• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.1
• /
• pp.34-40
• /
• 2012

Purpose: The study was performed to compare patients with anatomical variations in facial asymmetry with patients in the normal range using cone-beam computed tomography (CBCT) and to take the preoperative condition into consideration in the case of a sagittal split ramus osteotomy (SSRO). Methods: The study was conducted on 46 adult patients composed of 2 subdivided groups, an asymmetry group (n=26) and a symmetry group (n=20). The asymmetry group was divided between patients with hemimandibular hyperplasia (HH, n=8) and hemimandibular elongation (HE, n=18). Using cross-sectional computed tomography images, the thickness of cancelleous bone in the buccal area of the mandible, thickness of buccal cortex in the buccal aspect of the mandible, thickness of cancellous bone in the inferior aspect of the mandible, thickness of buccal cortex in the inferior aspect of the mandible, and cross-sectional surface area of the mandible were measured. Results: In the asymmetry group, the cross-sectional area of the mandible including the inferior alveolar nerve positioned on the affected side was significantly different from the symmetry group. Thickness of cancelleous bone in the buccal aspect of the mandible, thickness of cancelleous bone in the inferior aspect of the mandible, and cross-sectional surface area of the mandible in the affected site of hemimandibular hyperplasia was significantly smaller than in the symmetry group. Conclusion: The inferior alveolar nerve runs lower and in a more buccal direction and shows a smaller cross-sectional surface of the mandible in the hemimandibular hyperplasia patients with asymmetry.

• The Journal of the Korean Society for Microbiology
• /
• v.21 no.4
• /
• pp.407-415
• /
• 1986

This study investigated whether a correlation exists between environmental physical and biochemical factors and adherence of Candida albicans to human buccal epithelial cells by using normal and UV-irradiated strains. The results were as follows: 1. The percentage of germ tube forming activities of normal Candida albicans was 91.5% and UV-irradiated Candida albicans was 15.0%. The $LD_{50}$ of normal strains in mice were $1.0{\times}10\;cells/ml$, but could not be observed in the UV-irradiated strains even with $1.0{\times}10\;cells/ml$. It demonstrated that the virulence is decreased in the UV-irradiated strain. 2. The adherence of normal Candida albicans to human buccal epithelial cells($166{\pm}29{\sim}207{\pm}17\;cells$/100 epithelial cells) was significantly greater than UV-irradiated Candida albicans($99{\pm}21{\sim}131{\pm}25\;cells$/100 epithelial cells). 3. Candida albicans cultured at $37^{\circ}C$ adhered to buccal epithelial cells($166{\pm}16{\sim}207{\pm}17\;cells$/100 epithelial cells) in greater numbers than cultured at $25^{\circ}C$($80{\pm}15{\sim}143{\pm}22\;cells$/100 epithelial cells). 4. On comparison of the adherence of viable and nonviable(heat-killed) Candida albicans to human buccal epithelial cells, the nonviable Candida albicans demonstrated poorer adherence than viable Candida albicans. 5. Adherence in vitro of Candida albicans to human epithelial cells appeared to be effected by the pH. The adherence ability was maximum increased at pH 7.0($187{\pm}22\;cells$/100 epithelial cells) other than experimental pH. 6. The adherence was proportional to the incubation time and the Candida cell concentration in the suspension. 7. A strong correlation was shown between germ tube forming activity and increased adherence of Candida albicans to human epithelial cells, indicating that germ tube forming activity were responsible for candidal virulence.

