• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.3
• /
• pp.72-82
• /
• 2018

In this paper, we identify risk factors that are likely to occur during the lifecycle of a new product development (NPD) project from the literatures, and identify the three objectives or three constraints that will ultimately be achieved for project success in the ICT industry : performance (scope/quality), schedule (time), and cost. Firstly, we interviewed the project experts to classify the risk factors according that the final project objectives are changeable based on scope/quality, time and cost budget constraints. Secondly, the survey for pairwise comparisons between the risk factors was asked to the project managers and members who had ever actually participated in the NPD projects of ICT industry to determine the priority ranks on relative importance using AHP (Analytic Hierarchy Process). The risk factors negatively affecting the goals of projects were analyzed by using the AHP respectively in four project stages during the life cycle of the project. The comparison of risk factors within each stage is a different approach unlike the literatures which have covered project's overall risk assessment. There is an advantage that risk management can be effectively performed with priorities according to each stage from the start to the end of the project. In other words, it is necessary to identify what risk factors will occur in each stage, and to have ideas at each stage with the priorities so that they can be mitigated and eliminated before actual occurrence. As a result, risks on scope & quality changes were found to be the most important considerations for initiative stage of NPD projects in the ICT industry, whereas in the final stage, risks on schedule (time) changes were the most important priorities. Among the ICT industry product categories, 'communication and broadcasting devices' and 'IT and communication based devices' generally have a high priority in terms of risks on scope & quality changes when initiating the project. At the closing stage of the project, however, considering that schedule (time) changeable risk is getting higher, these products tend to target at B2B market rather than B2C because the new products must be delivered and launched in time as customer firm required.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.165-172
• /
• 2013

Convergence is increasingly prevalent in the IT world which generally refers to the combination of two or more different technologies in a single device. Especially, the spectrum scarcity is becoming a big issue because there are exponential growth of broadcasting and communication systems in the spectrum demand. Cognitive radio (CR) is a convergence technology that is envisaged to solve the problems in wireless networks resulting from the limited available spectrum and the inefficiency in the spectrum usage by exploiting the existing wireless spectrum opportunistically. However, the very process of convergence is likely to expose significant security issues due to the merging of what have been separate services and technologies and also as a result of the introduction of new technologies. The main purpose of this research is focused on devising an adaptive security framework based on carousel for CR networks as a distinct telecommunication convergence application, which are still at the stage of being developed and standardized with the lack of security concerns. The framework uses a secure credential, named as carousel, initialized with the location related information from objects position, which is used to design security mechanisms for supporting privacy and various securities based on it. The proposed adaptive security framework could be used as a security building block for the CR network standards and various convergence applications.

• Journal of East-West Nursing Research
• /
• v.5 no.1
• /
• pp.120-126
• /
• 2000

This study was intended to grasp the history of nursing education from the beginning to the present in Korea, and grip and look-out current diversified systems of nursing education on basis of February, 2000 through literatural review and investigation by close telephone interviews. The basic nursing educational institutions in the whole country were total 113, namely, 3 years course, 65 junior colleges of nursing, and 4 years course, 48 colleges of nursing. And there were 3 types of continuing nursing educational system: two of three were transferring to another college for gain bachelor's degree in nursing; RN-BSN programs and university of broadcasting, and the other was the system of independent learning and then examination for BSN. Total nursing graduates from junior college of nursing courses and college of nursing courses were 7,564 on February, 1999. In general graduate school, the number of master courses were 21 and Ph.D courses were 13. And the number of special graduate schools were 21, i.e., graduate school of education were 7, graduate school of administration were 2, graduate school of public health were 11 and graduate school of industry was 1. As the perspective on nursing education, we overviewed changing nursing organizational environment, increasing the system of continuing education, making standards in nursing education and systemization of nursing educational accreditation, specialization of nursing, information system in nursing education and education of graduate school. The summary of the above overviewed subjects were as follows; Every nursing educational institution needed to educate by educational criteria and standard and characteristically run BSN and graduate courses. Specialization in nursing has to develop more and more, therefore advanced education and law should be prepared appropriately. According to the age's and social needs, we have to establish counter-plan for fundamental educational environment. We have to sensitive to rapidly changing information in the era of globalization. In the level of university education, each university needs characterization of educational objectives, goals and contents, and has to replace the shortage of the number of professor. And the regulation of thesis and dissertation examinations need to be reinforced. Education in nursing should consists with specialization. Collaboration among universities will bring efficiency in the nursing education.

