• 제목/요약/키워드: Bromodichloromethane

검색결과 17건 처리시간 0.021초

수영장 욕조수의 소독방법에 따른 THMs 발생 특성 (The Characteristics of THMs Production by Different Disinfection Methods in Swimming Pools Water)

  • 이진;하광태;조경덕
    • 한국환경보건학회지
    • /
    • 제32권2호
    • /
    • pp.171-178
    • /
    • 2006
  • The objectives of this study were to investigate the formation of trihalomethanes(THMs) and to compare the concentration level of THMs of swimming pools water by different disinfection methods such as chlorine, ozone-chlorine, and salt brine electrolysis generator (SBEG). The concentration of chloroform was the highest in the chlorine system, and the SBEG was the highest in the production of bromodichloromethane (BDCM), dibromochloromethane (DBCM) and bromoform. The average concentration of total trihalomethanes (TTHMs) in three disinfection systems were $64.5{\pm}27.4mg/l(SBEG),\;43.8{\pm}22.3mg/l(chlorine)$, and $30.6{\pm}16.1mg/l(ozone-chlorine)$, respectively. In chlorine and ozone-chlorine disinfection system, chloroform concentration was highest, followed by BDCN, then DBCM. In the SBEG, TTHMs was composed of 42% of chloroform, 28.9% of bromoform, 15.1% of BDCM and 14% of DBCM, respectively. The strongest correlation was obtained in the levels of chloroform and TTHMs in chlorine, and ozone-chlorine disinfection systems from both indoor and outdoor swimming pools ($r=0.989{\sim}0.999$, p<0.01). In the SBEG, the levels of BDCM and TTHMs showed a good correlation (r=0.913, p<0.01). In chlorine and ozone-chlorine disinfection systems at indoor swimming pools, pH, TOC and $KMnO_4$ consumption showed strong correlation with chloroform and TTHMs concentrations (p<0.01). In the SBEG, pH and TOC were also strongly correlated with chloroform (p<0.01). pH and TTHMs were correlated as well (p<0.05).

음용수 중 소독부산물 발생현황에 관한 연구 (Assessment of Disinfection By-Products in Drinking Water in Korea)

  • 신동천;정용;최윤호;김준성;박연신;금희정;전희경
    • Environmental Analysis Health and Toxicology
    • /
    • 제16권1호
    • /
    • pp.1-8
    • /
    • 2001
  • The main purpose of applying the chlorination process during water treatment is for disinfection. Research results, however, indicate that disinfection by-products including trihalomethanes, haloacetic acids, haloacetonitriles, haloketones, and chloropicrin can be produced by chlorination process. Some of these disinfection by-products are known to be potential human carcinogens. This three-year project is designed to establish a standard analysis procedure for disinfection by-products in drinking water and investigate the distribution and sources of specific disinfection by-products. The occurrence level of DBPs in drinking water was below 50$\mu\textrm{g}$/L in most cases. THMs in plant effluent accounted for 48% of all DBPs measured, whereas HAAs accounted for 24%, HANs 14%, haloketones 5%, chloral hydrate 7%, and chloropicrin 2%. Chloroform was found to be the major THMs compound (71%), followed by bromodichloromethane (21%), dibro-mochloromethane (7%), and bromoform (3%), The concentration of DBPs formed in distribution systems increased from those detected in plant effluent. Results would play an important role in exposure assessment as a part of the risk assessment process, and would give basic information for establishment of disinfection by-products reduction and management procedures.

  • PDF

THMs, HAAs의 종분포 (Speciation of THMs, HAAs)

  • 김진근
    • 대한환경공학회지
    • /
    • 제28권11호
    • /
    • pp.1135-1140
    • /
    • 2006
  • 국내 정수장에서 염소소독시 발생하는 소독부산물인 트리할로메탄(THMs), 할로아세틱에시드(HAAs)의 발생농도와 각각의 종별 분포현황을 조사하였다. 조사대상은 일반적인 정수처리공정으로 구성된 한강, 금강, 섬진강, 낙동강 수계의 1개 정수장씩 총 4개소였다. THMs의 발생농도는 평균 26.9 ppb, 최대 46.7 ppb, 최소 11.0 ppb였으며, $HAA_5$의 발생농도는 평균 25.4 ppb, 최대 57.1 ppb, 최소 9.7 ppb였다. 계절적으로는 동절기에 농도가 낮았고 하절기에 높았다. THMs의 종별 분포를 조사한 결과 클로로포름의 비율이 평균 77%로 가장 높았고 다음으로는 브로모디클로로메탄(20%)이 높게 검출되었으며, 브로모포름의 농도는 정량한계 미만이었다. $HAA_5$의 경우 디클로로아세틱에시드(DCAA)와 트리클로로아세틱에시드(TCAA)의 합이 $HAA_5$의 97%를 차지하는 것으로 조사되었다. 그러나 한강수계의 경우는 이 비율이 평균 90%로 다소 낮았으며, 특히 겨울철에 비율이 가장 낮았다. 한편, 하절기를 제외하고는 DCAA가 TCAA보다 높은 것으로 조사되었다.

