• 한국전자통신학회논문지
• /
• 제15권6호
• /
• pp.1045-1054
• /
• 2020

본 논문에서는 불안정한 네트워크 환경에서 안정적으로 대용량 데이터 스트림을 전송할 수 있는 TCP/IP 기반 링 버퍼 시스템을 설계하였다. 우리가 제안한 방식에서 각 전파천문대의 백엔드 시스템으로부터 UDP 프레임으로 생성 및 출력되는 관측 데이터 스트림은 클라이언트 시스템 내의 소켓 버퍼를 경유해 대용량 링 버퍼에 UDP 패킷으로 저장된다. 이후 목적지에 해당하는 상관센터로의 안정적인 전송을 위해 해당 패킷은 TCP로 전송되고 상관센터 내의 서버 시스템은 소켓 버퍼에 수신된 패킷에 이상이 없으면 대용량 링 버퍼에 저장한다. 패킷 손실, 중복 및 순서 역전 등의 이상이 발생할 경우 TCP의 흐름 제어를 통해 패킷은 재전송되며 상관센터에 도착한 데이터는 신뢰성을 보장받게 된다. 또한 네트워크 성능 불안정으로 인한 혼잡 회피 발생 시 병렬 스트림 적용을 통해 성능 저하가 최소화될 수 있도록 하였다.

• 대한산업공학회지
• /
• 제25권3호
• /
• pp.404-410
• /
• 1999

A scheme of more exact overflow probability analysis is proposed for traffic regulated by dual leaky bucket. To each regulated traffic stream is allocated bandwidth and buffer independent of other traffic stream and overflow occurs when total bandwidth or buffer allocated to each traffic exceed link capacity or physical buffer size. Ratio of buffer and bandwidth allocated to each traffic stream is assumed to be constant, and this ratio is larger than the ratio of physical buffer and bandwidth due to buffer sharing effect. Numerical experiments show that this sharing effect have significant influence on overflow probability and effective bandwidth.

• 한국시뮬레이션학회논문지
• /
• 제7권2호
• /
• pp.45-62
• /
• 1998

This research is concerned with buffer management in a multi-cell FMS with an AGVS. Buffers in manufacturing systems are required to reduce blocking and starving caused by breakdowns, variability in process times, and diversity of part routing. Due to the high per unit buffer cost, which primarily consists of floor space and equipment costs, the total capacity of buffers in and FMS is very limited. Proper buffer management can provide a high system efficiency. This paper presents a buffer management model for a multi-cell FMS with an AGVS and a simulation study to compare the proposed model to a conventional buffer management model in a job shop FMS.

• 한국통신학회논문지
• /
• 제27권10C호
• /
• pp.945-950
• /
• 2002

본 논문에서는 유선 및 무선환경에 상관없이 ATM(Asynchronous Transfer Mode) 접속망의 주요구성 요소인 ATM 접속노드의 셀 손실율, 버퍼용량 및 지연시간간의 상관관계를 제시함으로서 ATM접속망 설계를 위한 기본적인 기술적 사항을 분석하였다. 이를위해 ATM 접속노드의 트래픽 성능평가를 위한 트래픽 모델을 ATM cell-scale queueing, burst-scale queueing 레벨로 구분하여 설명하였고 CBR(Constant Bit Rate), 랜덤 및 VBR(Variable Bit Rate) 트래픽 형태별 모델적용을 검토하였다. 결국 유선 또는 무선방식으로 ATM 서비스를 제공하기 위한 ATM접속노드 설계시 서비스별 QoS(Quality of Service)를 만족시키기 위한 셀 손실율, 버퍼용량 및 지연시간간의 상관관계를 정량적으로 분석하였다.

