• 제목/요약/키워드: Bubble experiment

검색결과 163건 처리시간 0.024초

선체주위 기포거동에 관한 기초적 연구 (A Basic Research of Air Bubble Locus around the Ship Hull)

  • 김호은;이영길
    • 대한조선학회논문집
    • /
    • 제37권4호
    • /
    • pp.48-55
    • /
    • 2000
  • 선박의 저항을 줄이기 위하여 발생시킨 기포의 거동을 알기 위해, 선체주위의 기포거동에 과한 기초적 연구를 수행하였다. 본 연구에서는 선체주위에 발생된 기포의 거동에 대하여, 기포의 크기와 발생위치를 변화시켜가며 수치계산 및 실험을 수행하여, 선체주위의 기포거동에 관한 특성을 연구하고자 하였다. 기포의 거동방정식은 기포의 부력을 고려한 Kawakita의 것을 사용하였다. 수치계산은 MAC(Marker And Cell)법을 기초로 한 유한차분법(Finite Difference Method)을 사용하였으며, 실험은 Series 60선형에 대하여 회류수조에서 수행되었다. 실험과 계산은 서로 비교하여 보았다.

  • PDF

글라스 버블을 사용한 자기 충전 콘크리트의 레올로지 특성에 관한 연구 (Study on Rheological Characteristics of Self-Compacting Concrete using Glass Bubble)

  • 이한용;윤섭;서태석
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 추계 학술논문 발표대회
    • /
    • pp.73-74
    • /
    • 2017
  • In this study, unlike high flowing concrete, using glass bubble to develop self-compacting concrete(hereinafter referred to as "SCC") with excellent filler performance by evaluating both flowability and yield stress, viscosity An experiment was conducted. Experimental results show that when 1 kg of glass bubbles are used, it is effective in stabilizing the physical properties of concrete, reducing the yield stress and viscosity.

  • PDF

단열양생시트 종류 변화에 따른 한중콘크리트의 온도이력 (Temperature History of Concrete at Cold Weather Depending on the Kinds of Insulating Sheet)

  • 전충근;김종;신동안;오선교;한천구
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
    • /
    • pp.618-621
    • /
    • 2006
  • This paper is to investigate temperature history of cold weather concrete depending on insulation curing sheet kinds. Insulating effect according to curing sheet is shown in order of 5 layer bubble sheet, combination of PE form and 3 layer bubble sheet and 3 layer bubble sheet. It maintained above $10^{\circ}C$ of minimum temperature until the completion of initial curing period when bubble curing sheet was supplied regardless of curing sheet kinds. Five layer bubble curing sheet secure higher curing temperature than any other curing sheet applied in this experiment by as much as $2{\sim}3^{\circ}C$, which performed remarkable insulation effect. Concrete applied with curing sheet secured above $65^{\circ}D{\cdot}D$ of maturity, at which concrete had 5MPa of compressive strength at 3 days.

  • PDF

아질산칼슘과 탄산나노버블수를 사용한 모르타르의 성능 평가 (The Performance Evaluation of Mortar Using Calcium Nitrite and CO2 Nano-Bubble Water)

  • 김호진;김진성;최형길
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2020년도 가을 학술논문 발표대회
    • /
    • pp.145-146
    • /
    • 2020
  • This study investigated the performance evaluation of polymer cement mortar for repairing concrete structures using calcium nitrite(Ca(NO2)2) and CO2 nano-bubble mixing water to develop section-restoration methods for the repair and reinforcement of cracks. The evaluation items were strength and microstructure analysis at 28 days of age according to the change in the amount of calcium nitrite and the use of CO2 nano-bubble water. As a result of the experiment, it was confirmed that the performance of polymer cement mortar for repairing concrete structures was improved by the generation of nitrite-based hydration products when calcium nitrite and CO2 nano-bubble water were used.

  • PDF

탄소계 광발열 소재 혼입 버블시트를 적용한 콘크리트의 양생온도 특성 (Curing Temperature of Concrete Using Bubble Sheet with Carbon-based Photothermal Materials)

  • 이승민;이현직;백성진;한준희;김종;한민철
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2023년도 가을학술발표대회논문집
    • /
    • pp.45-46
    • /
    • 2023
  • This study examined the curing temperature of concrete with a photothermal insulation sheet to shorten the curing time of concrete as part of construction cost and period reduction. According to the experiment results, the heating performance effect is confirmed through the temperature difference between photothermal insulation sheet and bubble sheet. And it has a high curing temperature in the order of bubble sheet (photo heating material B) > bubble sheet (photo heating material A) > bubble sheet on same layers.