조리시 가열에 따른 수돗물 중 염소소독부산물의 농도 변화와 인체 섭취 노출 (Changes in the Concentrations of the Tap Water Chlorination By-Products by Heating during Cooking, and Human Ingestion Exposure)

  • 김희갑;이수형
    • Environmental Analysis Health and Toxicology
    • /
    • 제14권1_2호
    • /
    • pp.35-43
    • /
    • 1999
  • A number of disinfection by-products (DBPs) are formed as a result of the addition of chlorine into the public water supply and some of them have been suggested to cause adverse health effects on humans. However, the estimation of human ingestion exposure to each DBP has been performed simply by multiplying the concentration of a chemical in the cold tap water by the volume of water consumed during a given period of time. However, a questionnaire concerning water consumptions administered to sixty people residing in Chunchon showed that the volume of tap water consumed accounted for approximately 70% of the total volume of water consumed and that of heated water represented approximately 94% of tap water ingested. Heating durations for water-containing foods (e. g., soups and pot stews) and heated beverages (e. g., barley tea) were grouped into 10, 20, 30, and 35 minutes. Based on these time frames, an aluminum pot containing one liter of tap water was heated for the above respective time periods using a gas range to determine the variations of the concentrations of individual DBPs by heating. The pH and total residual chlorine were measured before and after heating. Collected water samples were carried to the laboratory and analyzed for eight DBPs and total organic carbon. Chloroform, bromodichloromethane, chloral hydrate, 1, 2-dichloro-2-propanone, 1, 1, 1-trichloropropanone, and dichloroacetonitrile were not detected following heating for 10 minutes and longer. The concentration of dichloroacetic acid (DCAA) was elevated with heating duration, resulting in the averages of 2.0, 3.1, 4.7, and 12 times the initial concentration, respectively, for 10, 20, 30, and 35 minute heating periods. On the other hand, the concentration of trichloroacetic acid (TCAA) decreased with heating duration, with 0.65, 0.40, 0.34, and 0.19 times lower than the initial concentration. Therefore, it is suggested that ingestion exposure to DCAA increases with heating duration but that ingestion exposure to TCAA decreases. In addition, while the amount of DCAA was elevated at the initial time periods (10 or 20 minutes) and then slowly decreased, that of TCAA was rapidly decreased. In conclusion, water-heating processes during cooking influence the concentrations of individual DBPs in the tap water, with lower levels for volatile DBPs and TCAA, and higher levels for DCAA. Therefore, concentration change needs to be taken into consideration in the estimation of human ingestion exposure to DBPs.

  • PDF

입상활성탄 주기적 누적충진에 따른 용존유기탄소와 THMs 처리능 평가 (Evaluation of Treatability on DOC and THMs According to Periodic Cumulative Filling of Granular Activated Carbon (GAC))

  • 손희종;김상구;서창동;염훈식;류동춘
    • 대한환경공학회지
    • /
    • 제39권9호
    • /
    • pp.513-518
    • /
    • 2017
  • 본 연구는 입상활성탄을 일시에 100% 충진하는 방법과 일회 충진양을 50%, 33%, 20% 및 10%로 나눠서 주기적으로 누적 충진하였을 경우에 대해 THMs과 DOC 처리효율 변화를 비교 평가하기 위해 수행하였다. 일시에 100% 충진하는 방법은 운전 초기에는 THMs와 DOC의 유출농도가 낮았으나 운전기간이 증가할수록 높은 유출수 농도를 나타내었다. 반면 주기적 누적충진 방법을 적용한 경우에는 유출수의 THMs와 DOC 농도가 운전기간 동안 상대적으로 균등하게 유지하였다. THMs 흡착제거에는 주기적 누적 충진법이 전체 충진용량을 일시에 충진하는 방법에 비해 효과적이었으나, 활성탄 공정 유입수 THMs 구성종들 중에서 클로로디브로모메탄이나 브로모포름의 함량이 클로로포름이나 브로모디클로로메탄에 비해 월등히 높은 경우에는 주기적 누적충진법에 비해 전체 충진용량을 일시에 충진하는 방법이 더욱 효과적인 것으로 나타났다. DOC의 제거에서는 충진용량을 일시에 충진하여 운전하는 방법이 주기적 누적충진법에 비해 DOC의 총 흡착량과 유출수의 평균농도 측면에서는 유리하였다. 활성탄 공정 운전기간 동안 THMs와 DOC 제거율의 균등화에는 주기적 누적충진 방법을 적용한 경우가 효과적이었고, 적은 양의 활성탄을 주기적으로 자주 충진하는 방식이 더욱 유리하였다.