• 한국조리학회지
• /
• 제13권2호
• /
• pp.254-259
• /
• 2007

최소가공 감자의 갈변을 억제하기 위해 감자를 박피 절단하여 다양한 농도의 citrate buffer와 phosphate buffer로 각각 처리한 후 저밀도 폴리에틸렌 포장지로 밀봉하여 $5^{\circ}C$와 $20^{\circ}C$에 저장하면서 실험에 사용하였다. 최소가공 처리 된 감자를 24시간 저장 후 색도 변화를 측정한 후 ${\Delta}L$값과 ${\Delta}E$ 값을 계산하여 갈변 효과를 조사한 결과, citrate buffer 처리구가 phosphate buffer 처리구에 비하여 전반적으로 우수한 갈변억제 효과를 나타내었으며, 동일 buffer에서 pH가 낮을수록 우수한 효과를 나타내었다. Citrate buffer, pH 3.0에 처리 후 $5^{\circ}C$에 저장한 조건이 대조구에 비하여 약 35배 이상의 효과를 나타내어 가장 우수한 갈변억제능을 나타내었다. 농도별 처리에서는 citrate buffer(pH 3.0)에서 전반적으로 우수한 갈변억제 효과를 나타내고 있었으나, 0.5 M의 농도에서는 phosphate buffer(pH 5.0) 처리구가 더욱 우수한 갈변억제 효과를 나타내었다.

• 한국통신학회논문지
• /
• 제25권4B호
• /
• pp.692-699
• /
• 2000

We build and analyze some types of queueing model to discuss capacity dimensioning of access links of a LAN interworking unit connected to the Internet backbone network. We assume that the IWU has a FIFO buffer to transmit IP packets to the Internet through the backbone. In order to analyze the system, we use a Poisson process and an MMPP process as input traffic models of IP packets and we use a general service time distribution as a service time model. But we use both an exponential service time and a deterministic service time in numerical examples for simple and efficient performance comparisons. As performance measures, we obtain the packet loss probability and the mean packet delay. We present some numerical results to show the effect of arrival rate, buffer size and link capacity on packet loss and mean delay.

• 한국물환경학회지
• /
• 제20권6호
• /
• pp.555-562
• /
• 2004

This paper presents the development and application of a riparian buffer zone design model(RBZDM). The model was developed as a decision-making tool for watershed management, by integrating geographic information system(GIS) and analytical hierarchy process(AHP) theory. Several factors for watershed management, such as pollution removal capacity, land aquisition cost, distribution of point and non-point pollution sources, and possibility of new pollution source location, were analyzed based on AHP theory. The vegetated buffer zone width was designed using GIS-based riparian buffer analysis. The developed model was applied to the Kyoungan Stream watershed, which is an important part of Paldang lake catchment area. The Kyoungan stream watershed was divided into sixteen subbasins. Six of them belong to the main stem, where the model was applied. Ten alternatives of buffer zone width and five hierarchial levels were designed. The relative importance and the relative preference were computed by pair-wise comparison of evaluation criteria given in hierarchial levels. The buffer zone width was determined by linear function of the given alternatives and relative preferences. From this study, it was determined that the six buffer zone widths of Kyoungan main stems would be 1,594, 1,744, 1,856, 1,782, 1,338, 1,780 meter, from upstream to downstream.

• Nuclear Engineering and Technology
• /
• 제31권1호
• /
• pp.116-132
• /
• 1999

This study is intended to analyze the requirements of a buffer material that is one of the major components of the engineered barriers in a high-level radioactive waste repository. The characteristics of potential materials for the buffer in the repository were analyzed and a candidate material was selected. And, based on the current knowledge and the information from various sources, the requirements of a buffer material were evaluated. Finally its quantitative functional criteria on the generic viewpoint has been recommended to be supplied as a guideline for the development of the reference disposal concept and the related buffer material in Korea. The criteria are composed of seven major items, such as hydraulic conductivity, retardation capacity, swelling potential and swelling pressure, thermal conductivity, longevity, organic matter content, and mechanical properties.

