use of green buffer zones. Third, analysis of the status of Western green buffer zones in Daejeon showed that the utilization rate was more than half. This suggests the necessity of judging the appropriateness of the application of the green buffer zone effectively due to the change of the perception of the green buffer zone of the residents. Fourth, as a result of comparing and analyzing the site where the site is used and the site where it is not, it is found that it is used within a range that does not greatly affect each index. However, as the stability has decreased, we have decided that the utilization method is most damaging to the green zone, and we should strive to improve the stability in future. Finally, the analysis of a red clay road and a red clay road sites decreased from Class I of stability to Grade II. However, the fall figure showed a difference between the 13 % drop rate of the target location and the 5% decline rate of utilization. The difference was analyzed as the difference of width of a red clay road. This can be regarded as one of the ways of damaging the green zone to the minimum extent, which is a great advantage in selecting the future utilization plan.

• The KIPS Transactions:PartC
• /
• v.10C no.5
• /
• pp.595-602
• /
• 2003

In this paper, we proposed new buffer management and cell scheduling scheme of GFR service for improving fairness of TCP/IP traffic in ATM networks. The proposed algorithm used untagged cell, which came to ATM switch, to decide the policy for discard of frame and what kind of VC cell it would serve. Performance analysis through the simulation present that proposed scheme can meet fairness 2 (MCR Plus equal share), which are not met by conventional scheduling mechanism such as WRR. Also, proposed scheme is superior to WRR about 30% in throughput and more efficiency in fairness criteria.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.7
• /
• pp.22-29
• /
• 2002

The Gauranteed Frame Rate service category was proposed by the ATM Forum as an enhancement to the UBR service. This service aims to support minimum cell rate gaurantee for each virtual connection and allow any excess bandwidth in the network to be shared among the contending VCs in a fair manner. We propose a new buffer management algorithm for GFR service through FIFO queuing discipline. Proposed scheme can provide minimum bandwidth guarantee for GFR VCs as well as improve the fairness among the competing GFR VCs on a single FIFO queue. From simulation results, we demonstrate the proposed scheme fulfills the requirement of GFR service as well as improves the TCP throughput.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1123-1140
• /
• 2019

Many Internet of Things (IoT) applications involving bursty traffic have emerged recently with event detection. A power management scheme qualified for uplink bursty traffic (PM-UBT) is proposed by distinguishing between bursty and general uplink traffic patterns in the IEEE 802.11 standard to balance energy consumption and uplink latency, especially for stations with limited power and constrained buffer size. The proposed PM-UBT allows a station to transmit an uplink bursty frame immediately regardless of the state. Only when the sleep timer expires can the station send uplink general traffic and receive all downlink frames from the access point. The optimization problem (OP) for PM-UBT is power consumption minimization under a constrained buffer size at the station. This OP can be solved effectively by the bisection method, which demonstrates a performance similar to that of exhaustive search but with less computational complexity. Simulation results show that when the frame arrival rate in a station is between 5 and 100 frame/second, PM-UBT can save approximately 5 mW to 30 mW of power compared with an existing power management scheme. Therefore, the proposed power management strategy can be used efficiently for delay-intolerant uplink traffic in event-driven IoT applications, such as health status monitoring and environmental surveillance.

• Tunnel and Underground Space
• /
• v.34 no.2
• /
• pp.104-126
• /
• 2024

Buffer and backfill play an essential role in isolating high-level radioactive waste and retard the migration of leaked radionuclides in deep geological disposal system. A bentonite mixture, which exhibits a swelling property, is considered for buffer and backfill materials, and excessive groundwater inflow from surrounding rock mass may affect stability and efficiency of their role as an engineered barrier. Therefore, stringent quality control as well as in-situ installation management and inflow water constrol for buffer and backfill are required to ensure the safety of deep disposal facilities. In this study, we analyzed the design requirements of buffer and backfill by examining various laboratory tests and a field study of the Steel Tunnel Test at the Äspö Hard Rock Laboratory in Sweden. We introduced how to control the quality of buffer and backfill construction in-field, and also presented how to handle excessive groundwater inflow into disposal caverns, validating the groundwater retention capacity of bentonite pellets and the effectiveness of geotexile use.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.179-186
• /
• 2006

There was a lot of research to integration of the transshipment and inventory problem in supply chain. Such a integration of inventory and transshipment problem called IRP (Inventory Routing Problem). We consider a distribution problem in which a set of products has to be shipped from a supplier to several retailers in a given planning horizon. Transshipment from the supplier to the retailer is performed by vehicles of limited capacity. Each retailer determines replenishment leadtime and order quantity with buffer management. A supplier determines optimal vehicle routing in supply chain. We suggest a heuristic algorithm which be used TOC buffer management in a replenishment problem and a tabu search algorithm in VRP (Vehicle Routing Problem).

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.6 s.22
• /
• pp.72-79
• /
• 2004

Critical Path-based project management has been applied to the construction projects with a goal of delivering projects within original costs and time estimates. These current project management methods, rarely make early finishes of construction Projects. In addition, current practices on time management seems not to take advantages of early finishes concepts due to student syndrome and Parkinson's Law, This research study applied the Theory of Constraints(n) in the estimation of construction project duration. While the TOC includes variety of management techniques, in this study, it refers to critical chain that has been used to develop the specific management technique in scheduling. The concept of critical chain is applied to this study to solve the problems associated with the current scheduling method. The efforts focus to solve the p개blems associated with current construction project scheduling methods by adopting both stochastic estimation technique and the concept of schedule buffer,