• 제목/요약/키워드: Buffer capacity

검색결과 362건 처리시간 0.028초

THE RELATIONSHIP BETWEEN BUFFER INDEX CURVE AND FERMENTATION QUALITY OF SILAGE

  • Kim, K.H;Uchida, S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제4권1호
    • /
    • pp.67-71
    • /
    • 1991
  • The purpose of this study was to investigate the possibility of using the buffer index curve as a criterion of silage quality evaluation. The buffer index (or buffer capacity, $\beta$) value is the amount of 0.1N NaOH consumed in titrating from the beginning to the end of the chosen pH step. This value equals the slope of the titration curve at the chosen pH range (${\beta}={\Delta}NaOH/{\Delta}pH$). There were two patterns of buffer index curve. Poorly preserved silages had a peak at pH 5.0, whereas with well preserved silages the peaks tended to rise to the pH 3.75 or 4.00. Well preserved, wilted silages with high pH also appeared to have peak values at pH 3.75 or 4.00. There was a high positive correlationship between the concentration of lactic acid and peak value of good quality silage (r = 0.994, p < 0.01). Also a high positive correlationship (r = 0.899, p < 0.001) was found between the sums of concentration of acetic and butyric acids and the peak values of poor quality silages. The results of these experiments verified the value of the buffer index method as a criterion of silage quality evaluation.

Analyzing the Impact of Buffer Capacity on Crosspoint-Queued Switch Performance

  • Chen, Guo;Zhao, Youjian;Pei, Dan;Sun, Yongqian
    • Journal of Communications and Networks
    • /
    • 제18권3호
    • /
    • pp.523-530
    • /
    • 2016
  • We use both theoretical analysis and simulations to study the impact of crosspoint-queued (CQ) buffer size on CQ switch throughput and delay performance under different traffic models, input loads, and scheduling algorithms. In this paper, we present the following. 1) We prove the stability of CQ switch using any work-conserving scheduling algorithm. 2) We present an exact closed-form formula for the CQ switch throughput and a non-closed-form but convergent formula for its delay using static non-work-conserving random scheduling algorithms with any given buffer size under independent Bernoulli traffic. 3) We show that the above results can serve as a conservative guide on deciding the required buffer size in pure CQ switches using work-conserving algorithms such as the random scheduling, under independent Bernoulli traffic. 4) Furthermore, our simulation results under real-trace traffic show that simple round-robin and random work-conserving algorithms can achieve quite good throughput and delay performance with a feasible crosspoint buffer size. Our work reveals the impact of buffer size on the CQ switch performance and provides a theoretical guide on designing the buffer size in pure CQ switch, which is an important step toward building ultra-high-speed switch fabrics.

온도 변화를 고려한 압축 벤토나이트 완충재의 수분흡입력 평가 (Evaluation of Water Suction for the Compacted Bentonite Buffer Considering Temperature Variation)

  • 윤석;고규현;이재완;김건영
    • 한국지반공학회논문집
    • /
    • 제35권11호
    • /
    • pp.7-14
    • /
    • 2019
  • 압축 벤토나이트는 고준위폐기물을 처분하기 위한 공학적방벽 시스템에서 중요한 구성요소 중 하나인 완충재의 후보물질로 가장 적합한 것으로 고려되고 있다. 완충재는 처분공 내 사용후핵연료가 담긴 처분용기와 근계 암반 사이에 채워지는 방벽재로서 지하수 유입으로부터 처분용기를 보호하고, 방사성 핵종 유출을 저지한다. 처분 초기에는 처분용기로부터 발생하는 고온의 열량으로 인해 완충재의 포화도는 감소하지만, 그 후 주변 암반으로부터 유입되는 지하수로 인해 완충재의 포화도는 증가한다. 이렇듯 완충재는 처분 운영 조건에 따라 불포화에서 포화 상태로 도달하게 되기에 완충재의 불포화-포화 거동 특성은 공학적방벽의 전체 안전성을 좌우할 수 있는 중요한 입력자료이다. 따라서 본 연구에서는 국내 압축 벤토나이트 완충재에 대한 수분보유특성을 규명하고자 하였다. 처분 초기 온도 증가에 따라 완충재의 포화도가 감소하는 상황을 고려하여 상온에서부터 125도까지 압축 벤토나이트의 온도 증가에 따른 체적 함수비와 수분흡입력을 측정하였다. 또한 이를 상온에서 동일한 함수비에서의 수분보유능과 비교하였으며 상온에서의 수분흡입력은 1~15% 정도 크게 측정되었다.