전구물질의 소수성 및 친수성 특성에 따른 트리할로메탄의 생성과 제거에 관한 연구 (Formation and Removal of Trihalomethanes based on Characterization of Hydrophobic and Hydrophilic Precursors)

  • 전희경;김준성;최윤찬;최해연;정용
    • 한국물환경학회지
    • /
    • 제24권1호
    • /
    • pp.123-128
    • /
    • 2008
  • The Dissolved Organic Carbon (DOC) existing in a water includes both hydrophobic and hydrophilic substances however, most of the discussion focuses on hydrophobic substances. The hydrophobic fraction was easily removed by absorption or coagulation more than hydrophilic fraction. Therefore, control of the hydrophilic fraction is very important in water treatment process. This study is to determine the variation of DOC, the removal efficiency of DOC, and Trihalomethane formation potential (THMFP) after each stage of water treatment process by fractionating Natural Organic Matters (NOM) into hydrophobic and hydrophilic substance. DOC from raw water was fractionated at acidic pH (pH<2) using XAD 8 resin column, into two fraction : hydrophobic substance (i.e. humic substance) adsorbed on XAD 8 and hydrophilic substance which represent the organics contained in the final effluent. THMFP was carried out according to the following set condition: Cl2/DOC=4 mg/mg, incubation at $25^{\circ}C$ in darkness, pH 7 adjust with HCl or NaOH as necessary, and 72hour-contact time. THMs analyzed in this study were chloroform, bromodichloromethane, dibromochloromethan, and bromoform. Sewage was almost evenly split between the hydrophobic (56%) and hydrophilic fraction (44%). But, Aldrich humic substance (AHS) was found to contain less hydrophilics (14%) than hydrophobics (86%). The formation of THMs may depend on the source which is characterized by the composition of organic matters such as AHS and sewage. The THMFP yield of sewage and AHS were assessed as follows. The value of the THMFP reaction yield, AHS $172.65{\mu}g/mg$, is much higher than that of sewage $41.68{\mu}g/mg$. This illustrates possible significant difference in THMFP according to the component type and the proportion of organic matter existing in water source. Apparently AHS react with chlorine to produce more THMFP than do the smaller molecules found in sewage. Water treatment process may reduce THMFP, nevertheless residual DOC (the more hydrophilic substance) has significant THMFP. Further reduction in organic halide precursors requires application of alternative treatment techniques.

일개 실내수영장의 공기 중 염소 및 트리할로메탄의 노출평가 및 환기 효율 평가 (Assessment for Inhalation Exposure to Trihalomethanes (THMs) and Chroline and Efficiency of Ventilation for an Indoor Swimming Pool)

  • 박해동;박현희;신정아;김태호
    • 한국환경보건학회지
    • /
    • 제36권5호
    • /
    • pp.402-410
    • /
    • 2010
  • The objectives of this study were to evaluate the air quality surrounding an indoor swimming pool, to estimate the cancer risk based on the airborne exposure to trihalomethanes (THMs), and to examine the ventilation efficiency by Computational Fluid Dynamics (CFD). Chlorine and THMs were measured poolside, and in the staff room and reception area. The indoor swimming pool was modeled using the Airpak program, with ventilation drawings and actual survey data. Temperature, flow and mean age of the air were analyzed. Levels of chlorine poolside, and in the staff room, and reception area were $203\;{\mu}g/m^3$, $5\;{\mu}g/m^3$, and $10\;{\mu}g/m^3$, respectively. Chloroform was the dominant THM in all sampling sites and mean concentrations were $16.30\;{\mu}g/m^3$, $0.51\;{\mu}g/m^3$, and $0.06\;{\mu}g/m^3$ poolside, in the staff room and reception area, respectively. Bromodichloromethane and Dibromochloromethane levels were respectively estimated as $10.3\;{\mu}g/m^3$ and $1.7\;{\mu}g/m^3$ poolside, $1.3\;{\mu}g/m^3$ and $0.1\;{\mu}g/m^3$ in the staff room, and were not detected in the reception area. The cancer risks from inhalation exposure to THMs were estimated between $3.37{\times}10^{-7}$ and $1.84{\times}10^{-5}$. A short circulation phenomenon was observed from the supply air vents to the exhaust air vents located in the ceiling. A high temperature layer was formed within one meter of the ceiling, and a low temperature layer was formed under this layer due to the low velocity and high temperature of the supply air, and the improper locations of the supply air vents and exhaust air vents. The stagnation was evident at the above adult pool and the mean age of the air was 22 minutes. Disinfection by-products in the indoor swimming pool were present in higher concentrations than in the outdoor air. In order to increase the removal of pollutants, adjustment was required of the supply air volume and the supply/exhaust position.