• 제목/요약/키워드: Brightness deviation

검색결과 41건 처리시간 0.027초

항공사진판독에 의한 자연재해예측을 위한 기초적 연구 (Foundmental Study of Prediction of Natural Disaster Using the Aerial Photo Interpretation)

  • 강인준;곽재하;정재형
    • 한국측량학회지
    • /
    • 제10권2호
    • /
    • pp.57-62
    • /
    • 1992
  • 산지가 많은 우리나라에서는 인구가 증가함에 따라 토지의 이용이 평지에서 경사지로 이동되고 있으며, 산사태와 같은 자연재해는 인명의 손실, 재산상의 손실, 그리고 자연환경 파괴를 일으켜 그 연구의 중요성이 증가하고 있다. 산사태 예측에 있어서 단일사면에 대한 안정검토해석이 아닌 광범위한 지역의 위험지 예측은 중요한 과제라 할 수 있다. 본 연구에서는 산사태 지역의 항공사진 스캐닝으로 얻은 이미지밝기값의 평균 및 표준편차에 대한 상관관계를 알 수 있었다. 산사태 지역에서는 밝기값 범위가 35~65에 분포하였고, 표준편차가 경년변화에서 조금씩 증가하는 것으로 나타났다. 또한, 넓은 지역의 산사태 조사에서는 항공사진 자료에 의해 경사도, 토질특성, 피복상태의 상관관계를 구할 수 있다.

  • PDF

GMS/S-VISSR 자료로부터 Bispectral Thresholds 기법을 이용한 운량 분석에 관하여 (Cloud Cover Analysis from the GMS/S-VISSR Imagery Using Bispectral Thresholds Technique)

  • 서명석;박경윤
    • 대한원격탐사학회지
    • /
    • 제9권1호
    • /
    • pp.1-19
    • /
    • 1993
  • A simple bispectral threshold technique which reflects the temporal and spatial characteristics of the analysis area has been developed to classify the cloud type and estimate the cloud cover from GMS/S-VISSR(Stretched Visible and Infrared Spin Scan Radiometer) imagery. In this research, we divided the analysis area into land and sea to consider their different optical properties and used the same time observation data to exclude the solar zenith angle effects included in the raw data. Statistical clear sky radiance(CSRs) was constructed using maximum brightness temperature and minimum albedo from the S-VISSR imagery data during consecutive two weeks. The CSR used in the cloud anaysis was updated on the daily basis by using CSRs, the standard deviation of CSRs and present raw data to reflect the daily variation of temperature. Thresholds were applied to classify the cloud type and estimate the cloud cover from GMS/S-VISST imagery. We used a different thresholds according to the earth surface type and the thresholds were enough to resolve the spatial variation of brightness temperature and the noise in raw data. To classify the ambiguous pixels, we used the time series of 2-D histogram and local standard deviation, and the results showed a little improvements. Visual comparisons among the present research results, KMA's manual analysis and observed sea level charts showed a good agreement in quality.

가상공간 융합을 위한 다중 카메라 영상 특징 분석 (Multi-camera image feature analysis for virtual space convergence)

  • 윤종호;최명렬;이상선
    • 한국융합학회논문지
    • /
    • 제8권5호
    • /
    • pp.19-28
    • /
    • 2017
  • 본 논문은 가상공간 제작을 위해 다수의 카메라로 영상을 촬영했을 때, 영상 특성 차이를 감소시키는 방법을 제안하였다. 각각 8 개의 본체와 렌즈를 교차 장착하여 64 개의 영상을 사용하였다. 영상 분석은 히스토그램과 픽셀 분포 값의 표준 편차를 분석 비교하였다. 분석결과, 동일 기종의 카메라임에도 불구하고, 렌즈 혹은 이미지 센서에 따라 각각 다른 영상 특성을 보여주었다. 본 논문에서는 이러한 차이를 보정하기 위해 영상의 전체 밝기 값의 분포를 조절하였다. 시뮬레이션 결과, 평균 편차가 최대 (실내 : 6.89, 실외 : 24.23) 이었으나, 시뮬레이션 진행 후 편차가 거의(실내 : 최대 0.42, 실외 : 최대 : 2.73) 없는 영상을 얻었다. 추후에는 영상 밝기 분포보다 정밀한 영상 분석 방법을 연구하고 적용할 것이다.

선형 추정 CDF에서 밝기 보존을 이용한 이미지 콘트라스트 향상 기법 (An Image Contrast Enhancement Method Using Brightness Preseving on the Linear Approximation CDF)

  • 조화현;최명렬
    • 정보처리학회논문지B
    • /
    • 제11B권7호
    • /
    • pp.779-784
    • /
    • 2004
  • 본 논문에서는 평판디스플레이 상에서 밝기 보존을 이용한 콘트라스트 향상 기법을 제안하였다. 제안한 방식은 실시간 처리를 위하여 선형추정방법을 적용하여 누적분포함수를 계산함으로써 하드웨어 복잡성을 감소시켰다. 본 논문에서는 제안한 알고리즘을 효과적으로 처리하기 위하여 누적분포함수의 샘플 값과 배럴쉬프트(Barrel Shift)를 사용하였다. 제안된 방식에 의한 처리 결과와 원 영상의 화질 평가를 위하여 시각적 검증과 히스토그램 편차를 도입하였다.

