• Journal of Korean Dental Science
• /
• v.17 no.2
• /
• pp.53-63
• /
• 2024

Purpose: To investigate the effects of simultaneous soft and hard tissue augmentation and the addition of polydeoxyribonucleotide (PDRN) on regenerative outcomes. Materials and Methods: In five mongrel dogs, chronic ridge defects were established in both mandibles. Six implants were placed in the mandible, producing buccal dehiscence defects. The implants were randomly allocated to one of the following groups: 1) control: no treatment; 2) GBR: guided bone regeneration (GBR) only; 3) GBR/PDRN: GBR+PDRN application to bone substitute particles; 4) GBR/CTG: GBR+connective tissue grafting (CTG); 5) GBR/VCMX: GBR+soft tissue augmentation using volume stable collagen matrix (VCMX); and 6) group GBR/VCMX/PDRN: GBR+VCMX soaked with PDRN. The healing abutments were connected to the implants to provide additional room for tissue regeneration. Submerged healing was achieved. The animals were euthanized after four months. Histological and histomorphometric analyses were then performed. Results: Healing abutments were gradually exposed during the healing period. Histologically, minimal new bone formation was observed in the dehiscence defects. No specific differences were found between the groups regarding collagen fiber orientation and density in the augmented area. No traces of CTG or VCMX were detected. Histomorphometrically, the mean tissue thickness was greater in the control group than in the other groups above the implant shoulder (IS). Below the IS level, the CTG and PDRN groups exhibited more favorable tissue thickness than the other groups. Conclusion: Failure of submerged healing after tissue augmentation deteriorated the tissue contour. PDRN appears to have a positive effect on soft tissues.

• Journal of Periodontal and Implant Science
• /
• v.29 no.3
• /
• pp.469-484
• /
• 1999

The purpose of this study was to evaluate new bone formation following guided bone regeneration by resorbable and nonresorbable membrane. Six adult mongrel dogs were used. The first, second, third, fourth premolars in the mandible of each dog were extracted. Two months after tooth extraction, a buccal dehiscence defect was surgically created on each edentulous area. The experimental sites were divided into three groups according to the treatment modalities ; Group I-a: surgical treatment only ; Group I -b: allogenic decalcified freezed dried bone grafting ; Group II-a : e- PTFE membrane placement only ; Group II-b : allogenic decalcified freezed dried bone grafting and e-PTFE membrane placement ; Group III-a : Vicryl(R) mesh placement only ; Group III-b : allogenic decalcified freezed dried bone grafting and Vicryl(R) mesh placement . The animals were sacrificed at 8 weeks after operation and the specimens were prepared for histologic and histometric examination. The results were as follows : Clinically, all defect sites were healed without exposure of barrier membrane after the eight weeks. In Group I-a, dense connective tissues were impinged in the bony defect area. Well vascularized and fibrous bone marrow indicated that bone formation was still taking place was found. In Group I-b, in areas closer to the periphery, lamellation of the newly formed bone would found. In Group II-a, beneath the e-PTFE membrane a dense layer of connective tissue covering the most external portions of the regenerated tissue was seen. The new bone surfaces were lined with osteoid and osteoblast. In Group II-b, a dense layer of connective tissue covering the most external portions of the regenerated tissue was observed beneath the e-PTFE membrane. A notable amount of alveolar ridge regeneration was seen with new rigdes with well-contoured form. In Group III-a, the new bone surface were lined with osteoid and osteoblast, indicating active bone formation. A clear demarcation could not be noted between the host bone and new bone. In Group III-b, a notable amount of alveolar ridge regeneration was seen with new ridges assuming wellcontoured form. In areas closer to the periphery, lamellation of the newly formed bone would found. As histometric examination, the amount of bone formation was gained from $12.8mm^2$ to $26.3mm^2$. It was significantly greater in group II-b and group III-b compared to other groups(p<0.05) . These results suggest that Vicryl(R) mesh after DFDB grafting used in guided bone regeneration could create and sustain sufficient space for new bone formation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.3
• /
• pp.248-258
• /
• 2005

