• Journal of Photoscience
• /
• 제2권2호
• /
• pp.89-93
• /
• 1995

Solvatochromic effects and hydrogen bonding interactions of 4-hydroxy-4'-nitrostilbene(NSOH) were investigated. Electronic transition energies of NSOH have good correlation with Taft's $\pi$$^*$. The hydrogen bonding interactions can be accounted by analysis with equation of $\Delta$E= $\Delta$E$_0$ + s($\pi$$^*$ + d$\delta$) + a$\alpha$ + b$\beta$. From UV-visible absorption maximum energies, $\Delta$E = 81.2 kcal/mole - 6.66($\pi$$^*$ - 0.20$\delta$) - 0.66$\alpha$ - 1.93$\beta$ (corr.=0.970) was obtained, and from fluorescence intensity maximum energies, $\Delta$E= 70.07 kcal/mole - 21.6($\pi$$^*$ - 0.11d) - 1.74$\alpha$ - 2.73$\beta$ (corr.=0.947) was obtained. The micropolarity estimated at the solubilization sites is close to the polarity of water. The apparent Taft's $\pi$$^*$ values of solubilization sites are close to 1. Howcver, the solubilization sites for the fluorescent NSOH is rather nonpolar. Both NSOH and NSO$^-$ can be solubilized in CTAB and CTAC micelles and NSOH is the only species that can be solubilized in SDS and Brij-35 micelles.

• 한국미생물·생명공학회지
• /
• 제20권4호
• /
• pp.401-408
• /
• 1992

Cholesterol oxidase를 생산하는 균주를 토양으로 분리하고 이를 배양하여 효소를 생산한 후 정제하여 그 특성을 조사하였다. 본 효소는 CH2 concentrator에 의한 농축, DEAE-cellulose chromatography, Superose 12 column FPLC로 정제하였고, 비활성이 약 31배나 증가하였다. 이 효소는 $50^{\circ}C$, pH 6.0에서 최대 활성을 나타냈고 30-$45^{\circ}C$ 범위에서는 안정하였다. pH에 대한 안정성은 pH 6.0-11.0까지 광범위한 안정성을 보였으며, Km 값은 cholesterol에 대해서 $3.65{\times}10^{-3}$M이며 분자량은 59,500 dalton으로 추정 된다. 또한 $Ca^{2+}$, $Ba^{2+}$, $Fe^{2+}$, Brij 35에 의해서는 효소의 활성이 저해되지 않았지만, $Hg^{2+}$, $Ag^{2+}$ 및 SDS에 의해서는 저해되는 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제24권1호
• /
• pp.37-44
• /
• 2003

We examined the effect of polyether-type nonionic surfactants (Brij 35, Triton X-100, Tween 20 and Tween 80) on the potentiometric properties of sodium-, potassium- and calcium-selective membranes which are prepared with widely used ionophores and four kinds of polymer matrices [poly(vinyl chloride) (PVC), polyurethane (PU), PVC/PU blend, and silicone rubber (SR)]. It was found that the PVC-based membranes, which provide the best performance among all other matrix-based membranes in the absence of nonionic surfactants, exhibited larger change in their potentiometric properties when nonionic surfactants are added to the sample solution. On the other hand, the sodium-selective SR-based membrane with calix[4]arene, potassium-selective PVC/PU- or SR-based membrane with valinomycin, and the calcium-selective SR-based membrane with ETH 1001 provide almost identical analytical performance in the presence and absence of Tween 20 or Tween 80 surfactants. The origin of nonionic surfactants effect was also investigated by interpreting the experimental results obtained with various matrices and ionophores. The results suggest that the nonionic surfactant extracted into the membrane phase unselectively form complexes with the primary and interfering ions, resulting in increased background potential and lower binding ability for the ionophore. Such effects should result in deteriorated detection limits, reduced response slopes and lower selectivity for the primary ions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.166-169
• /
• 2003

In this study, we evaluated the characteristics by the addition of 3 different kinds of nonionic surfactant to improve the dispersion stability of slurries. Slurry stability is an issue in any industry in which settling of particles can result in poor performance. So we observed the variation of particle size and settling rate when the concentration and addition time of surfactant are changed. When the surfactant is added after milling process, the particle size and pH became low. It is supposed that the particle agglomeration was disturbed by adsorption of surfactant on alumina abrasive. The settling rate was relatively stable when nonionic surfactant is added about 0.1~1.0 wt%. When molecular weight(MW) is too small like Brij 35, it was appeared low effect on dispersion stability. Because it can't prevent coagulation and subsequent settling with too small MW. The proper quality of MW for slurry stability was presented about 500,000. Consequently, the addition of nonionic surfactant to alumina slurry has been shown to have very good effect on slurry stabilization. If we apply this results to copper CMP process, it is thought that we will be able to obtain better yield.

• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.51-57
• /
• 2016

이 연구에서는 계면활성제에 작용기를 첨가하여 유화제 뿐만 아니라 합성에서의 모노머로 작용할 수 있는 반응성 계면활성제를 합성하였다. 반응성 계면 활성제는 메타아크릴 산, 아크릴산과 비이온성 계면 활성제인 폴리 옥시 에틸렌 라우릴 에테르 (POE 23)를 사용하여 합성되었으며 벤젠을 용매로서 사용하였고, P-TsOH를 촉매로서 사용 하였다. 합성된 계면 활성제는 FT-IR, $^1H$-NMR 스펙트럼, 원소 분석을 하였다. 물성 평가는 HLB, Cloud point, 표면 장력, 임계 미셀 농도를 측정 하였다. HLB 값은 11.62~12.09 범위로 평가 하였다. cmc 값은 표면 장력 법으로 측정하였을 때 $1{\times}10^{-4}{\sim}5{\times}10^{-4}$의 값을 가졌다. 실험을 통해 측정된 Cloud point은 35, $39^{\circ}C$ 이었다. 합성 계면 활성제의 유화 특성은 polyoxyethylene lauryl ether보다 낮았다. 또한, 유화력은 벤젠에서 보다 대두유에서 더 좋았다. 실험결과 합성 수율은 93.27 ~ 94.49%로 확인되었다.