• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.90-95
• /
• 2015

This paper describes IEC 61727 standard of Photovoltaic (PV) systems -Characteristics of the utility interface. IEC 61727 standard tests include utility compatibility and personnel safety and equipment protection of PV inverter performance functions. Especially utility compatibility part includes test items of 1) voltage, current and frequency, 2) normal voltage operating range, 3) flicker, 4) DC injection, 5) normal frequency operating range, 6) harmonics and 7) waveform distortion, 8) power factor of PV inverter. Also personnel safety and equipment protection part includes test items 1)loss of utility voltage, 2)over/under voltage and frequency, 3)Islanding protection, 4)response to utility recovery, 5)earthing, 6)short circuit protection, 7)Isolation and switching of PV inverter. In this paper, each item of IEC 61727 standard test is studied and analyzed and finally full tested by PV inverter performance function.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.965-968
• /
• 2011

A 1.485-Gbit/s video signal transmission system at carrier frequencies of 240 GHz and 300 GHz was implemented and demonstrated. The radio frequency front-ends are composed of Schottky barrier diode subharmonic mixers (SHMs), frequency triplers, and diagonal horn antennas for the transmitter and receiver. Amplitude shift keying with an intermediate frequency of 5.94 GHz was utilized as the modulation scheme. A 1.485-Gbit/s video signal with a high-definition serial digital interface format was successfully transmitted over a wireless link distance of 4.2 m and displayed on an HDTV with a transmitted average output power of 20 ${\mu}W$ at a 300-GHz system.

• Journal of Broadcast Engineering
• /
• v.13 no.4
• /
• pp.463-478
• /
• 2008

A Distributed Translator Network(DTxR) is a cost-effective and frequency-effective method which can use existing transmission utilities and can be constructed in a shorter time as compared with Multiple Frequency Network(MFN) or Single Frequency Network(SFN) using On Channel Repeater(OCR). In order to verify the feasibility of DTxR, this field test was done in 30 points of north-west area in Seoul using 3rd, 5th, and 6th generation DIV receivers. Electric field strength, noise margin and ease of reception were measured and subjective evaluation of video quality was done in these points during the field test. With the test result, an improvement of receiving quality was obtained and an ease of reception was increased in case of the 5th. and 6th. receiver. From the results, we conclude that DTxR is a feasible method in DIV networks.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.24-31
• /
• 2007

DVB-T (Digital Video Broadcasting-Terrestrial) is an important multimedia broadcasting technology capable of high data-rate transmission and adopted by Europe. OFDM (Orthogonal Frequency Division Multiplexing) is the backbone technique employed in DVB-T to support multimedia services that have various bandwidths. Unfortunately, an OFDM signal has a large PAPR (Peak-to-Average Power Ratio). In this paper, we investigate the performance of a simple PAPR reduction scheme for the DVB-T system, which requires no change of a receiver structure or no additional information transmission. The approach we employed is clipping in the time and frequency domains. The time-domain clipping is carried out with a predetermined clipping level while the frequency-domain clipping is done within EVM (Error Vector Magnitude). This approach is suboptimal with lower computational complexity compared to the optimal method. The simulation results demonstrate that the proposed one is getting more effective at lower modulation levels and with more allowed constellation error.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.3
• /
• pp.7-18
• /
• 2008

Radio systems decline in the system performances when one system is interfered from the other system. System parameters, which are operating frequency, transmit power, and so on, need to be determined in order that there is no interference between radio systems. We investigate the interference from the sound broadcasting service in the band 87.5-108 MHz to the ILS localizer, one of the aeronautical services, in the band of 108-112 MHz. The results are compared with the interference criteria. And then several system parameters, which are frequency, transmit power, and location, are determined in order to avoid the interference from the FM sound broadcasting service which occupies the frequency band near the band of the aeronautical services. The results of this paper can be applied to set up system parameters of the ILS localizer so that system performance can be maximized. Besides, the result of this paper can be applied for determining spectrum management policy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.298-306
• /
• 2015

In this paper, we propose an efficient resource allocation scheme for the integrated satellite/terrestrial networks. The proposed scheme is a frequency sharing technique to mitigate the inter-component interferences which can be generated between a satellite beam and terrestrial cells that are operated in the same frequency. The proposed dynamic resource allocation scheme can mitigate the total inter-component interference by optimizing the total transmission power and it can expect a result of which can lead to an increase in capacity. In such a system, the interference situation can be affected by the distributed traffic demands or up/down link communications environments. In this point of view, we evaluate the performance of the total consumed power, the amount of inter-component interference with respect to different traffic distributions and interference environments between the satellite beam and terrestrial systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.33-38
• /
• 2010

This paper examines the feasibility of using periodically varying dielectric layers with dielectric constant ${\epsilon}_1$ and ${\epsilon}_2$ at millimeter wave frequency for implementing the frequency-selective reflectors that permit feed separation in large aperture reflecting antenna systems. For oblique incidence, it is found that the total reflection can be obtained at different frequencies for proper choices of ${\epsilon}_1$, ${\epsilon}_2$ and the geometric parameters. In the frequency-selective reflector designed, the bandwidth for 90% reflection is always found to be much narrower than that for 90% transmission.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.109-114
• /
• 2013

The biological active points (BAP) are known as low resistance spots or good electro-permeable points. In this paper, a new method for BAP detection using the bio-impedance measurement system based on the adaptive frequency tracking filter (AFTF) and the transition event detector is presented. Also, the microcontroller process continuous time demodulation of the modulated signal by multi frequency components using the AFTF. The transition event detector based on the phase space method is applied about each frequency using the BAP equivalent model which is proposed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.129-133
• /
• 2019

Frequency resource efficiency is important in satellite communication systems. One of the causes of a waste of frequency resource is bad flatness. In the case, flatness of satellite Tx terminals would be worse by ACI and guard band. In order to overcome this problem, this paper proposes a technique for frequency response equalization in satellite Tx terminals. First of all, a general linear polynomial expression which meets least squares of representative measurement data is calculated to interpolate unmeasured data. And then flatness can be adjusted using the polynomial expression. Simulation results illustrate adjusted data have lower peak to peak and standard deviation than original data, and these show that flatness be improved.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.175-185
• /
• 2009

In this paper, performance of OFDM systems with turbo code is analyzed and simulated in a satellite broadcasting channel. The performance is evaluated in terms of bit error probability. The satellite channel is modeled as a combination of Rayleigh fading with shadowing and Rician fading channels. As turbo decoding algorithms, MAP (maximum a posteriori), Max-Log-MAP, and SOVA (soft decision Viterbi output) algorithms are chosen and their performances are compared. From simulation results, it is demonstrated that Max-Log-MAP algorithm is promising in terms of performance and complexity. It is shown that performance is substantially improved by increasing the number of iterations and interleaver length of a turbo encoder. The results in this paper can be applied to OFDM-based satellite broadcasting systems.