The challenging task of classifying the fibro-osseous(FO) lesions has been previously attempted but only in the past 15 years has the entire spectrum of diversity been appreciated. For the clinicians, it is hard to clearly diagnose the lesions before operations. The purpose of this study was to review the literature about fibro-osseous lesions of the jaws and to analyse our clinical cases. As the results of the review of clinical features, radiography and histopathologic findings of sixteen cases of fibro-osseous lesions, we could elucidate diagnostic aids for treatment of benign FO lesion in jaws. Six patients involving fibrous dysplasia complained the facial swelling and facial asymmetry. The radiographic features of the lesions showed ground-glass radiopacity mostly and the histologic findings showed typically Chinese character-shaped trabeculae without osteoblastic rimming in the fibrous stroma. Six patients with ossifying fibroma were notified as swollen buccal cheek state. Their radiographic findings showed cortical expanded radiolucent lesion with sclerotic defined border, which was contrast to the normal adjacent bone. The lesions showed variant radiolucent lesions. Histological findings were revealed as cellular fibrous stroma with woven bones, variable patterns of calcifications. Three patients with cemental dysplasia didn't have specific complaints. Well circumscribed radiopaque lesions on mandibular molar area were observed. Cementum-like ossicles with fibrous stroma were found on microscopic findings. A osteoblastoma case with jaw pain was found. The radiographic feature was a mottled, dense radiopacity with osteolytic border on mandibular molar area. Under microscopy trabecule of osteoid with vascular network were predominantly found. Numerous osteoblast cells with woven bone were found. These clinical, radiographic and microscopic findings of benign fibrous-osseous lesions would suggest diagnostic criteria for each entity of FO lesions.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.1
• /
• pp.34-42
• /
• 2004

The appropriate care to the dental emergency patients is much important in the aspect of community dental service. To attain such a purpose, the sacred duty of the training of oral and maxillofacial surgeons is required. So, a retrospective study on the characteristics of dental injuries and diseases in emergency care unit will be very meaningful. This study was carried by reviewing the charts and radiographic films of 3,394 patients, treated for dental emergency at Wonju Christian Hospital, Republic of Korea, from January 1, 1993 to December 31, 2002. All patients were classified to 6 groups including trauma, toothache, infection, hemorrhage, TMJ disorder and the others. The clinical characteristics of diseases and treatment modalities according to each group were analyzed. The trauma (73.9%) was the most frequent cause in dental emergency patients, and acute toothache, odontogenic infection, oral hemorrhage, and TMJ disorder were next in order. Gender prediction was male (68%), there were many patients on May and December in the monthly frequency, and the most frequent age group was from 0 to 9 years. In the trauma group, male (68.6%) was predominant, and soft tissue injuries and primary closures were the most frequent type of injury and treatment. In jaw fractures, traffic accidents were the most cause and the weakest site was mandibular symphysis area, and mandibular angle, condyle, and body area were next in order. In the acute toothache group, the cause was dental pulpitis mostly and treatment for that was drug administration mainly. Buccal space abscess in infection group had the largest incidence (24.5%), and common treatments were incision and drainage and medications. In the hemorrhage group, a major cause was postoperative bleeding (60.3%) and hemostasis was obtained by pressure dressing, curettage and suture. For the TMJ disorder group, the peak incidence (63.8%) was shown in the post-traumatic myofascial pain dysfunction syndrome and its primary care was medication such as analgesics and sedatives. In the other group, the various specific symptoms were complained due to acute sialadenitis, trigeminal neuralgia, acute stomatitis, chemical burn, terminal stage neuritis of head and neck cancer, and foreign body aspiration. In conclusion, for the rapid and proper care of the emergency dental diseases, well-trained education should be presented to the intern and resident course of oral and maxillofacial surgery. And it is demanded that oral and maxillofacial surgeons must be prepared in knowledge and skill for such emergency care.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.291-298
• /
• 2017

It is challenging to produce esthetic implant restoration in the narrow anterior maxilla region where insufficient volume of alveolar bone could limit the angle and position of implant fixture, if preceding bone augmentation is not considered. Ideal angle and position of implant fixture placement should be established to reproduce harmonious emergence profile with marginal gingiva of implant prosthesis, bone augmentation considered to be preceded before implant placement occasionally. In this case, preceding bone augmentation has been operated before esthetic implant prosthesis in narrow anterior maxilla region. Preceded excessive bone augmentation in buccal area allowed proper angulation of implantation, which compensates unfavorable implant position. Provisional restorations were corrected during sufficient period to make harmonious level of marginal gingiva and interdental papilla. The definite restoration was fabricated using zirconia core based glass ceramic. Functionally and esthetically satisfactory results were obtained.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.4
• /
• pp.324-331
• /
• 2001

