• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1755-1764
• /
• 1997

In this paper, we proposed the mechanism for the buffer allocation and a cell scheduling method with logical separation a single buffer in the ATm switch, and analyzed the cell loss probability and the delay of each trafic (CBR/VBR/ABR) based on the weighted value and the dynamic cell service scheduling algorithm. The proposed switch buffering system classifies composite trafics incoming to the switch, according to the characteristic of traffic, then stores them in the logically separated buffers, and adopts the round-robin service with weighted value in order to transmit cells in buffers though one output port. We analyzed 4 cell service scheduling algorithms with dynamic round-robinfor each logically separated service line of a single buffer, in which buffers have the respective weighted values and 3 classes on mixed traffic which characteristized by traffic descriptor. In simulation, using SIMCRIPT II.5., we model the VBR and the ABR traffics as ON/OFF processes, and the CBR traffic as a Poisson processes. As the results of analysis according to the proposed buffer management mechanism and cell service algorithm, we have found that the required QoS of each VC can be quaranteed depends on a scale of weighted values allocated to buffers that changed the weighted values, and cell scheduling algorithm.

• Journal of Broadcast Engineering
• /
• v.2 no.2
• /
• pp.194-205
• /
• 1997

In video compression standards such as MPEG and H.263. rate control is one of the key components for good coding performance. This paper presents a simple adaptive rate control scheme using a piecewise linear approximation model. While conventional buffer control approach is performed by adjusting the quantization parameter linearly according to the buffer fullness. the proposed approach uses a piecewise linear approximation model derived from logarithmic relation between the quantization parameter and bitrate in data compression. In addition. a forward analyzer performed in the spatial domain is used to improve image quality. Simulation results demonstrate that the proposed method provides better performance than the conventional one and reduces the fluctuation of the PSNR per frame while maintaining the quality of the reconstructed frames at a relatively stable level.

• Journal of the Korean Institute of Gas
• /
• v.1 no.1
• /
• pp.73-80
• /
• 1997

This study was performed to develop the dispersion modeling methodology for quantitative prediction of the hazard distance or toxic buffer distance by comparing 10-min average, 30-min average, and 1-hr average maximum ground-level concentration with $Cl_2$ regultaion concentration, IDLH and ERPG-3 concentration for hazardous toxic gas, $Cl_2$ releases from the storage tank of the chemical plant facilities. For this dispersion modeling, the source term model, dispersion model, meteorological and topographical data are incorporated into the SuperChems model, and then the effects of the atmospheric stability, wind speed, and surface roughness length changes on the maxum ground-level concentration were estimated.

• Journal of Korean Society of Transportation
• /
• v.21 no.6
• /
• pp.43-55
• /
• 2003

This paper presents a new method for estimating potential transit ridership residential population and number of employees that have accesses to transit services. A standard procedure that can be used to determine transit accessibility by pedestrians ad automobiles are developed to improve its transit demand forecasting capability. The analysis results are compared with those from the traditional buffer method as well as the network ratio method. It was found that the proposed method is more accurate than the traditional methods. The new method can be used to better estimate the "Walk Access" transit trips and "Auto Access" transit trips in the Mode Choice Model.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.10
• /
• pp.512-519
• /
• 2005

E-BLP security model considers the reliability of the processes that are real subjects in systems. This paper deals with the implementation of the E-BLP model for secure embedded systems. Implemented EBSM(E-BLP Based Security Module) consists of three components: identification and authentication, access control and BRC(Dynamic Reliability Check) that checks the process behavior dynamically. Access Control of EBSM ensures unreliable processes not to access the sensitive objects and the DRC detects the buffer overflow attack by normal user. Besides, the performance overhead of the embedded system applying the EBSM is introduced.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.4
• /
• pp.534-540
• /
• 1990