  • PDF

유압관로에서의 캐비테이션 초생 (Cavitation Inception in Oil Hydraulic Pipeline)

  • 정용길
    • 수산해양기술연구
    • /
    • 제23권3호
    • /
    • pp.17-17
    • /
    • 1987
  • 유압관로에서의 캐비테이션 발생 기구를 조사할 목적으로, 과도흐름에 수반하여 발생하는 캐비테이션 초생에 관한 실험 및 압력이 급강하 할 때의 기포 성장에 대한 계산을 행하였다. 실험에서 얻은 결과를 기초로 한 계산에서, 작동유가 절대압 영이하의 부압에 노출되어도 캐비테이션이 발생하지 않을 정도의 장력을 갖기 위해서는 소위 말하는 기포(기포 주위의 액체가 연속체로 간주될 수 있을 정도의 크기를 갖는 기포)가 유중에 존재할 가능성은 거의 없음이 입증되었다.

다양한 생물반응기 형태가 인삼(Panax ginseng C.A. Meyer) 부정근의 생장과 Ginsenoside 생산에 미치는 영향 (Effects of Various Bioreactors on Growth and Ginsenoside Accumulation in Ginseng Adventitious Root Cultures(Panax ginseng C.A. Meyer))

  • 김윤수;한은주;백기엽
    • Journal of Plant Biotechnology
    • /
    • 제31권3호
    • /
    • pp.249-253
    • /
    • 2004
  • 생물반응기의 형태에 따른 인삼부정근의 생장과 ginsen-side의 생산능력에 대하여 조사한 결과, 원형의 상부와 하부에 5 cm의 bubble column을 가진 bulb type bubble bioreactor (BU)에서 건물중은 41.92 g으로 가장 많이 증가하였으며, cylindric tube bioreactor (CT)에서 건물중이 38.55g으로 가장 낮게 나타났다. 이들 두 생물반응기의 초기 kLa 값은 BU 생물반응기에서 6.98 h$^{-1}$로 가장 높게 측정되었고, 반대로 bubble column이 없는 CT 생물반응기에서 5.25 h$^{-1}$으로 가장 낮게 측정되었다. 그러나 이와 같은 초기 kLa값의 차이는 부정근내의 이차대사산물인 ginsenoside의 함량에는 영향을 주지 않는 것으로 나타났다. 또한 BU 생물반응기에서 bubble column의 길이를 기존의 5 cm에서 10 cm로 연장시켰을 때, 초기 kLa값이 6.52 h$^{-1}$에서 7.80 h$^{-1}$로 증가하면서 인삼부정근의 생장을 42.13 g에서 50.30 g으로 약 16% 증가시킨 것으로 나타났다.

균일전기장에 의한 기포와 액적의 변형에 관한 연구 (A study on the deformation of a bubble and a drop in a uniform electric field)

  • 권영철;김무환;강인석;조혜정;김석준
    • 대한기계학회논문집B
    • /
    • 제20권6호
    • /
    • pp.2023-2035
    • /
    • 1996
  • In the present study, the characteristics of the electrical deformation of a bubble and a drop under a uniform electric field have been investigated to understand EHD heat transfer enhancement by an electric field. The deformation of the bubble and the drop have been studied theoretically using an electric normal stress acting on their interfaces and assured by the numerical analysis and the experiment. From the variation of bubble volume and free energy, it is found that a bubble is compressed in an electric field and free energy had larger value with increasing W and the permittivity of a dielectric fluid. The electric normal stress induced on the interface of the bubble and the drop is different. Because of the surface charge induced at the drop interface, the electric normal stress acting on the drop is much larger than that of the bubble. The drop is, therefore, deformed much more than the bubble. In addition, the experimental and numerical results show that the aspect ratio and the contact angle of the bubble increase with increasing W.

해양에서의 수중소음원으로서 기포군의 집단운동 (Collective Oscillations of a Bubble Cloud as a Source of Underwater Ambient Noise in the Ocean)

  • 윤석왕;박광준
    • 한국음향학회지
    • /
    • 제10권1호
    • /
    • pp.47-51
    • /
    • 1991
  • 해양에서의 비, 바람, 파도 등 표층교란에 의해 수중에 형성되는 기포층은 수 미터 깊이까지 이르며, 이 기포층은 수중 소음을 발생시킬 수 있는 물리적 역학 매체로서 역할이 가능하다. 실험실에서 수중에 기포군을 형성하여 이에 의한 발생소음을 추적하므로 개개 기포들의 기포군 집단운동에서의 역할을 밝혔으며, 이론적 예측과 실측 기포집단의 모드 진동수가 매우 잘 일치함을 보였다. 이상의 분석결과, 수중 기포군의 집단운동이 수 백 hertz 영역의 수중 소음의 주된 소음원이 될 수 있음을 입증하였다.

  • PDF