The present study was aimed to investigate the effects of latency period on alveolar ridge distraction using the intraoral distraction device. Nine adult mongrel dogs of either sex, weighing about 15kg, were used. They were divided into 3-day, 5-day, and 7-day groups according to the latency period. The left upper and lower premolars and first molars were extracted. Twelve weeks after the extraction, an osteotomy was performed and the distraction device was applied. After the latency period, the distraction was applied at a rate of 1.2mm for 8 days. The distraction device was left in place for 2 weeks to allow consolidation and was then removed. The animals were sacrified at 8 weeks after completion of distraction and were examined macroscopically, radiographically, and histologically. After completion of the distraction, the alveolar crest protruded prominently, showing the vertical augmentation of the alveolar bone. Soft tissues were broken down after the 6th day of distraction in 3-day latency group, and premature union occurred on the 7th day of distraction in the 7-day latency group. The average distance was $9.40{\pm}0.3mm$ in 3-day latency group, $9.35{\pm}0.1mm$ in 5-day latency group, and $8.85{\pm}0.1mm$ in 7-day latency group. In the radiograph taken at 8 weeks after distraction, there was slight bone resorption around the medial and distal edges of the alveolar bone segment, and a new bone deposition was observed in the neighboring alveolar crest area in all groups. Fibrous tissues were present in a part of the buccal cortical bone area of the distraction gap, and the woven and lamellar bones were observed in the distracted gap. There were bony bridges in the distraction gap in all animals examined. These results suggest that optimal time of latency period on alveolar ridge distraction using the intraoral distraction device is about 5 days in dogs, and about 7days in human beings.

• Journal of Periodontal and Implant Science
• /
• v.24 no.3
• /
• pp.671-689
• /
• 1994

The purpose of this study was to compare effects of various bone grafts on periodontal regeneration of alveolar bone defects in dogs. Seven adult dogs aged 12 to 18 months were used in this study. Experimental alveolar bone defects were created surgically with a #1/2 round bur at the furcation area of the buccal surface of the mandibular 3rd, 4th premolars and 1st molar. Each experimental alveolar bone defects were grafted with dense hydroxyapatite, natural coral, and decalcified freeze-dried bone, and respectively divided into DHA, NC, DFDB group. An area without bone graft was divided into control group. At 1,2,4,6, and 12 weeks, dogs were serially sacrificed and specimens were prepared with Hematoxylin-Eosin stain and Mallory stain for light microscopic evaluation. The results of this study were as follows : 1. In control group, the matrix change of granulation tissue was observed at 1 week. And in experimental groups, the appearance of connective tissue around graft materials was loosely formed at 1 week, but densely formed at 2 weeks. 2. In every group, the slight formation of new trabecular bone was seen from remaining bone at 1 week. 3. The DHA and NC particles were gradually encapsulated by new trabecular bone from remaining bone, and the osteoid tissue was directly induced from DFDB particles. 4. The presence of osteoblasts was first observed at 1 week in control group and at 2 weeks in NC group, but at 6 weeks in DHA group. 5. In DHA group, the resorption of particles was not observed until 12 weeks. But in NC and DFDB group, the particles were resorbed at 6 weeks and replaced by new bone. And the amount and size of particles were reduced, and their border represented irregular form. In summary, in three experimental groups the inflammatory or foreign body reaction were slight, but the regeneration of new osteoid tissue and the matrix change of dense connective tissue fiber were observed. Especially, NC and DFDB materials were considered as the biocompatible graft materials which were effective in the regenertion of new bone.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.136-143
• /
• 2008

Infections involved with the oral and maxillofacial area are associated with various anatomical structures. If the proper treatment is not done in an immediate period, the infections will be quite fatal. The causes of the infections are numerous, but the most common cause of odontogenic infections in children is a dental caries. It is known to lead to some kinds of diseases such as periapical abscess, cellulitis, osteomyelitis, Ludwig's angina, toxic shock syndrome and so on. The common pathogenic sequence of fascial abscess is a necrotic pulpal inflammation in the form of dentoalvelor abscess which spreads over and gradually penetrates into the fascial membranes through the cortical bones and finally contracts the potential fascial spaces. If the infections of oral maxillofacial area were penetrated into the surrounding soft tissues, then they would diffuse into the directions of the least tissue resistance along with the connective tissues and the fascial spaces. These infections can be properly cured by tooth extraction, endodontic therapy, surgical treatment including Incision & drainage and antibiotics. The purpose of the cases is to report the satisfactory treatment results in the patients derived from the canine fascial space abscesss or buccal fascial space ones of the odontogenic origin.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.1
• /
• pp.63-94
• /
• 1990