마커 방식 실내 내비게이션을 위한 조명 변화에 강한 임계값 결정 방법 (Robust Threshold Determination on Various Lighting for Marker-based Indoor Navigation)

  • 최태웅;이현철;허기택;김은석
    • 한국콘텐츠학회논문지
    • /
    • 제12권1호
    • /
    • pp.1-8
    • /
    • 2012
  • 본 논문에서는 실내 조명 변화에 따라 마커 인식률의 차이가 커지는 현상을 해결하기 위해, 마커 인식을 위한 전처리 단계인 이진화 단계에서 최적의 임계값을 결정하는 방법을 제안한다. 제안 방법은 밝은 조명, 어두운 조명, 불특정 물체에 따른 그림자 현상이 나타나는 실내 환경에서 영상의 평균 명도값, 표준편차 및 최대편차를 고려하여 최적 임계값을 결정한다. 특히 그림자에 의한 그라데이션 현상을 해결하기 위해 이미지의 밝기에 따른 가중치를 적용함으로써 인식률을 향상시켰다. 제안방법은 다양한 조명환경에서 $720{\times}480$ 해상도의 영상을 처리하는데 빠른 처리 속도와 높은 인식률을 보여 실내 내비게이션에 적합할 것으로 기대된다.

혼합형 채광조절장치가 실내공간의 휘도분포에 미치는 영향에 관한 Mockup 실험평가 (Luminance Performance of a Room with Light Guide and Blind Systems by Mockup Experiments)

  • 신화영;안현태;김정태
    • KIEAE Journal
    • /
    • 제7권1호
    • /
    • pp.65-72
    • /
    • 2007
  • As ecological design elements, daylighting can be applied to provide adequate illumination on visual tasks to create an attractive visual environment and to save electrical energy. Daylighting control systems reject direct sunlight and penetrate it onto the ceiling or to deep into the room. This study aims to evaluate the luminance environment of sloped light guide with automated venetian blind systems according to sun angle changes. For evaluation, a mock-up model was used and the south facing side-window mounted between the clerestory window and the view window. To assess luminance performance, 3 view points of luminance were monitored. As results, the conventional and lightshelves show ideal luminance ratio between workplane and surroundings(3:1) and workplane and darkness area(2:1) due to total ratio of surroundings and darkness area has lower ratio than workplane. Compared to the lightshelves window, conventional window shows unrelieved effect in between the workplane and brightness area(1:5). It means that there has low deviation according to the required standards. Also, compared to the ratio between the brightness area and darkness area(2~6:1) conventional window with high deviation(10~20:1) provide discomfort glare due to the excessively strong contrast, while lightshelves window shows a required luminance ratio that provide a three-dimensional effect to occupants. Therefore, luminance distribution indicate that application of a lightshelves and blinds not only has a significantly positive effect but also offers higher luminance quality in a daylit room

속실렛 추출법에 의한 밀랍지의 탈랍처리 효과분석 (Effect of Soxhlet Extraction Condition on Dewaxing Efficiency of the Beeswax-Treated Paper)

  • 최경화;장혜미
    • 펄프종이기술
    • /
    • 제45권5호
    • /
    • pp.64-70
    • /
    • 2013
  • In this study, the effect of soxhlet extraction on dewaxing of the aged beeswax-treated paper was examined. To do this, soxhlet extraction of the aged beeswax-treated paper performed with different reflux conditions and then measured the dewaxing efficiency and change in the various properties such as tensile strength, folding endurance, color and brightness. Also, an artificial aging test was executed in order to investigate the effect of soxhlet extraction on the preservability of the dewaxed paper. As the result of FT-IR analysis, a peak area of CH and COOH group, which are main band of beeswax, was decreased or removed after soxhlet extraction. The decreasing rate of each peaks were increased depending on reflux time. After dewaxing, the physical property such as MIT type folding endurance and tensile strength was decreased. And $L^*$ value and brightness were increased while $a^*$ and $b^*$ value were decreased due to the remove of color compounds in beeswax. The more color deviation (${\Delta}E$) is expected with higher reflux times. As the result of artificial aging, preservability of two dewaxed papers except of DP_SE(C) sample was higher than that of untreated paper i.e. beeswax-treated paper.