소용량 및 대용량의 ATM시스템에 적합한 스위칭 망의 구성 방안 (Construction Methods of Switching Network for a Small and a Large Capacity AMT Switching System)

  • 양충렬;김진태
    • 한국정보처리학회논문지
    • /
    • 제3권4호
    • /
    • pp.947-960
    • /
    • 1996
  • 우수한 성능의 ATM 스위칭 시스템 개발을 위한 주요 목표가 셀 손실, 셀지연 및 처리율의 저하를 최소화하는데 있으며, 이러한 목적에 가장 적합한 ATM스위치 소자가 램덤 액세스 메모리 및 제어 논리에 의해 수행되는 공유 버퍼 메모리 스위치(shared buffer memory switch)이다. 이 스위치는 입력 포트의 수가 증가할 수록 VLSI의 제조가 어렵기 때문에 최근의 소용량 및 대용량의 ATM 스위치는 8$\times$8,600 b/s 또는 16$\times$16,150 Mb/s의 단위 스위치를 사용하여 32$\times$32(4.9 Gb/s), 150Mb/s의 스위치를 구현하는 스위치 모듈 방법을 사용하고 있다. 본 논문에서는 단위 공유 버퍼 메모리 스위치의 버퍼 공유에가 위한 전체 메모리 감소 효과를 만족하는 버퍼 용량을 해석적 으로 평가하고, 트래픽 조건에 따른 셀 손실율을 컴퓨터 시뮬레이션한 결과를 제시 하며 또한, 스위치 모듈 방법을 이용하는 소용량 및 대용량 ATM 스위치 마의 특징을 분석,이 결과를 바탕으로 현재 각국에서 연구중인 32$\times$32, 150Mb/s의 스위치 구조를 제시하며, 궁극적으로 위 주요 목표들을 만족하는 소용량 및 대용량의 ATM 스위칭 시 스템을 위한 고속 스위칭 망 구조를 제시한다.

  • PDF

Optimal buffer partition for provisioning QoS of wireless network

  • Phuong Nguyen Cao;Dung Le Xuan;Quan Tran Hong
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
    • /
    • pp.57-60
    • /
    • 2004
  • Next generation wireless network is evolving toward IP-based network that can various provide multimedia services. A challenge in wireless mobile Internet is support of quality of service over wireless access networks. DiffServ architecture is proposed for evolving wireless mobile Internet. In this paper we propose an algorithm for optimal buffer partitioning which requires the minimal channel capacity to satisfy the QoS requirements of input traffic. We used a partitioned buffer with size B to serve a layered traffic at each DiffServ router. We consider a traffic model with a single source generates traffic having J $(J\geq2)$ quality of service (QoS) classes. QoS in this case is described by loss probability $\varepsilon_j$. for QoS class j. Traffic is admitted or rejected based on the buffer occupancy and its service class. Traffic is generated by heterogeneous Markov-modulated fluid source (MMFS).

  • PDF

자원제약조건을 갖는 연속흐름라인에서 Buffer 의 할당에 관한 연구 (The Buffer Allocation with Linear Resource Constraints in a Continuous Flow Line)

  • 성덕현;장수영;홍유신
    • 대한산업공학회지
    • /
    • 제21권4호
    • /
    • pp.541-553
    • /
    • 1995
  • An efficient algorithm is proposed for a buffer allocation in a continuous flow line. The problem is formulated as a non-linear programming with linear constraints. The concept of pseudo gradient and gradient projection is employed in developing the algorithm. Numerical experiments show that the algorithm gives the actual optimal solutions to the problems with single linear constraint limiting the total buffer capacity. Also, even in longer production lines, it gives quite good solutions to the problems with the general linear resource constraints within a few seconds.

  • PDF

In Vitro Anticholinesterase 스크리닝을 위한 집파리 및 3종 곤충으로부터의 Acetylcholinesterase의 추출 (Extraction of Acetylcholinestrase from the Housefly and Three Other Insect Species for In Vitro Anticholinesterase Screening)

