• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.5
• /
• pp.386-393
• /
• 2009

Objectives: This study was performed to evaluate course of the inferior alveolar canal in the mandibular ramus and to find safety zone when ramal bone is harvested. Patients and Methods: From January, 2009 to February, 2009, the 20 patients who visited in the Department of Oral and Maxillofacial Surgery, Sanbon Dental Hospital. Wonkwang University and the Conebeam CT was taken of various chief complaints, were selected. The patients who had left and right mandibular first molar and incisor missing, jaw fracture and bone pathology were excluded. The R point was defined as the point which occlusal plane was crossed to the mandibular anterior ramus(external oblique ridge). In the cross-sectional coronal and axial views, the inferior alveolar canal position to the R point, buccal bone width(BW), alveolar crest distance(ACD), distance from alveolar crest to occlusal plane(COD) and inferior alveolar canal to sagittal plane(CS) were measured and horizontal distance(HD), vertical distance(VD) and nearest distance(ND) were measured. Results: The inferior alveolar canal is located $6.19{\pm}1.21\;mm$ from the R point. Horizontal distance from the R point were $13.07{\pm}2.45\;mm$, vertical distance from the R point were $14.24{\pm}2.41\;mm$ and nearest distance from the R point were $10.12{\pm}1.76\;mm$. The course of the inferior alveolar canal was positioned within $0.61{\pm}0.68\;mm$. The distance from external buccal bone to the inferior alveolar canal was increased from the R point anteriorly. Conclusions: It is considered that the mandibular ramus from the R point to 10 mm anteriorly can be harvested safely at ramal bone grafting.

• Journal of Oral Medicine and Pain
• /
• v.26 no.2
• /
• pp.161-171
• /
• 2001

In order to determine how oral mucosal change relates to inducing factors of burning mouth syndrome, the difference in pain perception scale and keratinization rate between burning mouth syndrome patients and normal subjects were investigated. Twenty patients (13 female, 7 male, mean age: 59 years), presenting in the Department of Oral Medicine, Chonnam National University Hospital were participated in this study. All subjects had been complaining of constant oral burning pain for more than a year, none took any strong analgesics, and none had oral mucosal lesions. Twenty volunteers (11 females, 9 males, mean age: 25 years) were also participated in this study as a control group. The control subjects had never had any symptoms of oral burning pain. A thermal stimulation using a Nd-YAG laser and cytological smear were carried out to anterodorsal part of tongue, tip of tongue, the left buccal mucosa, the lower lip mucosa and the chief complaint site. Stimulation of the dorsum of left hand was also carried out to contrast the mucosal area of burning mouth syndrome subjects and the control subjects. The laser output power could be adjusted from 0.75W to 4W. The pain perception scale of the burning mouth syndrome subjects were lower than in control subjects in the chief complaint area, the anterodorsal part of tongue and the buccal mucosa(p<0.01). The keratinization rate of burning mouth syndrome subjects, however, was higher keratinization rate than in normal subjects in the same area and lower lip mucosa(p<0.001). From above results, the anterodorsal part of tongue is the most appropriate site to use diagnostic laser stimulation. The higher level of keratinization and the lower level of thermal pain perception of the burning mouth syndrome subjects are explained as a protective mechanism against xerostomia and burning sensations. The application of Nd-YAG laser stimuli and cytological smear to oral mucosal surface could therefore be usefully employed as appropriate and standardized diagnostic tools for chronic orofacial pain subjects.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.47-58
• /
• 1998

The purpose of this study was to investigate an influence of the change of central panoramic curves on the image reconstruction in the dental implant CT. The author designed three experimental groups according to the location of central panoramic curve. In group A, central panoramic curve was determined as the curve connecting the center of roots from the first premolar to the first molar. In group B, central panoramic curve was determined as the line connecting the lingual cortical plate at the level of the mesial aspect of the first premolar with the buccal cortical plate at the level of the mesial aspect of the first molar. In Group C, central panoramic curve was determined as the line connecting the buccal cortical plate at the level of the mesial aspect of the first premolar with the lingual cortical plate at the level of the mesial aspect of the first molar. Twenty four reformatted CT images was acquired from four mandibles embedded in the resin block and twenty four contact radiographs of dog specimens were acquired. Each Image was processed under Adobe Photoshop program analysed by MSPA(mandible/maxilla shape pattern analysis) variables such as MXVD, MXHD, UHD, MHD, and LHD. The obtained results were as follows ; 1. The mean of MXVD variable was 19.9, 20.2, and 20.0 in group A, B, and C, respectively, which were smaller than actual value 20.5. But, there was no significant difference among 3 groups (p>0.05). 2. The mean of MXHD, UHD, MHD, and LHD variables in group A, B, and C was 11.9, 12.2, and 12.3; 9.3, 9.5, and 9.6; 10.0, 10.3, and 10.3; 9.2, 9.3, and 9.4 respectively which were equal to or greater than the actual value 11.8, 9.3, 10.0, and 9.2. But, there was no significant difference among 3 groups (p>0.05). 3. The number of noneffective observations with difference over or under 1 mm with comparison to the actual value was 24(20％), 58(48.3％), and 52(43.3％), respectively, in group A, B, and C. 4. In group A, the number of observations over 1 mm and under 1 mm was 9 and 15, respectively, but in group Band C, the number of observations over 1 mm was more than under 1 mm.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.680-684
• /
• 2004

