• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.878-881
• /
• 2005

We report a cell gap variation tolerant liquid crystal display(LCD). Since the cell gap variation of the LCD results in the variation of brightness and contrast ratio, we should control carefully the process to get the uniform cell gap. For the projector application, this is more significant and the one reason of the low yield. We observed that the brightness variation of LCD is suppressed by insertion of dielectric layer between the pixel electrode and liquid crystal.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2019-2021
• /
• 1999

In this paper, the AC-PDP's structural defects with a gap between front and rear glass are investigated. Breakdown voltage, sustain voltage, current and brightness have been measured for various gaps between two plates under various gas pressures. The experimental results show that the firing voltage, sustain voltage and brightness were decreased whereas the discharge current was increased as the gap increased. When the gap is over $40{\mu}m$, it was impossible to drive cells separately.

• Transactions on Electrical and Electronic Materials
• /
• 제9권1호
• /
• pp.16-19
• /
• 2008

In this study, it was investigated about optical simulation in direct-type backlight design. Direct-type backlight has been used high-brightness backlight such as medical LCD application. The key parameter in designing direct-type backlight was consists of three geometrical dimension such as the distance of two lamps, the gap of lamp and reflection plate and the number of lamps. It has many of variations in optical design and it causes the different properties in backlight system. It shows the best values of above parameters; 26 mm of the distance of two lamps, 4.5 mm of the gap of lamp and reflection plate and 16 lamps. And we produced the specimen as above condition, and acquired good result in backlight such as the value of the brightness is 6423 nit in center of emission area and less than 5 % in brightness uniformity. It shows the effective ways of designing backlight system using optical simulation method for medical LCD application.

• 한국위성정보통신학회논문지
• /
• 제11권3호
• /
• pp.28-31
• /
• 2016

본 연구에서는 최근 의료용으로 많이 사용되고 있는 고휘도, 고균일도의 직하광원구조를 가지는 백라이트 유닛에 대한 설계 시뮬레이션을 실시하였다. 직하형 백라이트 시스템은 기존의 Edge-Lighr 방식에 비해서 고휘도 및 고균일도를 달성할 수 있어 의료용 판독이 요구되는 고품질의 디스플레이에 사용되고 있으며, 흑백이미지를 바탕으로 진단을 실시하는 경우가 많기 때문에 휘도 및 휘도 균일도에 대한 높은 성능이 요구되는 분야이다. 본 연구에서는 복수 개의 램프를 수평으로 배열한 경우에 각 램프간의 거리 및 반사판과의 거리, 상측 확산판과의 거리에 대한 최적설계를 실시하고, 이 결과를 바탕으로 실물과 유사한 조건에서 시뮬레이션을 실시하였다. 연구 결과, Parameter 에 의존하는 변수를 최적화 할 수 있었으며, 4.5mm 의 램프와 반사판 거리 및 26mm 의 램프간 거리를 바탕으로 16개의 램프를 배치하여, 32인치 크기의 화면에서 6423nit 의 중심휘도를 갖는 고품위의 우수한 광원의 설계가 가능함을 확인할 수 있었다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.347-350
• /
• 2000

Enzymatic deinking of office-waste paper was studied using crude cellulase and papain-hydrolyzed cellulase from Trichoderma reesei Rut C-30 in small-scale and mid-scale. The results were compared with deinkings using commercial enzyme(Novozym 342) and conventional chemical methods. Maximum brightness and freeness were obtained at 3 units/g Oven Dry Paper(ODP) of CMCase activity using crude cellulase in mid-scale deinking experiments. The deinked pulp had higher physical strength and brightness, and lower freeness and yield than the pulp deinked in small scale. In small scale deinking, maximum brightness and freeness were obtained at 2 unit/g ODP. Deinking by papain-hydrolyzed cellulase showed similar results with one by Novozym 342. It was better in brightness and freeness, but showed lower physical strength and yield, than the conventional deinking by sodium hydroxide. The ratio of endo-1,4-glucanase and exo-1,4-glucanase components in papain hydrolyzed cellulase from T. reesei Rut C-30 was similar to that of commercial enzyme, Novozym 342, implicating a successful application as a deinking enzyme.