• Current Research on Agriculture and Life Sciences
• /
• 제27권
• /
• pp.69-75
• /
• 2009

This research regard it as most meaningful to realize the importance of the hedgerow in cultivated areas functioning as a residual landscape element in rural landscape and set improvement guidelines through landscape character and value analysis to cope with landscape malfunction. The results of summary are as follows. 1) First of all, as a result of landscape character analysis of edge stripe in cultivated land in total of 7 case areas, for example, the edge stripe in cultivated land in case area 4 and 8 maintain the width of 10m and are assessed satisfactory in terms of vegetation development condition, appearance of living species, connectivity, buffer capacity and so on. Also, as a result of structural character of correlation analysis among items, the correlation coefficient between width and appearance of living species showed 0.941, the highest. Following are connectivity and appearance of living species and width and buffer capacity respectively: 0.841 and 0.740. 2) As a result of landscape character analysis of uncultivated stripe in total of 6 case areas, it is analyzed that case area 4 maintains the widest width as almost 4.5m average width and considered valuable as I degree in vegetation development condition, filtering, and connectivity. 3) As a result of problem analysis of uncultivated stripe, for example, case 3, 9, and 10 was analyzed that the width was below 1.25m which is too small to carry out the function of buffer and habitat for living creature, so minimum standard width was set between 4~5m through comprehensive analysis of character of each case area. Based on the result above landscape character, value and problem analysis, main improvement guidelines are set in terms of width, connectivity, filtering, and vegetation development, restrictive practices and so on.

• 한국산림과학회지
• /
• 제79권4호
• /
• pp.376-387
• /
• 1990

대기오염(大氣汚染)과 산성우(酸性雨)가 삼림토양(森林土壤)의 완충능(緩衝能)에 미치는 영향(影響)을 규명하기 위하여 이동오염원지역(移動汚染源地域)으로 서울지역(地域), 고정오염원지역(固定汚染源地域)으로 울산(蔚山) 및 여천지역(麗川地域) 그리고 대조지역(對照地域)으로 강원도(江原道) 평창지격(平昌地域)에서 토양시료(土壤試料)를 채취하여 인공산성우(人工酸性雨)를 처리(處理)하고 조사분석(調査分析)한 결과(結果)를 고찰(考察)해 볼 때 다음과 같았다. pH 3.0-5.7 수준(水準)의 인공산성우(人工酸性雨)에 대하여 토양용탈용액(土壤溶脫溶液)波이 나타낸 용액(溶液) pH의 수준(水準)은 강원도지역(江原道地域)에서 pH 6.2-7.1이었고, 다음이 울산(蔚山)으로 pH 3.8-6.0, 여천(麗川)은 pH 4.0-5.4, 서울이 pH 4.0-5.5로 나타나므로써 산성우(酸性雨)에 대한 토양완충능(土壤緩衝能)은 강원도(江原道)가 가장 컸으며 서울이 가장 낮았다. 그러나 pH 2.0의 산성우처리(酸性雨處理)에서는 각 지역(地域)에서 모두 토양완충능(土壤緩衝能)이 급격히 낮아졌다. 인공산성우(人工酸性雨)의 처리(處理)에 대한 토양완충능(土壤緩衝能)은 강원도지역(江原道地域)의 경우 화강암(花崗岩) 지역(地域)과 석탄암지역간(石炭岩地域間)의 유의적(有意的)인 차이(差異)를 나타냈고 서울과 울산지역(蔚山地域)의 경우 pH 3.0-5.7의 산성우(酸性雨)에 대해서는 오염원(汚染源)으로부터 거리(距離)가 멀어 질수록 토양완충능(土壤緩衝能) 유의적(有意的)으로 증가(增加)하였다. 인공산성우처리(人工酸性雨處理)에 대한 토양완충능(土壤緩衝能)의 기작(機作)은 강원도지역(江原道地域)의 경우 양(陽)이온치환(置換)이었으며, 서울지역(地域)에서는 pH 3.0 이상(以上)의 산성우(酸性雨)에 대해서는 양(陽)이온치환(置換)이 완충작용(緩衝作用)을 주도(主導)하였으나 pH 2.0에서는 Aluminum 및 Silicate hydrolysis가 주도(主導) 하였다. 울산지역(蔚山地域)의 경우 pH 3.0 이상(以上)에서는 양(陽)이온치환(置換)이, pH 4.5 이하(以下)에서는 Aluminum hydrolysis가, 그리고 pH 3.0 이하(以下)에서는 Aluminum hydrolysis 및 Silicate hydrolysis가 주도(主導)하였다. 여천지역(麗川地域)에서는 pH 4.5에서 Silicate hydrolysis가, pH 4.5 이하(以下)에서는 Aluminum hydrolysis가 주도(主導)하였다.