RELATION BETWEEN BLACK HOLE MASS AND BULGE LUMINOSITY IN HARD X-RAY SELECTED TYPE 1 AGNS

  • Son, Suyeon;Kim, Minjin;Barth, Aaron J.;Ho, Luis C.
    • 천문학회지
    • /
    • 제55권2호
    • /
    • pp.37-57
    • /
    • 2022
  • Using I-band images of 35 nearby (z < 0.1) type 1 active galactic nuclei (AGNs) obtained with Hubble Space Telescope, selected from the 70-month Swift-BAT X-ray source catalog, we investigate the photometric properties of the host galaxies. With a careful treatment of the point-spread function (PSF) model and imaging decomposition, we robustly measure the I-band brightness and the effective radius of bulges in our sample. Along with black hole (BH) mass estimates from single-epoch spectroscopic data, we present the relation between BH mass and I-band bulge luminosity (MBH-MI,bul relation) of our sample AGNs. We find that our sample lies offset from the MBH-MI,bul relation of inactive galaxies by 0.4 dex, i.e., at a given bulge luminosity, the BH mass of our sample is systematically smaller than that of inactive galaxies. We also demonstrate that the zero point offset in the MBH-MI,bul relation with respect to inactive galaxies is correlated with the Eddington ratio. Based on the Kormendy relation, we find that the mean surface brightness of ellipticals and classical bulges in our sample is comparable to that of normal galaxies, revealing that bulge brightness is not enhanced in our sample. As a result, we conclude that the deviation in the MBH-MI,bul relation from inactive galaxies is possibly because the scaling factor in the virial BH mass estimator depends on the Eddington ratio.

기후학적 평년 표준편차 분포도의 상세화 (Estimation of Climatological Standard Deviation Distribution)

  • 김진희;김수옥;김대준
    • 한국농림기상학회지
    • /
    • 제19권3호
    • /
    • pp.93-101
    • /
    • 2017
  • 2011-2015년까지 경남 하동군 악양 집수역의 해발고도 8~1,073m 범위에 설치된 10개 무인기상관측기에서 0600, 1500 기온 관측값을 수집하여 월별 표준편차를 계산하고, 소기후모형으로부터 예측된 기온의 표준편차 결과를 함께 비교하여 미관측 지점의 추정기술에 실효성이 있는지 평가하였다. 소기후모형에 따른 예측값은 월별 0600, 1500 기온의 표준편차를 각각 88%, 86% 정도 설명할 수 있었지만, 전반적으로 과소추정하는 경향이었다. 겨울철과 여름철에 나타나는 낮은 고도 대비 해발고도가 높아질수록 변이가 작아지거나 커지는 방향성에 있어서 관측값과는 반대양상으로 나타나 당초 기대와는 다른 결과를 보였다. 또 다른방법으로 월별 기온 표준편차와 지형간의 관계를 정량화하여 임의지역의 지형특성과 종관규모 수준의 기온자료 만으로 표준편차 분포를 예측할 수 있을지 회귀분석을 수행하였다. 회귀모형은 해발고도편차에 따라 보정된 월별 기온 외에, 경사도와 경사향 등 기본적인 지형인자와 온난대효과와 냉기집적효과, 개방도 등의 기온과 관련된 변수들을 고려하여 월별로 표준편차를 가장 잘 설명할 수 있는 변수를 1~3개까지 선발하여 만들어졌으며, 월별 결정계수는 0.46부터 0.98 범위로 나타났다. 회귀모델을 이용해 기온이 관측되지 않는 임의지역의 표준편차를 지형변수의 최소-최대값 유효범위 내에서 월별로 예측한다면 70% 수준의 추정능력으로 공간변이 분포도를 나타낼 수 있을 것으로 예상된다.

뽕나무 한지의 지합특성 (Sheet Formation Properties of Morus Hanji)

  • 이일로;조남석
    • 펄프종이기술
    • /
    • 제38권3호
    • /
    • pp.47-60
    • /
    • 2006
  • This study was carried out to investigate the sheet formation properties of Morus Hanjis, made of bast and whole stalk pulps by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulping. Two species of Morus, M. alba and M. lhou, were used. Effect of morphological properties of pulp stocks on the sheet formation and its gray levels based on optical property were evaluated using an Image analyzer. In addition, the effect of fiber distribution index(FDI) which was calculated from tile data of Confocal laser scanning microscopy(CLSM) on the sheet formation and optical properties of Morus Hanji were also discussed. On the sheet formation, Hanji from whole stalk pulp was superior than that of bast pulp. The more the sheet formation improved, the more paper opacity decreased. In the aspect of Hanji's surface characteristics analyzed by an Image analyzer, the average gray level and its standard deviation of Hanji from the whole stalk pulp were rather lower than those of bast pulp because of better sheet formation of the former. However, high brightness Hanji showed high value of gray level. The sheet formation and paper opacity were increased with the decrease of standard deviation of gray level. From these results, gray level measurement could be used to predict the paper opacity as well as sheet formation. Sheet formation of whole stalk Hanji and its FDI measured by CLSM were higher than those of bast fibers. In conclusion, the sheet formation and opacity of Hanji could be evaluated by standard deviation value of Hanji's gray level using an Image analyzer and by fiber distribution index using CLSM.