• 한국방사선학회논문지
• /
• 제9권4호
• /
• pp.227-234
• /
• 2015

본 연구는 간 초음파영상에서 통계적 속성 기반의 밝기 히스토그램에 기초한 픽셀 질감분석 파라미터(평균밝기, 왜곡도, 균일도, 엔트로피)와 간과 콩팥실질의 밝기 차를 이용한 영상분석을 통해 미만성 간질환의 컴퓨터보조진단 적용 가능성을 알아보고자 하였다. 실험은 간 초음파영상(정상, 지방간, 간경화)에서 관심영역($50{\times}50$픽셀)을 설정하고 4가지의 픽셀 질감분석 파라미터와 간과 콩팥의 실질 밝기의 차를 이용하여 질환인식률을 평가하였다. 그 결과 평균밝기, 균일도, 엔트로피의 질환인식률은 100%, 왜곡도 96%로 높게 나타났으며, 간과 콩팥의 실질 밝기 차는 정상 $-1.129{\pm}12.410$, 지방간 $33.182{\pm}11.826$으로 뚜렷한 차이를 나타내었으나, 간경화의 경우 $-1.668{\pm}10.081$로 정상과는 다소 작은 차이를 나타내었다. 이러한 결과를 바탕으로 높은 질환인식률을 보인 픽셀 질감분석 파라미터와 실질 밝기 차를 이용한 컴퓨터보조진단은 미만성 간질환의 감별에 유용한 도구로써 임상적인 활용 가능성이 있으며, 판독 오류를 최소화하고 정확한 진단과 치료방향 제시에 도움이 될 것으로 기대된다.

• 패션비즈니스
• /
• 제17권5호
• /
• pp.45-56
• /
• 2013

This study researches functional arrangements for colors of work clothes - concentrating on the arrangements of lightness - for safety protection of workers at the job sites in the mechanical industry. To conduct such study, blue color (5PB) is selected for the CAD simulations on six arrangements of brightness based on two colors. The brightness ranges are of 5PB color (between 3~7.5) which are measurable by Munsell Conversion, and arrangements on lightness consisting of one arrangement of high lightness-gap, two of medium lightness-gap, and three of low lightness-gap. To analyze the data of color values after applying arrangements of lightness and to evaluate the levels of awareness regarding arrangements, the NCS colorimetric is being applied. Color palettes are based on the NCS notations, and then marked with color triangles. After evaluation, the visibility proves to be high when the arrangements contain high lightness at the top and bottom, and the arrangements with higher lightness-gap show higher effects in safety. Since this study tends to check factors of lightness, the other color factors were limited. Therefore, in order to apply these results at the job sites, integrated applications of such results will be very useful for developing safe working clothes in the future.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.415-415
• /
• 2007

In this study. it was investigated about optical simulation in direct-type backlight design. Direct-type backlight has been used high-brightness backlight such as LCD television application. The key parameter in designing direct-type backlight was consists of three geometrical dimension such as the distance of two lamps. the gap of lamp and reflection plate and the number of lamps. It has many variation in optical design and it causes the different properties in backlight system. It shows the best values of above parameters; 26mm of the distance of two lamps. 4.5mm of the gap of lamp and reflection plate and 16 lamps. And we produced the specimen as above condition. and acquired good result in backlight such as the value of the brightness is 6436 nit in center of emission area and less than 5% in brightness uniformity. It shows the effective ways of designing backlight system using optical simulation method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.795-798
• /
• 2008

The discharge characteristics of a flat plasma backlight with long electrode gap are investigated. The effect of operating voltage and repetition rate on brightness and luminance efficiency is investigated. A new high efficacy mode is found at low frequencies around 15-40 KHz; a lumen efficacy of 15.3 lm/W is achieved at a luminance of $2400\;cd/m^2$. In the high brightness mode, present at high voltage, we find a maximum luminance of $5900\;cd/m^2$ at 30KHz.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1519-1524
• /
• 2006

We report on new transflective liquid crystal displays (LCDs) having a single cell gap and a single LC mode combined with an inner-patterned retarder. In a vertically or planarly aligned configuration the brightness is greatly improved and a single driving scheme can be employed.