• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.1355-1356
• /
• 2004

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.3
• /
• pp.211-215
• /
• 2017

This research analyzes bucket elevator roller chain pins by finite element (FE) analysis and static structural analysis for a lightweight pin design. The stress distribution of light weight roller chain pins under static load is analyzed for safety factors and damping effect. The results show that the stress distribution is higher on the plate than on the bush pin. In order to compare experimental and FE analysis results, a light weight design approach was used to produce a prototype base pin. Because the inner diameter of the pin was different, the impact damping effect was most appropriate when the inner diameter was 34.05 mm, and it is used as basic research data on the impact of the roller chain and sprocket.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.11
• /
• pp.919-925
• /
• 2016

In this study, multibody dynamic and mechanical analyses were conducted for the structure of roller chain bucket elevator system. The fatigue life of the roller chain elevator system was determined under static and fatigue loadings. Results of multibody dynamic analysis suggested that the maximum contact force occurred at the drive sprocket engagement point with the roller chain due to maximum tension. Fatigue analysis results suggest that the high load roller chain system is durable and safe because its life time is more than 700,000 cycles, close to its designed value (1,000,000 cycle). However, the contact portion of plate and pin needed a safety factor. The dynamic analysis of the heavy load roller chain was conducted with a multibody dynamic analysis program. The results obtained in this study can be utilized for dynamic analysis of roller chain systems in all industries.

• Journal of Biosystems Engineering
• /
• v.32 no.2 s.121
• /
• pp.84-90
• /
• 2007

This study was conducted to design and manufacture a final prototype of garlic separator and to evaluate its performance. The performance of garlic separation was compared with manual separation. The final prototype for garlic separation consists of bucked-elevator device for automatic feed of garlic, rotating cone typed device, blower, and power transmission device. The optimal condition of outlet clearance was 19 mm and in this clearance, the proportions of fragment garlic separated in the large quality of Namdo garlic and all quality of Uiseong garlic were above 95% and above 85%, respectively. All proportion of damaged garlic was below 5% for all variety and quality. The garlic separation capacities of this developed machine were 310 kg/h for Namdo garlic and 293.6 kg/h for Uiseong garlic in the large quality. Capacities of final prototype compared with human being were $12.9{\sim}19.6$ times for Namdo and $24.2{\sim}31.7$ times Uiseong garlic, respectively.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.342-343
• /
• 2004

조사재시험시설내 풀 ($3{\times}6{\times}10\textrm{m}^3$) 속에는 풀과 핫셀간에 조사재 및 연료를 핫셀로 이송할 수있는 버켓 엘리베이터(bucket elevator)가 설치되어 있다. 허용하중은 1톤이고, 버켓의 제원은 $25{\times}25{\times}150\textrm{cm}^3$ 이다. 버켓의 상하 운동은 체인구동 시스템으로 약 63도의 경사도를 갖고 움직이며, 체인은 사각 튜브의 내측면에 고정되어 있는 상하 가이드 레일 사이에서 특수 제작된 체인이 로울러 슬라이딩 방식으로 버켓의 lug를 잡고 상하로 움직이며 핫셀 작업대(working table) 하부에 설치되어 있는 스프로켓 휠(sprocket wheel)에 감기어 구동하도록 되어 있다.(중략)