  • 이시혁;이준호;조광연
    • 한국응용곤충학회지
    • /
    • 제30권1호
    • /
    • pp.18-28
    • /
    • 1991
  • 집파리(Musca domestica L.)외 3종 곤충으로부터 0.01 M sodium phosphate buffer를 이용하여 AChE를 분리, 추출할 때 AChE의 안정성 및 buffer capacity를 고려한 적정 pH는 7.5였으며, 0.1M sidium phosphate buffer의 기질 수용액으로 AChE의 활성을 측정할 경우 효소의 활성화와 buffer capacity를 고려했을 때 pH는 7.5가 적합한 조건이었다. AChE 분리.추출을 위한 조직의 마쇄시에는 Potter Elvehjem homogenizer를 사용하였으며, 마쇄액을 원심분리하여 AChE현탁액을 조제할 때 집파리의 경우에는 성충 두부700g 상등액을, 벼멸구(Nilaparvata lugens Stal)는 5령 약충 전충체의 700g 상등액을, 배추좀나방 (Plutella xylostella L.)의 경우에는 5령 유충 전충체의 지질을 제거한 10,000g 상등액을, 그리고 담배거세미나방(Spodoptera litura F.)의 경우에는 4령 유충.두부의 700g 상등액을 AChE 0.2~0.5U 정도로 조정하여 효소원으로 사용하는 것이 대량조제, 추출수율 및 활성 측정상의 안정성등을 고려할 때 합리적인 것으로 조사되었다. 4종 곤충의 AChE현탁액을 $-18^{\circ}C$ 조건에서 냉동보관할 경우 3주까지는 90% 이상의 활성이 유지되었다. 집파리, 벼멸구 및 배추좀나방 AChE의 Km 값은 각각 0.042, 0.037 및 0.043 mM이었으며, 고농도에서 AChE 특이적 기질 저해 현상이 관찰되었으나 담배거세미나방 ChE의 경우에는 1.15 mM의 Km값을 가지며 BuChE적 특성을 보이는 듯 하나 추가실험이 요구된다. 각 곤충의 AChE를 대상으로 한 저해실험시의 적정 기질농도는 집파리, 벼멸구, 배추좀나방의 경우에는 공히 0.5 mM 그리고 담배거세미나방의 경우는 12 mM 이었다.

  • PDF

예산과 공간 제약하에서 크랭크샤프트 생산라인의 생산능력 증대를 위한 시뮬레이션 기반의 연구 (A Simulation Based Study on Increasing Production Capacity in a Crankshaft Line Considering Limited Budget and Space)

  • 왕관;송수;신양우;문덕희
    • 대한산업공학회지
    • /
    • 제40권5호
    • /
    • pp.481-491
    • /
    • 2014
  • In this paper, we discussed a problem for improving the throughput of a crankshaft manufacturing line in an automotive factory in which the budget for purchasing new machines and installing additional buffers is limited. We also considered the constraint of available space for both of machine and buffer. Although this problem seems like a kind of buffer allocation problem, it is different from buffer allocation problem because additional machines are also considered. Thus, it is not easy to calculate the throughput by mathematical model, and therefore simulation model was developed using $ARENA^{(R)}$ for estimating throughput. To determine the investment plan, a modified Arrow Assignment Rule under some constraints was suggested and it was applied to the real case.

가변형 파이프라인방식 메모리를 내장한 공유버퍼 ATM 스위치의 구현 (Implementation of a Shared Buffer ATM Switch Embedded Scalable Pipelined Buffer Memory)

  • 정갑중
    • 한국정보통신학회논문지
    • /
    • 제6권5호
    • /
    • pp.703-717
    • /
    • 2002
  • 본 논문은 가변형 공유 버퍼 ATM 스위치의 구조 및 VLSI 구현에 관한 연구이다. 본 논문에서 설계한 단일 칩 공유 버퍼 ATM 스위치는 4ns접근속도의 가변형 파이프라인 방식 공유 버퍼를 내장하고 기존의 공유 버퍼 ATM 스위치들이 가지는 메모리 사이클 시간 제한을 해결한다. 내장 버퍼의 가변성을 이용하여 유연한 스위칭 성능을 지원하고 버퍼 메모리 제어와 주소 큐 제어의 독립성을 이용하여 포트 사이즈의 가변성을 제공한다. 제안된 ATM 스위치는 스위치 사이즈와 버퍼 사이즈의 가변성을 이용하여 복잡한 회로의 재설계 없이 용량 및 성능을 재구성할 수 있다. 0.6um CMOS 기술의 설계된 칩은 동작 주파수 800MHz, 640Mbps/port, 4 ${\times}$ 4 Switch Size를 지원한다.

An Artificial Neural Network for Biomass Estimation from Automatic pH Control Signal

  • Hur, Won;Chung, Yoon-Keun
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제11권4호
    • /
    • pp.351-356
    • /
    • 2006
  • This study developed an artificial neural network (ANN) to estimate the growth of microorganisms during a fermentation process. The ANN relies solely on the cumulative consumption of alkali and the buffer capacity, which were measured on-line from the on/off control signal and pH values through automatic pH control. The two input variables were monitored on-line from a series of different batch cultivations and used to train the ANN to estimate biomass. The ANN was refined by optimizing the network structure and by adopting various algorithms for its training. The software estimator successfully generated growth profiles that showed good agreement with the measured biomass of separate batch cultures carried out between at 25 and $35^{\circ}C$.