• Archives of Craniofacial Surgery
• /
• v.18 no.3
• /
• pp.218-221
• /
• 2017

A solitary fibrous tumor is a relatively uncommon neoplasm that usually occurs in the pleura but occurs extremely rarely in the oral cavity. Reported herein is a rare case of a solitary fibrous tumor in the buccal cheek mucosa. A 50-year-old man visited the authors' hospital due to a buccal cheek mass whose size had increased. Excisional biopsy was done under local anesthesia. After the excisional biopsy, the patient was diagnosed to have a solitary fibrous tumor. In immunohistochemistry, the patient's solitary fibrous tumor was characterized by the expression of CD34 and CD99 on the neoplastic cells, and negativity for Bcl-2 and S-100. No recurrence or complication occurred for a period of 5 years. The growth of a primary solitary fibrous tumor in the buccal cheek mucosa is extremely rare and has been rarely reported in the South Korean medical literature. A solitary fibrous tumor must be distinguished from other spindle cell tumors. Presented herein is a case of primary solitary fibrous tumor in the buccal cheek mucosa. The relevant literature is briefly reviewed.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.20 no.6
• /
• pp.387-395
• /
• 2020

Background: The anterior-middle superior alveolar (AMSA) anesthetic technique has been reported to be a less traumatic alternative to several conventional nerve blocks and local infiltration for anesthesia of the maxillary teeth, their periodontium, and the palate. However, its anatomic basis remains controversial. The present study aimed to determine if the pattern of cortical and cancellous bone density in the maxillary premolar region can provide a rationale for the success of the AMSA anesthetic technique. Method: Cone-beam computed tomography scans of 66 maxillary quadrants from 34 patients (16 men and 18 women) were evaluated using a volumetric imaging software for cortical and cancellous bone densities in three interdental regions between the canine and first molar. Bone density was measured in Hounsfield units (HU) separately for the buccal cortical, palatal cortical, buccal cancellous, and palatal cancellous bones. Mean HU values were compared using the Mann-Whitney U test and one-way ANOVA with post-hoc analysis. Results: Cancellous bone density was significantly lower (P ≤ 0.001) in the palatal half than in the buccal half across all three interdental regions. However, there was no significant difference (P = 0.106) between the buccal and palatal cortical bone densities at the site of AMSA injection. No significant difference was observed between the two genders for any of the evaluated parameters. Conclusions: The palatal half of the cancellous bone had a significantly lower density than the buccal half, which could be a reason for the effective diffusion of the anesthetic solution following a palatal injection during the AMSA anesthetic technique.

• Archives of Craniofacial Surgery
• /
• v.24 no.5
• /
• pp.211-217
• /
• 2023

Background: Oral cavity cancers, the second most common type in India, are responsible for 10% of the overall cancer burden. With a recurrence rate of 30% to 40% and a 5-year survival rate of 50%, these malignancies account for substantial morbidity and mortality. Despite advances in treatment modalities, survival rates following treatment completion have not improved significantly. The present study aimed to establish specific epidemiological and pathological factors responsible for recurrence after treatment completion in buccal mucosa cancers. Methods: A retrospective analysis of the data of 116 patients treated for biopsy-proven cancers of the buccal mucosa was undertaken 1 year after treatment completion. Factors such as age, sex, education, lymphovascular invasion, extranodal extension (ENE), perineural invasion, depth of invasion, and pathological margin status were compared between patients who presented with recurrence and those who did not. Statistical significance was set at p< 0.05. Results: Of the 116 patients, 40 (34.5%) developed a recurrent disease within 1 year. The mean age of the study population was 43.3 years, and males constituted 91.4% of the included patients. Ipsilateral buccal mucosa was the commonest site of disease recurrence. Neck node metastasis, ENE, and margins of resection < 5 mm were significantly related to the recurrence of disease. However, surprisingly, lymphovascular invasion, perineural invasion, and depth of invasion > 10 mm did not show statistically significant associations. Conclusion: Neck node metastasis, ENE, and margins of resection < 5 mm were the histopathological factors associated with recurrence in cancers of the buccal mucosa.

