• Journal of Mechanical Science and Technology
• /
• v.17 no.5
• /
• pp.654-667
• /
• 2003

This paper presents a consequence of the systematic approach to identify the aerodynamic parameters of an unmanned aerial vehicle (UAV) equipped with the automatic flight control system. A 3-2-1-1 excitation is applied for the longitudinal mode while a multi-step input is applied for lateral/directional excitation. Optimal time step for excitation is sought to provide the broad input bandwidth. A fully automated programmed flight test method provides high-quality flight data for system identification using the flight control computer with longitudinal and lateral/directional autopilots, which enable the separation of each motion during the flight test. The accuracy of the longitudinal system identification is improved by an additional use of the closed-loop flight test data. A constrained optimization scheme is applied to estimate the aerodynamic coefficients that best describe the time response of the vehicle. An appropriate weighting function is introduced to balance the flight modes. As a result, concurrent system models are obtained for a wide envelope of both longitudinal and lateral/directional flight maneuvers while maintaining the physical meanings of each parameter.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.240-243
• /
• 2001

As electronic industry and radio communication technologies progress, mankind enjoys its abundant life. On the other hand, it becomes possible that the electrical and electronic equipments are on light weight, small size, high speed, broad bandwidth, and operation by small energy. At the same time, many social problems like EMI/EMS by electromagnetic waves occur. Therefore, tile organizations such as CISPR, FCC, ANCI, etc., have provided the standards of electromagnetic wave environments for the countermeasure of the EMC. In this paper, we designed and studied a new EMI filter for multi-tap in the frequency band from 150 kHz to 30 MHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.119-127
• /
• 2004

This paper reports on the simulation study of gigabit-capable Passive Optical networks (GPON) using WDM focused on single light source per each channel, and proposes using 1550nm VCSEL for light sources. Proposed system uses high speed direct-modulated light sources, in which the merit is able to maintain a low loss. to support broad bandwidth, and to lower network configuration cost. We conformed simulation study on the transmission of the downstream 2.5Gbit/s, upstream 1.25Gbit/s, 622Mbit/s which was recommended by ITU-T G.984.1. We measured the transmission margin and examined the feasibility of proposed system.

• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.250-253
• /
• 2015

High contrast grating (HCG) is the structure made up of the sub-wavelength grating of high-index and the surrounding layer of low-index, which reveals high contrast between two materials. Its advantages include high reflectivity over a broad bandwidth, polarization and wavelength selectivity, optical high-Q resonator, and phase modulation. In this work, the HCG structure comprising of indium tin oxide (ITO) and Silicon (Si), for the surrounding layer and the grating layer respectively, was studied. Its theoretical model was established, and transmittance, phase and optical behavior were calculated by rigorous coupled-wave analysis and finite element method. Furthermore, the established structure was fabricated to validate its feasibility. The fabricated structure shows the focusing capability whose length is about $10{\mu}m$, and the feasibility of the structure was demonstrated. It is also meaningful that ITO layer can contribute to the fabrication of the HCG structure, leading to enable the structure to be electrical-driven.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.282-287
• /
• 1995

We have studied the characteristics of a cw Ti:sapphire laser pumped by an Ar-ion laser. Ti:sapphire is one of the most attractive materials for the generation of ultra-short pulses because of its very broad gain bandwidth. We used a 4.1 mm thick, 0.15 wt. % $Ti^{3+}$ -doped, Brewster-angled Ti:sapphire crystal and made a folded cavity to create a strong focusing mode. The folding angle of the cavity was adjusted to $15.4^{\circ}$ to compensate for the astigmatism from the Brewster-angled Ti:sapphire crystal. 5 WAr-ion laser was used as a pumping source. We observed that the Ti:sapphire cw output power was sensitively changed with respect to the condition of the folded cavity. The threshold pumping power was 2 Wand the slope efficiency was 16% when an output coupler of 10% transmission was used. The maximum output power was more than 450 mW at 5 W pumping. mping.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.143-148
• /
• 2013

A novel ultracompact polarization beam-splitter (PBS) combining two plasmonic multimode interference couplers (P-MMICs) and DFB guiding structure is implemented. The $2{\times}1$ and $1{\times}2$ P-MMICs are designed to collect the polarized powers of TE and TM modes reflected by or transmitted through an internal DFB structure. The simulation results show that the designed DFB-assisted PBS is very short (about $75{\mu}m$), and has a low insertion loss, a high extinction ratio, and a broad bandwidth of 20 nm.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.279-285
• /
• 2003

Wide- and flat-gain laser diodes were designed and fabricated from asymmetric multiple quantum well (AMQW) structures which consist of three compressively strained InGaAsP wells of different thicknesses. For a 400 ${\mu}{\textrm}{m}$-long lasers with as-cleaved facets, -1 ㏈ and -3 ㏈ gain bandwidth were 45 nm and 80 nm, respectively. For this AMQW structure, calculated gain spectra with various line broadening functions were compared with experimental results. We confirmed the calculated gain spectra using an asymmetric line broadening function were in good agreement with the measured data.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.115-122
• /
• 1987

In this paper, we proposed an improved weakly-coupled power divider(TAP UNIT) for CATV and/or MATV systems, by which the degree of freedom in design and density of coupling interval are signifcantly increased compared with the intrinsic one even though the turn ratios are still of discrete values. On the other hand, the new design theory of a generalized n-way power divider with arbitrary dividing ratios, for CATV and/or MATV systems, which consists of ideal multiwinding transformers and resistors only was presented. Since the circuit elements is not frequency dependent, the proposed power divider is to be of considerably broad bandwidth. Furthermore, the experimental verification has been achieved, and, hence, the validity of the design theory proposed here is confirmed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1107-1116
• /
• 2007

In this paper, a broadband open stubs band pass filters which can suppress the second harmonics using Z-transform technique, is designed, fabricated and characterized. The proposed broadband filters integrate the band stop filter with the FSCS structure and ${\lambda}_g/4$ open stub in order to suppress the second harmonics. Due to insertion of BSF at input and output terminal, the size of the filter was increased in the conventional filter, however, in the proposed structure, the position of inverter that connects the stubs can be integrated between those stubs, thereby decreasing the size. So, it can be fabricated in the size of $18.7{\times}16.9mm^2$ which is smaller size than conventional one. The measured results of the proposed filters have center frequency of a 5.8 GHz with bandwidth of 95 %, insertion loss of 0.6 dB, return loss of 14 dB. The simulation results are consistent with measurement results. The filter is designed far X-band satellite communication and ITS applications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.5 s.96
• /
• pp.501-510
• /
• 2005

In this paper, the miniaturized linear and circular polarization microstrip antennas are designed and fabricated at the resonant frequency of 1.575 GHz. To miniaturize the microstrip patch antenna(MPA), the 'L' type plates are attached under the rectangular microstrip patch. In case of the linear polarization, the size of the microstrip antenna attached the 14 plates is reduced to $67.9\%(47mm{\times}47mm)$ compared with general $MPA(83mm{\times}83mm)$. The return loss and -10 dB bandwidth are -34.4 dB and 49 $MHz(3.1\%)$. And the radiation pattern is broad through the size reduction of the patch. Also in case of the circular polarization, the size of the microstrip antenna with 13 plates is reduced to $54.6\%(53mm{\times}54mm)$ compared with the general $MPA(76mm{\times}83mm)$. The axial ratio is 1.37dB at 1.575 GHz, the 2 dB axial ratio bandwidth is 14 $MHz(0.8\%)$. As that result, we could confirm that 3-dimensional structure with attached 'L' shaped plate is proper form for the miniaturization of linear and circular polarization microstrip antenna.