• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.3
• /
• pp.416-427
• /
• 2024

The wake-homing underwater guided weapon that detects and tracks wake generated during voyage of a surface ship is impossible to avoid with the present acoustic deception torpedo defense system. Therefore, research on bubble-generating wake decoy is necessary to deceive wake-homing underwater guided weapon. Experiments in various environments are required to verify the effective operation method and performance of the wake decoy, but performance verification through underwater experiment is limited. In this paper, we develop a simulator for an torpedo defense system of surface ship, which is applied bubble-generating wake decoy, against acoustic, wake, and hybrid homing underwater guided weapon attack. The simulator includes surface ship model, acoustic decoy(static, mobile) model, bubble-generating wake decoy model, search and motion model of underwater guided weapon and so on. By integrating various models, MATLAB GUI simulator was developed. Through the simulation results for various environmental variables by this simulator, it is judged that effective operation method and performance verification of the bubble-generating wake decoy can be performed.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1010-1015
• /
• 2003

Bubble growth on microheater has been experimentally investigated in this study. The experiment was performed using platinum microheaters having dimensions of 300 ${\mu}m$ or 50 ${\mu}m$ in length, 20 ${\mu}m$ or 5 ${\mu}m$ in width, and $0.2{\pm}0.01$ ${\mu}m$ in thickness. A high speed video camera was used to observe bubble growth at 2,000 frames per second. Microheater temperature was measured at the rate of 300 Hz. with a data acquisition system. Bubble nucleation frequency increased with working fluid temperature. Although the slope of temperature drop was similar in all cases, the magnitude of temperature drop was different. The temperature profiles and the high speed camera images were combined to explain temperature drop.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.223-224
• /
• 2023

This study compared the curing temperature of the bubble sheet and the photothermal insulation sheet incorporating carbon-based photothermal materials to reduce concrete curing time as a part of shortening construction period. As a result of the experiment, bubble sheet with photothermal material B is judged to be effective in shortening the curing time under hot environment.

• International Journal of Advanced Culture Technology
• /
• v.8 no.3
• /
• pp.284-290
• /
• 2020

In this paper, we propose a method to generate and optimize the height map that is suitable to render a soap bubble. The height map represents the flow speed of soap bubbles. To this end, we have analyzed the flow of the soap bubble surface through experiment, derived the moving speed value for each section. Some image filters have been used for optimization that reflects the parameters of the derived height map. In addition, in order to verify the results of the study, actual data measuring the surface flow speed of soap bubbles, the speed of the initial height map, and the optimized height map speed have been compared and tested. Through this study, we reach the issue that it is possible to express the variable flow speed of soap bubbles with the optimized height map, and it will help to express various fluids.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.9
• /
• pp.787-792
• /
• 2015

Recently, 3D printing technology is a hot issue in various industrial fields. According to the user's application, it allows for the free form fabrication method to be utilized in a wide range. The powder based fusion technique is one of the 3D printing methods. When using this method it is possible to apply the various binder jetting techniques such as piezo, thermal bubble jet, dispenser and so on. In this paper, a multi thermal bubble ink jet was integrated for jetting of powder binding material and developing a power fused 3D printing system. For high quality 3D printing parts, it needs an analysis and evaluation of the behavior of the thermal bubble ink jet head. In the experiment, a correlation between jetting binder quantity and layer thickness of powder was investigated, and a 3D part model was fabricated, which was used by measuring the scale factor.

• Wind and Structures
• /
• v.19 no.2
• /
• pp.113-144
• /
• 2014

Separation bubble and conical vortices on a large-span flat roof were observed in this study through the use of flow visualization. The results indicated that separation bubble occurred when the flow was normal to the leading edge of the flat roof. Conical vortices that occur under the cornering flow were observed near the leading edge, and their appearance was influenced by the wind angle. When the wind changed from along the diagonal to deviating from the diagonal of the roof, the conical vortex close to the approaching flow changed from circular to be more oblong shaped. Based on the measured velocities in the conical vortices by flow visualization, a proposed two-dimensional vortex model was improved and validated by simplifying the velocity profile between the vortex and the potential flow region. Through measured velocities and parameters of vortices, the intensities of conical vortices and separation bubble on a large-span flat roof under different wind directions were provided. The quasi-steady theory was corrected by including the effect of vortices. With this improved two-dimensional vortex model and the corrected quasi-steady theory, the mean and peak suction beneath the cores of the conical vortices and separation bubble can be predicted, and these were verified by measured pressures on a larger-scale model of the flat roof.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.169-170
• /
• 2023