In this paper the characteristics of submicron gate GaAs MESFET's have been studied using a particle model which takes into account the hot-electron transport phenomena, i.e., the velocity overshoot. \ulcornervalley(<000> direction), L valley (<111>direction), X valley (<100>direction) as the GaAs conduction energy band and optical phonon, acoustic phonon, equivalent intervalley, nonequivalent intervalley scattering as the scattering models, have been considered in this simulation. And the GaAs material and the device simulation have been done by determination of the free flight time, scattering mechanism and scattering angle according to Monte-Carlo algorithm which makes use of a particle model. As a result of the particle simulation, firstly the electron distribution, the potential energy distribution and the situation of electron displacement in 0.6 \ulcorner gate length device have been obtained. Secondly, the cutoff frequency, obtained by this method, is k47GHz which is in good agreement with the calculated result of theory. And the current-voltage characteristics curve which takes account of the buffer layer effect has been obtained. Lastly it has been verified that parasitic current at the buffer layer can be analyzed using channel depth modulation.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.416-423
• /
• 2003

This paper proposes a continuous-time queuing model of a shared-buffer packet switch and an approximate algorithm. N arrival processes have heterogeneous busty traffic characteristics. The arrival processes are modeled by Coxian distribution with order 2 that is equivalent to Interruped Poisson Process. The service time is modeled by Erlang distribution with r stages. First the approximate algorithm performs the aggregation of N arrival processes as a single state variable. Next the algorithm discompose the queuing system into N subsystems which are represented by aggregated state variables. And the balance equations based on these aggregated state variables are solved for by iterative method. Finally the algorithm is validated by comparing the results with those of simulation.

• The KIPS Transactions:PartA
• /
• v.11A no.3
• /
• pp.207-212
• /
• 2004

This paper provides the higher user QoS(Quality of Service) by analyzing media service model between server and client in single VoD(Video on Demand) environment and applying it to parallel VoD environment. Media service model is divided into the Client Pull, Server Push, and IPP(Interleaving Pull & Push) model. A server sends data based on client's request in the Client Pull Model. A server one-sidedly sends data without client's request in the Server Pull model. And the WP model unites above two models. For a parallel VoD environment, We built the PMSS system which provides the parallel media streaming services that one client is simultaneously served by several servers. In the single and parallel VoD environment, We compare and analyze the performance of service models with respect to network delay and data size in buffer. In this experiment, we found that IPP service model keeps the least network delay and stable client buffer in the parallel VoD environment. This result shows that PMSS can provide the more quality of service.

• Tunnel and Underground Space
• /
• v.29 no.1
• /
• pp.38-51
• /
• 2019

Barcelona Basic Model (BBM) can describe not only swelling owing to decrease in effective stress, but also wetting-induced swelling due to decrease in suction. And the BBM can also consider increase in cohesion and apparent preconsolidation stress with suction, and decrease in the apparent preconsolidation stress with temperature. Therefore, the BBM is widely used all over the world to predict and to analyze coupled thermo-hydro-mechanical behavior of bentonite which is considered as buffer materials at the engineered barrier system in the high-level radioactive waste disposal system. However, the BBM is not well known in Korea, so this paper introduce the BBM to Korean rock engineers and geotechnical engineers. In this study, Modified Cam Clay (MCC) model is introduced before all, because the BBM was first developed as an extension of the MCC model to unsaturated soil conditions. Then, the thermo-elasto-plastic version of the BBM is described in detail.

• Communications of the Korean Mathematical Society
• /
• v.10 no.3
• /
• pp.715-733
• /
• 1995

We present a transient queue size distribution for $M/G/m/N$ queue with state dependent arrival rates, using the diffusion process with piecewise constant diffusion parameters, with state space [0, N] and elementary return boundaries at x = 0 and x = N. The model considered here contains not only many basic model but the practical models such as as two-node cyclic queue, repairmen model and overload control in communication system with finite storage buffer. For the accuracy check, we compare the approximation results with the exact and simulation results.