• 전자공학회논문지 IE
• /
• v.47 no.1
• /
• pp.22-33
• /
• 2010

The main purpose of this study was to develope a reflective journal and examine its effects on student's academic achievement and self-regulated learning strategies. For this study, 'a structured reflective journal' was designed through the steps of systems approach with the purpose of enhancing student's academic achievement and self-regulated learning strategies, especially meta-cognition and critical thinking. The reflective journal used in this study contained the constructive elements of (1) self-evaluation with 5 likert scale, (2) learning essay, (3) dialogue with peers, and (4) dialogue with professor. A total of 94 freshmen enrolled in one of two sections of the engineering courses(theory-based class and experiment and practice-based class) participated in the study for 8 weeks. A pre-test-post-test design was used to examine the effects of the application of reflective journal on student's achievement and self-regulated learning strategies. For the result, analysis of covariance was conducted to determine whether there were any academic achievement differences and self-regulated learning strategy differences. The results suggested that students were taking advantages of the reflective journal, and there were statistically significant differences in academic achievement in the experiment and practice-based class and self-regulated learning strategies in both classes.

• The KIPS Transactions:PartC
• /
• v.13C no.4 s.107
• /
• pp.427-434
• /
• 2006

Broadband Convergence Network(BcN) is a critical infrastructure to provide wired-and-wireless high-quality multimedia services by converging communication and broadcasting systems, However, there exist possible danger to spread the damage of an intrusion incident within an individual network to the whole network due to the convergence and newly generated threats according to the advent of various services roaming vertically and horizontally. In order to cope with these new threats, we need to analyze the vulnerabilities of BcN in a system architecture aspect and classify them in a systematic way and to make the results to be utilized in preparing proper countermeasures, In this paper, we propose a new classification of vulnerabilities which has been extended from the ITU-T recommendation X.805, which defines the security related architectural elements. This new classification includes system elements to be protected for each service, possible attack strategies, resulting damage and its criticalness, and effective countermeasures. The new classification method is compared with the existing methods of CVE(Common Vulnerabilities and Exposures) and CERT/CC(Computer Emergency Response Team/Coordination Center), and the result of an application to one of typical services, VoIP(Voice over IP) and the development of vulnerability database and its management software tool are presented in the paper. The consequence of the research presented in the paper is expected to contribute to the integration of security knowledge and to the identification of newly required security techniques.

• Journal of Navigation and Port Research
• /
• v.43 no.1
• /
• pp.42-48
• /
• 2019

The significance of PNT information in the fourth industrial revolution is viewed differently in relation to the past. Autonomous vehicles, autonomous vessels, smart grids, and national infrastructure require sustainable and reliable services in addition to their high precision service. Satellite navigation system, which is the most representative system for providing PNT information, receive signals from satellites outside the earth so signal reception power is low and signal structures for civilian use are open to the public. Therefore, it is vulnerable to intentional and unintentional interference or hacking. Satellite navigation systems, which can easily acquire high performance of PNT information at low cost, require alternatives due to its vulnerability to the hacking. This paper proposed R-Mode (Ranging Mode) technology that utilizes currently operated navigation and communication infrastructure in terms of Signals of OPportunity (SoOP). For this, the Nationwide Differential Global Navigation Satellite System (NDGNSS), which currently gives a service of Medium Frequency (MF) navigation signal broadcasting, was used to validate the feasibility of a backup infrastructure in domestic maritime areas through simulation analysis.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.4
• /
• pp.267-277
• /
• 2021

Both teachers and learners should participate in non-face-to-face class due to COVID-19. The non-face-to-face class has brought about many problems, where they made adequate preparations for such abrupt situation. This study attempted to understand and improve problems occurring during non-face-to-face midi class. The findings are as follows: First, there were differences in equipment available to contact and non-face-to-face class. Such a problem could be improved by using Reaper, DAW which can be installed and freely utilized without any functional limits, regardless of the types of operating systems. Second, latency could not be reduced, when the screen share function of Zoom was used, since it was impossible to select audio interface's drivers in DAW. This problem was improved by again receiving audio output as input and sending it, from the perspectives of teachers. In addition, learners who used the operating system of Windows and have no audio interfaces usually suffer from latency during practices. The latency can be reduced by installing Asio4all. Third, image degradation and screen disconnection phenomena occurred due to the lack of resource. Two computers were connected by using a capture board and the screen disconnection phenomena could be improved by distributing resources and maintaining high-resolution. The system for allowing non-face-to-face midi class could be successfully established, as one more computer was connected by using Vienna Ensemble Pro and more plug-ins were used by securing additional resources. Consequently, the problems of non-face-to-face midi class could be understood and improved.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.161-173
• /
• 2020