• The korean journal of orthodontics
• /
• v.54 no.3
• /
• pp.142-152
• /
• 2024

Objective: This retrospective cohort study aimed to assess and compare the accuracy of 3 different Invisalign^® treatment regimens in terms of variations of aligner change frequency and type of aligner material in achieving maxillary dental buccal expansion. Methods: Altogether, 120 adult patients whose treatment involved maxillary dental expansion with Invisalign^® were included. The patients were divided into 3 groups, with each group comprising 40 patients as follows: SmartTrack^® 1-week changes (ST1), SmartTrack^® 2-week changes (ST2), and EX30^® 2-week changes (EX2). The groups were assessed by comparing actual changes achieved with those prescribed by ClinCheck^®. The rates of clinically significant inaccuracies (CSI) observed for buccal expansion (≥ 0.5 mm) and buccolingual inclination (≥ 2°) during expansion were then determined. Results: In terms of expansion, the ST1 group demonstrated the highest CSI rate at all tooth levels, whereas the ST2 group had the lowest rate of CSI and the lowest mean inaccuracy for each tooth level. In terms of buccolingual inclination, the ST1 group had the highest CSI rate across all tooth levels, whereas the EX2 group had the lowest CSI rate at all tooth levels except for the canine level where the ST2 group had the lowest CSI rate. A tendency toward overexpression of buccal crown inclination, and underexpression of buccal expansion was observed at all tooth levels. Conclusions: Two-week aligner change regimens offer improved accuracy compared with 1-week aligner changes. SmartTrack^® 2-week changes were the most accurate for buccal expansion, whereas EX30^® 2-week changes were the most accurate for buccolingual inclination.

• The korean journal of orthodontics
• /
• v.31 no.6 s.89
• /
• pp.549-558
• /
• 2001

This study was undertaken to demonstrate the forces in the maxillary alveolar bone generated by the activation of the maxillary posterior crossbite appliance In the treatment of posterior buccal crossbite caused by buccal ectopic eruption of the maxillary second molar. A photoelastic model was fabricated using a Photoelastic material (PL-3) to simulate alveolar bone and ivory-colored resin teeth. The model was observed throughout the anterior and posterior view in a circular polariscope and recorded photographically before and after activation of the maxillary posterior crossbite appliance. The following conclusions were reached from this investigation : 1. When the traction force was applied on the palatal surface of the second molar, stresses were concentrated at the buccal and palatal root apices and alveolar crest area. The axis of rotation of palatal root was at the root apex and that of the buccal root was at the root li4 area. In this result, palatal tipping and rotating force were generated. 2. When the traction force was applied on the buccal surface of the second molar, more stresses than loading on the palatal surface were observed in the palatal and buccal root apices. Furthermore, the heavier stresses creating an intrusive force and controlled tipping force were recorded below the buccal and palatal root apices below the palatal root surface. In addition, the axis of rotation of palatal root disappeared whereas the rotation axis of the buccal root moved to the root apex from the apical 1/4 area. 3. When the traction force was simultaneously applied on the maxillary right and left second molars, the stress intensity around the maxillary first molar root area was greater than the stress generated by the only buccal traction of the maxillary right or left second molar. As in above mentioned results, we should realize that force application on the palatal surface of second molars with the maxillary posterior crossbite appliance Produced rotation of the second molar and palatal traction, which nay cause occlusal Interference. That is to say, we have to escape the rotation and uncontrolled tipping creating occlusal interference when correcting buccal posterior crossbite. For this purpose, we recommend buccal traction rather than palatal traction force on the second molar.

• Journal of Oral Medicine and Pain
• /
• v.20 no.1
• /
• pp.67-77
• /
• 1995

A Case of pemphigus bulgaris in buccal mucosa of 48 years old Korean female was reported. Final diagnosis was determined by evaluation of clinical and histopathological finding. The patient could be treated successfully by administration of prednisolone, injection of bethametasone, application of oramedy and irradiation of soft laser.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.16
• /
• pp.7129-7138
• /
• 2015