• Cement Symposium
• /
• s.36
• /
• pp.110-115
• /
• 2009

2,3,4호 시멘트밀은 기존의 Tube MiIl 단독의 시멘트 분쇄 밀에 예비분쇄기(이하 "Polycom", Polysius 1992년 공급)를 설치, 합리화하여 운영되고 있는 Combi grinding type의 시멘트밀이다. 생산능력은 일 생산성 4,800T/D, Blaine $3,200cm^2/g$ 품질로 설계되었다. 금번 공정개선 부문인 예비분쇄공정의 Polycom 출구 Bucket Elevator(이하 "B/E") 및 Disagglomerator(이하 "DISA")로 위치는 Fig.1과 같다. Polycom 출구 B/E 및 DISA는 Polycom에서 분쇄된 원료를 분급기로 이송 및 cake 상태의 원료를 파쇄하는 설비이다. 상기 설비는 시멘트밀 공정에서 반드시 필요한 설비이나 - 잦은 고장에 따른 설비 가동율 저하 - 순환량 증가시 제한운전에 따른 생산효율저하를 일으키는 주된 설비로써 원단위 절감 및 설비가동효율 향상을 위하여 개선이 불가피한 설비임.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.242-247
• /
• 2002

가. 느타리버섯 폐면 버섯퇴비를 종균과 혼합 입상하는 폐면입상기의 주요부위는 진동식 변량공급장치, 버킷엘리베이터 승강기, 승강식 수평 벨트콘베이어 수평이송장치로 구성되며, 통로가 좁은 생육분리형 재배사와 재래식 재배사에도 적응할 수 있도록 제작되었다. 나. 폐면 공급장치의 폐면 공급성능은 캠행정이 13mm로부터 16mm, 19mm로 커 질수록, 캠축의 회전수가 300rpm에서 700rpm으로 증가할수록 폐면의 공급성능은 높아지는 경향이었다. 다. 폐면 공급장치의 공급성능과 기체진동, 폐면 부착수준 등의 작업상태를 고려할 때 캠행정 16mm 회전수 550rpm 내외가 적당한 것으로 판단된다. 라. 시작기의 작업능률은 표준규격 200m$^3$인 버섯재배사 1동 1회당 14시간으로 관행(인력)작업의 50시간에 비해 3.5배 능률적이었다. 마. 버섯입상, 종균접종 작업경비는 1동 1회당 관행(인력)작업이 320,800원/200m$^3$.동에 비해 시작기는 130,300원/200m$^3$.동으로서 59,7%의 작업경비를 절감할 수 있는 것으로 분석되었다.

• Journal of Biosystems Engineering
• /
• v.42 no.1
• /
• pp.12-22
• /
• 2017

Purpose: This aim of this study was to develop a pick-up type pulse crop harvester for harvesting cut and dried pulse crop. Methods: The pick-up type pulse crop harvester was designed and constructed. Its specifications and operating performance were investigated. Results: Compared with conventional bean harvesters, the pick-up type pulse crop harvester adopted seven rows of chains with tines to pick-up the cut and dried pulse crop on a flat or ridged field, two transverse threshing drums with steel wire teeth to reduce the threshing speed, and a tilt plate and plastic bucket elevator for conveying clean grain to reduce damage. The threshing speed and the oscillating frequency of the separating and cleaning parts according to crop type and condition could be varied easily to efficiently use engine power and to improve harvesting performance. The harvester showed forward speed ranges of 0 ~ 1.5 m/s during harvesting operation, and 0 ~ 2.5 m/s during road travelling. The pick-up width of the harvester was about 1 m. Conclusions: The pick-up type self-propelled 51.5 kW harvester was designed and constructed to harvest cut and dried pulse crop. The effective field capacity of the harvester was predicted as above 40 a/h.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.162-167
• /
• 2003

The pool $(3m{\times}6m{\times}10m)$ in Irradiated Materials Examination Facility is usually used for the purpose of taking the specimen out of cask loaded into the pool, and carrying in/out the specimen to/from the hot cell. Always, it must be cared for the water into the pool to be fine condition because all operation are worked with the naked eye during taking an irradiated materials out of the cask and plunging them in the bucket-elevator. In the aspects of the radioactive contamination control, remained substances in the water must be controlled so that the amount of substances are to be lower than the standard amount prescribed by RCA Korea Activity in a part of radioactive contamination control. This paper describes a behavior of the quality of water and the radioactive contamination of pool water for working of pool water purging system and contamination diffusion distribution bahavior of each specimens carried in/out.