In-depth interview in the field of hospitality industry services was conducted in COVID- 19. Introduction of kiosks for non-face-to-face services using untact technology, reservation, pay systems, self-service, service improvement using room service should be carried out. It is also necessary to implement Instagram, Facebook, YouTube, P-blogs, online broadcasting and live commerce through the establishment of m-channel system through untact marketing sales channels in the hospitality industry now that the product composition to solve the pro -blem of untact marketing is drawing attention due to diversification of online sales channe -ls. Now, the recognition of important elements of service education and a establishment of differentiated system of untact marketing, expansion of untact sale channel, implementation of non-face-to-face counseling service and introduction of pre-booking, telecommuting were recognized as urgent parts. In particular, a service differentiation and importance of human services, which were recognized free of charge, have re-recognized as premium, and quality service aspect of the hospitality industry in untact and the direction to diversify marketing channels are presented.

• Journal of Intelligence and Information Systems
• /
• v.28 no.4
• /
• pp.95-117
• /
• 2022

With the emergence of various media types due to the development of Internet technology, advertisers have difficulty choosing media suitable for corporate advertising strategies. There are challenging to effectively reflect consumer contextual information when advertising media is selected based on traditional marketing strategies. Thus, a recommender system is needed to analyze consumers' past data and provide advertisers with personalized media based on the information consumers needs. Since the traditional recommender system provides recommendation services based on quantitative preference information, there is difficult to reflect various contextual information. This study proposes a methodology that uses deep learning to recommend personalized media to advertisers using consumer contextual information such as consumers' media viewing time, residence area, age, and gender. This study builds a recommender system using media & consumer research data provided by the Korea Broadcasting Advertising Promotion Corporation. Additionally, we evaluate the recommendation performance compared with several benchmark models. As a result of the experiment, we confirmed that the recommendation model reflecting the consumer's contextual information showed higher accuracy than the benchmark model. We expect to contribute to helping advertisers make effective decisions when selecting customized media based on various contextual information of consumers.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.1
• /
• pp.44-51
• /
• 2023

Nitrogen fertilizer is an essential macronutrient that requires repeated input for crop cultivation. Excessive use of nitrogen fertilizers can adversely affect the environment by discharging NH₃, NO, and N₂O into the air and leaching into surrounding water systems through rainfall runoff. Therefore, it is necessary to develop a technology that reduces the amount of nitrogen fertilizer used without compromising crop yields. Fertilizer deep placement could be a technology employed to increase the efficiency of nitrogen fertilizer use. In this study, a deep fertilization device that can be coupled to a tractor and used to inject fertilizer into the soil was developed. The deep fertilization device consisted of a tractor attachment part, fertilizer amount control and supply part, and an underground fertilizer input part. The fertilization depth was designed to be adjustable from the soil surface down to a depth of 40 cm in the soil. This device injected fertilizer at a speed of 2,000 m²/hr to a depth of 25 to 30 cm through an underground fertilizer injection pipe while being attached to and towed by a 62-horsepower agricultural tractor. Furthermore, it had no difficulty in employing various fertilizers currently utilized in agricultural fields, and it operated well. It could also perform fertilization and plowing work, thereby further simplifying agricultural labor. In this study, a newly developed device was used to investigate the effects of deep fertilizer placement (FDP) compared to those with urea surface broadcasting, in terms of rice and soybean grain yields. FDP increased the number of rice grains, resulting in an average improvement of 9% in rice yields across three regions. It also increased the number of soybean pods, resulting in an average increase of 23% in soybean yields across the three regions. The results of this study suggest that the newly developed deep fertilization device can efficiently and rapidly inject fertilizer into the soil at depths of 25 to 30 cm. This fertilizer deep placement strategy will be an effective fertilizer application method used to increase rice and soybean yields, in addition to reducing nitrogen fertilizer use, under conventional rice and soybean cultivation conditions.