• 제목/요약/키워드: Buck boost DC-DC converter

검색결과 185건 처리시간 0.026초

LabVIEW와 DSP를 이용한 초저가 범용 태양광 발전시스템 VI-Tracer 개발 (Development of a Low Cost VI-Tracer for PV System using LabVIEW and DSP)

  • 김상용;박상수;장성재;김경훈;서효룡;박민원;유인근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 제40회 하계학술대회
    • /
    • pp.1049_1050
    • /
    • 2009
  • This paper deals with development of a low cost VI(Voltage-Currrent)-tracer for PV(Photovoltaic) system using LabVIEW and DSP(Digital Signal Processor). Although the conventional VI-tracer is a high cost equipment, it can‘t abstract the detailed parameters of solar cell. To overcome above mentioned disadvantages, in this paper, a converter type VI-tracer is developed. The DSP, which controls the buck-boost DC-DC converter, is used to implement the proposed VI-tracer algorithm. The proposed VI-tracer can abstract more detailed parameters of solar cell; A(temperature constant), Rs(series resistance), and Rsh(parallel resistance). The authors emphasize that the proposed VI-tracer can satisfy the users who need to get various parameters. A comparison between the proposed VI-tracer and the conventional VI-tracer is presented to show the effectiveness of the proposed system.

  • PDF

전기자동차용 OBC 일체형 1.5kW급 LDC 컨버터에 대한 연구 (A Study on OBC Integrated 1.5kW LDC Converter for Electric Vehicle.)

  • 김형식;전준혁;김희준;안준선
    • 한국정보전자통신기술학회논문지
    • /
    • 제12권4호
    • /
    • pp.456-465
    • /
    • 2019
  • PHEV(Plug in Hybrid Electric Vehicle)와 BEV(Battery Electric Vehicle)는 모터 및 차량 전장 시스템의 구동을 위하여 고전압 배터리를 사용하며 이를 충전시켜주는 OBC(On-Board Charger)와 고전압에서 저전압으로 전력변환을 해주는 LDC(Low DC/DC Converter)가 반드시 필요하다. OBC와 LDC는 차량에 독립적인 시스템으로 동작 하며 개별 공간을 사용하기 때문에 이를 통합한 시스템을 활용하여 무게 및 사용 공간 확보에 대한 필요성이 대두 되고 있다. 본 논문은 LDC 트랜스포머의 설계를 단순화하여 절연형 전류원 컨버터를 사용한 OBC에 통합이 가능한 1.5kW급 LDC컨버터에 대하여 제안하였다. 제안된 LDC는 양방향 벅-부스트 컨버터의 고정된 임의의 출력 전압을 사용하여 LDC의 최종 출력 전압의 제어가 가능하기 때문에 기존의 OBC-LDC 통합 시스템과 비교하여 배터리 전압 사용 범위, 컨버터의 Duty Ratio 및 OBC의 출력 턴 비를 고려한 트랜스포머 설계에 대한 부분을 단순화 할 수 있는 장점을 가지고 있다. 제안된 LDC의 시제품을 제작하여 200V ~ 400V의 입력 전압에서 정상 동작을 확인 하였으며 정격 부하 조건에서 최대 효율 91.885%를 달성 하였다. 또한 OBC-LDC통합 시스템 구축을 통해 약 6.51L의 부피를 달성 하였으며 기존 독립적인 시스템에 비해 15.6% 저감되어 공간 확보에 대한 이점을 확인 할 수 있었다.