Background: The polycystic ovary syndrome (PCOS), characterized by hyperandrogenism and chronic anovulation, is a common endocrine disorder in women. PCOS, which is associated with polycystic ovaries, hirsutism, obesity and insulin resistance, is a leading cause of female infertility. In this condition there is an imbalance in female sex hormones. All the sequelae symptoms of PCOS gradually lead to cancer in the course of time. It is heterogeneous disorder of unknown etiology so it is essential to find the exact cause. Materials and Methods: In this study both invasive and non-invasive techniques were employed to establish the etiology. Diagnosis was based on Rotterdam criteria (hyperandrogenism, ovulatory dysfunction, PCOM) and multiparameters using buccal samples and dermatoglypic analysis and cytogenetic study for 10 cases and four age and sex matched controls. Results: In clinical analysis we have observed the mean value of total testosterone level was 23.6nmol/L, total hirsutism score was from 12-24, facial acne was found in in 70% patients with 7-12 subcapsular follicular cysts, each measuring 2-8 mm in diameter. In dermatoglypic analysis we observed increases in mean value ($45.9^{\circ}$) of ATD angle when compared with control group and also found increased frequency (38%) of Ulnar loops on both fingers (UU), (18%) whorls on the right finger and Ulnar loop on left finger (WU) and (16%) arches on right and left fingers (AA) were observed in PCOS patients when compared with control subjects. Features which could be applied as markers for PCOS patients are the presence of Ulnar loops in middle and little fingers of right and left hand. The buccal micronucleus cytome assay in exfoliated buccal cells, we found decrease in frequency of micronuclei and significant increases in frequency of karyolysed nuclei in polycystic ovarian syndrome patients. Chromosome aberration analysis revealed a significant increase in frequency of chromosome aberrations (CAs) in PCOS patients when compared with controls. Conclusions: From this present work it can be concluded that non-invasive technique like dermatoglypics analysis and buccal micronucleus cytome assays with exfoliated buccal cell can also be effective biomarkers for PCOS, along with increased CAs in lymphocytes as a sign of genetic instability. There is a hypothesis that micronuclei and chromosomal aberrations could have a predictive value for cancer. From this present work it can be concluded to some extent that non-invasive technique like dermatoglypics and buccal cell analysis can also be effective for diagnosis.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.20 no.4
• /
• pp.203-212
• /
• 2020

Background: This research evaluated the numbness produced by lignocaine at an equal or higher concentration than that of 4% articaine through a single point of injection for maxillary third molar surgery. This randomized double-blind study was conducted to compare the anesthetic efficiency of 4% lignocaine with that of 4% articaine in impacted maxillary third molar surgery using a single buccal infiltration alone. Methods: The study participants were 30 healthy patients requiring the bilateral surgical removal of symmetrically-positioned maxillary third molars. Using a split-mouth design, each patient randomly received buccal infiltration of 1.7 ml of 4% lignocaine and 1.7 ml of 4% articaine during two separate appointments. After 15 minutes of anesthetic injection, surgery was performed by the same surgeon using a consistent technique on both sides. Pinprick test pain scores of the buccal and palatal gingiva of the maxillary third molar after 10 minutes and 15 minutes latencies, pain scores during the surgery, the need for supplemental anesthesia, and patients' satisfaction with anesthetic efficiency were recorded. Surgery performed without supplemental anesthesia was categorized as successful. Results: The success rates of 4% lignocaine and 4% articaine (83.34% vs. 86.67%, P = 1.00) were not significantly different. Only 5 cases (4 cases in the articaine group and 1 case in the lignocaine group) reported mild pain and pressure sensation (NRS ≤ 1) on probing at the palatal side after 15 minutes of latency (P = 0.25). The pain scores of maxillary third molar surgery in the two groups were not significantly different (P > 0.05). Moreover, the statistical analysis confirmed the comparable patient satisfaction of two study groups (P = 0.284). Conclusion: This study provides evidence that single buccal infiltrations of 4% lignocaine and 4% articaine have comparable anesthetic efficacy and success rates for impacted maxillary third molar surgery. Both 4% lignocaine and 4% articaine can produce effective palatal anesthesia and pain control using buccal infiltration alone after 15 minutes of latency.