In this study, light-heat generating materials were produced in two ways, and the performance of two light-generating insulation sheets was reviewed. As a result of the experiment, it was possible to confirm the improved heating performance of the light heating insulation sheet compared to the existing bubble sheet. The light heat insulation sheet (b) showed improved thermal properties compared to the existing bubble sheet, and it is believed that the temperature has increased due to the combined effect of initial hydration heat and heat generation after installation. In future studies additional experiments are needed to compensate for the insufficient insulation performance due to the single bubble sheet through the double bubble sheet and to adjust the amount of light-generating materials added as a consideration of the optimal heat-generating effect of the light-generating insulation sheet (b).

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.624-635
• /
• 2024

In two-fluid simulations of flow boiling, the modeling of the mean bubble diameter is a key parameter in the closure relations governing the intefacial transfer of mass, momentum, and energy. Monodispersed approach proved to be insufficient to describe the significant variation in bubble size during flow boiling in a heated pipe. A population balance model (PBM) has been employed to address these shortcomings. During nucleate boiling, vapor bubbles of a certain size are formed on the heated wall, detach and migrate into the bulk flow. These bubbles then grow, shrink or disintegrate by evaporation, condensation, breakage and aggregation. In this study, a parametric analysis of the PBM aggregation and breakage models has been performed to investigate their effect on the radial distribution of the mean bubble diameter and vapor volume fraction. The simulation results are compared with the DEBORA experiments (Garnier et al., 2001). In addition, the influence of PBM parameters on the local distribution of individual bubble size groups was also studied. The results have shown that the modeling of aggregation process has the largest influence on the results and is mainly dictated by the collisions due to flow turbulence.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.1
• /
• pp.19-26
• /
• 2014

The purpose of this study was to investigate the human body effect according to micro bubble and LED lighting in half body bathing. This study was conducted on 6 elderly male and 7 female in 70's, and the subjects were classified into half body bathing with the micro bubble group (3 male, 4 female) and without the micro bubble group (3 male, 3 female) to proceed to the experiment. Experiments were performed 4 times by changing the LED lighting colors. As a result, parasympathetic nerves were activated than sympathetic nerves (micro bubble stimulation : 21.41%) and the temperature of the body were increased by $5.93^{\circ}C$ with micro bubble and red lighting stimulation. It is considered that this work will help to utilize the half body bathing system for the micro bubble and LED lighting.

• Journal of Power System Engineering
• /
• v.18 no.4
• /
• pp.23-28
• /
• 2014

In order to increase the performance of conventional hot water floor heating system, the bubble jet loop heat pipe for the system was developed. This experiment was conducted under next conditions : Working fluid was R-134a, charging ratio was 50%. A temperature of hot water, room temperature and flow rate were $60^{\circ}C$, $15^{\circ}C$ and 0.5~1.5 kg/min, respectively. The experimental results, show that bubble jet loop heat pipe had a high effective thermal conductivity of $4714kW/m^{\circ}C$ and a sufficient heat flux of $73W/m^2$ to heat the floor to $35^{\circ}C$ in case of the 1.5 kg/min of flow rate. So the bubble jet loop heat pipe has a possibility for appling of the floor heating system. Additionally, the visualization of bubble jet loop heat pipe was performed to understand the operating principle. Bubbles made by the narrow gap between inner tube and outer tube of evaporating part generate pulsation at liquid surface of working fluid. The pulsation had slug flow and wavy flow. So working fluid circulates in the bubble jet loop heat pipe as two phase flow pattern. And large amount of heat is transferred by the latent heat from evaporating part to condensing part.