The purpose of this study was to analyze the displacement and the magnitude and the mode of distribution of the stresses in the lower overdenture, the mucous membrane, the abutment tooth and the mandibular supporting bone when various denture base materials, such as acrylic resin and 0.5mm metal base, and various denture base designs were subjected to different loading schemes. For this study, the two-dimensional finite element method was used. Mandibular arch models, with only canine remaining, were fabricated. In the first denture base design, a space, approximately 1mm thick, was prepared between the denture and the dome abutment. In the second denture base design, contact between the denture and the dome abutment was eliminated except the contact of the occlusal third of the abutment. In order to represent the same physiological condition as the fixed areas of the mandible under loading schemes, the eight nodes which lie at the mandibular angle region, the coronoid process and the mandibular condyle were assumed to be fixed. Each model was loaded with a magnitude of 10 kgs on the first molar region(P1) and 7 kgs on the central incisal region (P2) in a vertical direction. Then the force of 10 kgs was applied distributively from the first premolar to the second molar of each model in a vertical direction(P3). The results were as follows. : 1. When the testing vertical loads were given to the selected points of the overdenture, the overdenture showed the rotatory phenomenon, as well as sinking and the displacements of alveolar ridge, abutment and lower border of mandible under the metal base overdenture were less than those under the acrylic resin overdenture. 2. The maximum principal stresses(the maximum tensile stresses) being considered, high tensile stresses occured at the buccal shelf area, the posterior region of the ridge crest and the anterior border region of the mandibular ramus. 3. The minimum principal stresses(the maximum compressive stresses) being considered, high compressive stresses occured at the inferior and posterior border region of the mandible, the mandibular angle and the posterior border region of the mandibular ramus. 4. The vertical load on the central incisal region(P2) produced higher equivalent stress in the mandible than that on any other region(P1, P3) because of the long lever arm distance from the fixed points to the loading point. 5. Higher equivalent stresses were distributed throughout the metal base overdenture than the resin base overdenture under the same loading condition. 6. The case of occlusal third contact of the abutment to the denture produced higher equivalent stresses in the abutment, the mandibular area around the abutment and the overdenture than the case of a 1mm space between the denture and the abutment. 7. Without regard to overdenture base materials and designs, the amounts and distribution patterns of equivalent stresses under the same loading condition were similar in the mucous membrane.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.191-203
• /
• 2005

Statement of problem. In Korea, the preliminary impression trays for dental and edentulous maxillae are manufactured on the base of the statistical value of Westerners. There had been less study on the dental and edentulous arches of Koreans. Purpose. The purpose of this study was to evaluate an average dental cast, preliminary impression trays, three-dimensional relation of dental and edentulous maxilla of Koreans Material and methods. The subjects for this study were 173 dental casts of maxilla (dental: 52, edentulous : 146) with ages $18\{\sim}60$ years old. Each of the master casts was measured 69 measuring points on the dental cast or maxilla, and 46 measuring points on the edentulous cast of maxilla with three-dimensional digital measuring machine. Each measuring points were analysed and were overlapped, that three dimensional dental graphic manufactured by CAD/CAM system. Results. 1. A standard of distribution to alveolar bone were width between left and right buccal border lines of the standard 3/4 line. The mean value of dental and edentulous casts were 67.27mm, 63.49mm respectively. 2. Morphological classification of dental casts were divided into three groups or V-shape, O-shape, U-shape, that proportion of distribution were 17%, 16%, 67%, respectively. Dimensional classification of the dental casts were divided into five groups of less than 63mm, 63 up to 65mm, 65 up to 67mm. 67 up to 69mm, more than 69mm, respectively. 3. Morphological classification of edentulous casts were divided into three groups or V-shape, O-shape, U-shape, that proportion of distribution were 18%, 17%, 65%, respectively Dimensional classification of the edentulous casts were divided into five groups of less than 57mm, 57 up to 61mm, 61 up to 65mm, 65 up to 69mm, more than 69mm, respectively. 4. Mean dental and edentulous cast of maxilla were overlapped, the proportion of bone resorption to alveolar bone is higher than that of palatal bone, its difference were higher anterior 2/4 area than posterior 3/4 area. Conclusion. It obtains information of preliminary impression trays for dental and edentulous maxilla of Koreans.