The hemangioma, a benign proliferation of blood vessel, is the most common tumor of infancy and childhood. In many instances, the lesion probably represents a hamartoma or malformation rather than a true neoplasm. In the oral cavity, common sites are lips, followed by tongue, buccal mucosa and palate. Clinical characteristics appear as a flat or raised reddish-blue lesion and are generally solitary. They are classified on the basis of their histological appearance into capillary, mixed, cavernous or a sclerosing variety. A 6-year-old male of this case was referred to the Department of Pediatric Dentistry, Chonnam National University with a chief complaint of swelling lesion on gingiva. The strawberry appearance mass was detected by clinical examination on attached gingiva at the upper left primary lateral incisor and canine. Surgical excision and biopsy were carried out for histological examination and the lesion was diagnosed with a capillary hemangioma. The risk of recurrence after this therapy is rare, and there is no malignant transformation. Despite their benign origins and behaviour, hemangiomas in the region of oral cavity are always clinically important to the dental profession because of bleeding tendency.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.2
• /
• pp.98-105
• /
• 2013

The purpose of this study was to investigate the mesiodistal widths at the cervical level of primary second molars in Korean children, and to compare them with commercial rubber dam clamps commonly used in pediatric dentistry. Dental casts of 115 primary and mixed dentition children were studied. Cervical mesiodistal width (C-MD) was measured at the clinical cervical level of each primary second molar from buccal and lingual sides using a digital caliper (Absolute, Mitutoyo, Kawasaki, Japan). The data were compared with mesiodistal widths of rubber dam clamps #203/204, #10/11, and #205 (Dentech, Japan). C-MDs of primary mandibular second molars were larger than those of primary maxillary second molars, and C-MDs at buccal sides were larger than those of lingual sides. All C-MDs showed statistically significant discrepancies to corresponding widths on clamps (p < 0.05). However the amount of discrepancy was mild in maxillary teeth, while up to 1 mm of discrepancy was shown in mandibular teeth. In conclusion, C-MDs measured in this study imply a relatively fair fit of #10/#11 or #203/#204 clamps on primary maxillary second molars, while suggesting our need for a better clamp with proper size for primary mandibular second molars.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.317-324
• /
• 2008

The objective of this study was to test effects of (1) where the occlusal contact points locate on a full veneer crown, and (2) which direction the contact forces are directed to, on the stresses within the luting cement layer that might suffer microfracture. A total of 27 finite element models were created for a mandibular first molar, combining 9 different locations of the occlusal contact points and 3 different loading directions. Type 3 gold alloy was used for crown material with a chamfer margin, and the luting cement material was glass ionomer cements in uniform thickness of $75{\mu}m$. Modeled crowns were loaded at 100 N. Different patterns in the cement stress were observed in the vicinity of the buccal and lingual margins. Whereas, the peak stress in buccal margin occurred approximately 0.5 mm away from the external surface, the highest stress in lingual margin was observed at approximately 1 mm. Significantly different distribution of stresses was recorded as a function either of the location of the occlusal contact points or of the loading direction. Higher stresses were produced by more obliquely acting load, and when the loaded point was in the vicinity of the cusp tip.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.3
• /
• pp.415-430
• /
• 1996

The purpose of this study was to evaluate the stress distributions in the surrounding tissues of the teeth seated by indirect retainers in three different teeth of unilateral distal extension partial denture when the dislodging forces were applied on denture bases. Three dimensional photoelastic models were made. The teeth on which indirect retainers were seated were mandibular left lateral incisor (Model I), canine (Model II), and first premolar (Model III). The dislodging force with 860mg at $45^{\circ}$ angulation to occlusal plane was applied to each model. Three dimensional photoelastic stress analysis was done, and the records were diagramed and analysed. The results were as follows : The compressive stresses were shown the most on neck portions of buccal, mesial, and distal sides in all three models. Slight tensile stresses were shown on neck portions of lingual sides in all three models. The compressive stresses on buccal side were shown in strength in such order as model I, model II, and model III. The compressive stresses were shown on neck portion of mesial and distal sides of model I and mode II, with model I more than Model II. The compressive stresses were shown only on neck portion of mesial side on Model III. The general overall magnitude of compressive stresses were shown in strength in such order as Model I, Model II, and Model III.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.22 no.5
• /
• pp.339-348
• /
• 2022