충전기 겸용 스위치드 릴럭턴스 전동기의 제로토크제어 (Zero Torque Control of Switched Reluctance Motor for Integral Charging)

  • 라쉬디;나마찌;세헤이안;이동희;안진우
    • 전기학회논문지
    • /
    • 제66권2호
    • /
    • pp.328-338
    • /
    • 2017
  • In this paper, a zero torque control scheme adopting current sharing function (CSF) used in integrated Switched Reluctance Motor (SRM) drive with DC battery charger is proposed. The proposed control scheme is able to achieve the keeping position (KP), zero torque (ZT) and power factor correction (PFC) at the same time with a simple novel current sharing function algorithm. The proposed CSF makes the proper reference for each phase windings of SRM to satisfy the total charging current of the battery with zero torque output to hold still position with power factor correction, and the copper loss minimization during of battery charging is also achieved during this process. Based on these, CSFs can be used without any recalculation of the optimal current at every sampling time. In this proposed integrated battery charger system, the cost effective, volume and weight reduction and power enlargement is realized by function multiplexing of the motor winding and asymmetric SR converter. By using the phase winding as large inductors for charging process, and taking the asymmetric SR converter as an interleaved converter with boost mode operation, the EV can be charged effectively and successfully with minimum integral system. In this integral system, there is a position sliding mode controller used to overcome any uncertainty such as mutual inductance or DC offset current sensor. Power factor correction and voltage adaption are obtained with three-phase buck type converter (or current source rectifier) that is cascaded with conventional SRM, one for wide input and output voltage range. The practicability is validated by the simulation and experimental results by using a laboratory 3-hp SRM setup based on TI TMS320F28335 platform.

태양광 마이크로 인버터의 Power Decoupling을 위한 양방향 벅-부스트 컨버터 제어기 설계 (Controller Design of Bidirectional Buck-Boost Converter for Power Decoupling of Photovoltaic Micro-Inverter)

  • 신종현;박종후
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2014년도 추계학술대회 논문집
    • /
    • pp.13-14
    • /
    • 2014
  • 본 논문에서는 유사 DC-Link 타입의 태양광 마이크로 인버터에서 요구되는 대용량의 전해 커패시터의 단점을 지적하고 이를 제거하기 위해 shunt 방식으로 연결되는 양방향 벅-부스트 컨버터 제어방법을 제안한다. 태양광 마이크로 인버터는 동작 특성상 PV 입력단에 120Hz 리플이 존재하지만 대용량의 전해 커패시터를 적용함으로써 리플을 제거할 수 있다. 하지만 전해 커패시터의 짧은 수명이 전체 시스템의 신뢰성을 저하시키기 때문에 이를 극복하기 위한 부가적인 회로가 필요하다. 본 논문에서는 제안한 1차측의 플라이백 스위치 전류 제어기의 레퍼런스를 공유함으로써 전류 센서수를 감소시키고 PV 입력단 Capacitance를 낮출 수 있는 양방향 벅-부스트 회로의 제어기를 시뮬레이션을 통하여 검증하였다.

  • PDF

용량성 아이들링 SEPIC의 분석 및 구현 (Analysis and Implementation of the Capacitive Idling SEPIC)

  • 최동훈;조경현;나희수
    • 전자공학회논문지SC
    • /
    • 제40권1호
    • /
    • pp.39-44
    • /
    • 2003
  • 휴대용 전자기기가 많이 개발되고 보급됨에 따라서 배터리의 중요성은 점점 커져가고 있다. 기기의 수명을 늘이고자 고전력밀도의 배터리를 요구하게 되었고, 현재에는 리튬-이온 배터리를 많이 사용하게 되었다. 단위체적 및 중량당의 전력밀도 부분에서는 기존에 사용하던 배터리보다 성능이 우수하지만, 방전전압이 감소하는 특성이 있기 때문에 배터리의 수명을 최대한 늘리기 위해서는 이 특성에 알맞은 컨버터가 필요하다. 그래서 리튬-이온 배터리를 사용하는 휴대용 저전력 전자기기의 전원부로써 용량성 아이들링 SEPIC을 제안하였다. 승압과 강압이 가능한 SEPIC의 특성을 가지면서, 추가된 스위치와 다이오드를 통해서 스위치에 부분적인 소프트 전환을 가능하게 하기 때문에, 스위칭 주파수의 증가를 가능하게 한다. 본 논문에서는 직류 정상상태의 전압전환비, 동작모드별 회로 및 회의특성을 분석하고 구현하였다.