Background: To compare the anesthetic efficacy of supplemental buccal infiltration (BI) (1.7 ml) versus intraligamentary (IL) injection containing 0.4 ml of 4% articaine with 1:100.000 epinephrine after an inferior alveolar nerve block (IANB) with 1.7 ml 2% lidocaine in the first and second mandibular molars diagnosed with irreversible pulpitis (IP). Methods: One hundred subjects diagnosed with IP of either the mandibular first (n = 50) or second molars (n = 50) and failed profound anesthesia following an IANB were selected. They randomly received either the IL or BI techniques of anesthesia. Pain scores on a 170 mm Heft-Parker visual analog scale were recorded initially, before, and during supplemental injections. Furthermore, pulse rate was measured before and after each supplemental injection. During the access cavity preparation and initial filing, no or mild pain was assumed to indicate anesthetic success. The chi-square test, Mann-Whitney U test, and independent samples t-test were used for the analyses. Results: The overall success rates were 80% in the IL group and 74% in the BI group, with no significant difference (P = 0.63). In the first molars, there was no significant difference between the two techniques (P = 0.088). In the second molars, IL injection resulted in a significantly higher success rate (P = 0.017) than BI. IL injection was statistically more successful (P = 0.034) in the second molars (92%) than in the first molars (68%). However, BI was significantly more successful (P = 0.047) in the first molars (88%) than in the second molars (64%). The mean pulse rate increase was significantly higher in the IL group than in the BI group (P < 0.001). Conclusions: Both the IL and BI techniques were advantageous when used as supplemental injections. However, more favorable outcomes were observed when the second molars received IL injection and the first molars received BI.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.4
• /
• pp.283-309
• /
• 2021

Achieving profound anesthesia in mandibular molars with irreversible pulpitis is a tedious task. This review aimed at evaluating the success of buccal/lingual infiltrations administered with a primary inferior alveolar nerve block (IANB) injection or as a supplemental injection after the failure of the primary injection in symptomatic and asymptomatic patients with irreversible pulpitis in human mandibular molars. The review question was "What will be the success of primary and supplemental infiltration injection in the endodontic treatment of patients with irreversible pulpitis in human mandibular molars?" We searched electronic databases, including Pubmed, Scopus, and Ebsco host and we did a comprehensive manual search. The review protocol was framed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) checklist. We included clinical studies that evaluated and compared the anesthetic outcomes of primary IANB with primary and/or supplementary infiltration injections. Standard evaluation of the included studies was performed and suitable data and inferences were assessed. Twenty-six studies were included, of which 13 were selected for the meta-analysis. In the forest plot representation of the studies evaluating infiltrations, the combined risk ratio (RR) was 1.88 (95% CI: 1.49, 2.37), in favor of the secondary infiltrations with a statistical heterogeneity of 77%. The forest plot analysis for studies comparing primary IANB + infiltration versus primary IANB alone showed a low heterogeneity (0%). The included studies had similar RRs and the combined RR was 1.84 (95% CI: 1.44, 2.34). These findings suggest that supplemental infiltrations given along with a primary IANB provide a better success rate. L'Abbe plots were generated to measure the statistical heterogeneity among the studies. Trial sequential analysis suggested that the number of patients included in the analysis was adequate. Based on the qualitative and quantitative analyses, we concluded that the infiltration technique, either as a primary injection or as a supplementary injection, given after the failure of primary IANB, increases the overall anesthetic efficacy.

• Imaging Science in Dentistry
• /
• v.52 no.3
• /
• pp.267-273
• /
• 2022

Purpose: The aim of this study was to assess the influence of kilovoltage- peak (kVp) and the metal artifact reduction (MAR) tool on the detection of buccal and lingual peri-implant dehiscence in the presence of titanium-zirconia (Ti-Zr) and zirconia (Zr) implants in cone-beam computed tomography (CBCT) images. Materials and Methods: Twenty implant sites were created in the posterior region of human mandibles, including control sites (without dehiscence) and experimental sites (with dehiscence). Individually, a Ti-Zr or Zr implant was placed in each implant site. CBCT scans were performed using a Picasso Trio device, with variation in the kVp setting (70 or 90 kVp) and whether the MAR tool was used. Three oral radiologists scored the detection of dehiscence using a 5-point scale. The area under the receiver operating characteristic (ROC) curve, sensitivity, and specificity were calculated and compared by multi-way analysis of variance (α=0.05). Results: The kVp, cortical plate involved (buccal or lingual cortices), and MAR did not influence any diagnostic values (P>0.05). The material of the implant did not influence the ROC curve values(P>0.05). In contrast, the sensitivity and specificity were statistically significantly influenced by the implant material (P<0.05) with Zr implants showing higher sensitivity values and lower specificity values than Ti-Zr implants. Conclusion: The detection of peri-implant dehiscence was not influenced by kVp, use of the MAR tool, or the cortical plate. Greater sensitivity and lower specificity were shown for the detection of peri-implant dehiscence in the presence of a Zr implant.