• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.124.1-124
• /
• 1998

• 폴리머
• /
• 제33권5호
• /
• pp.413-419
• /
• 2009

프리즘 시트의 프리즘 층 물질의 굴절률을 증가시킬수록 휘도가 향상되어 LCD 백라이트 유닛의 효율이 향상되었다. 프리즘 층의 굴절률을 증가시키기 위해서 방향족을 포함하고 있는 고굴절 물질과 다관능성 반응물을 혼합하여 자외선 경화형 수지를 제조하였다. 9,9-Bis [4-(2-acryloyloxyethoxy)phenyl] fluorene을 반응시켜 프리즘층의 도막 굴절률을 1.58까지 증가시켰고 백라이트의 휘도를 향상시킬 수 있었다. 백라이트 유닛에 사용되는 광원에 장기간 노출될 경우 프리즘 시트에 황변현상이 발생하게 되어 휘도가 감소되므로 자외선 안정제로 hindered amine light stabilizer를 사용하여 프리즘 시트의 내황변성을 크게 향상시켰다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.149-152
• /
• 2007

The detection of yellow sand dust using satellite has been utilized from various bands from ultraviolet to infrared channels. Among them, Infrared channels have an advantage of detecting aerosols over high reflecting surface as well as during nighttime. Especially, brightness temperature difference between 11 and 12{\mu}m(BTD) was often used to distinguish between water cloud and yellow sand, because Ice and liquid water particles preferentially absorb longer wavelengths while aerosol particles preferentially absorb shorter wavelengths. We have found that the BTD significantly depends on surface temperature, emissivity, and zenith angle and thereby the threshold of BTD. In order to overcome these problems, we have constructed the background brightness temperature threshold of BTD and then subtracted it from BTD. Along with this, we utilized high temporal coverage of geostationary satellite, MTSAT-1R, to verify the reliability of the retrieved signal in conjunction with forecasted wind information. The statistical score test illustrated that this newly developed algorithm showed a promising result for detecting mineral dust by reducing the errors in the current BTD method.

• 한국정보통신학회논문지
• /
• 제14권7호
• /
• pp.1708-1714
• /
• 2010

본 논문에서는 기존의 full color LED 전광판에서 일반적인 화질 개선 혹은 화질 보정의 방법으로는 감마, 휘도, 명도조절 등으로 영상의 전체적인 색상과는 상관없이 일률적으로 밝게 혹은 어둡게 처리해 왔다. 그러나 단순히 표출되는 영상 자체의 휘도를 일정 크기로 일률적으로 휘도를 조정하는 방법은 입력되는 영상 신호의 특성을 반영하지 않아 단지 화면 전체가 밝아지거나 어두워졌다는 느낌만을 줄 뿐이다. 그래서 기존의 영상 전송 방식과는 다른 새로운 기술로 LED 전광판에 입력되는 영상 데이터의 히스토그램 분석을 통해 기준 휘도 값을 결정함으로써 입력되는 영상 데이터의 특성이 반영되고, 해당 기준 휘도 값에 따라 히스토그램의 분포를 제어함으로써 LED 전광판에 표출되는 영상 휘도를 균일하게 향상시킬 수 있는 히스토그램 분포 제어가 가능한 full color 전광판의 영상 구동 처리기술을 제안하였다.

• 펄프종이기술
• /
• 제46권3호
• /
• pp.20-27
• /
• 2014

Nowadays, the bleaching techniques of thermomechanical pulp(TMP) are fast developing on the strength of some benefits, mainly on low production cost and good fiber property. In this study, the optimum concentration of bleaching chemicals and the environmental load of bleaching wastes were considered to improve the bleaching efficiency of thermomechanical pulp using Korean redpine(Pinus densiflora) under the peroxide-based bleaching system. The optical property of TMP after bleaching was planned to use higher grade of paper, like printing & writting paper, not general newspaper. The concentration of bleaching chemicals, NaOH, $Na_2SiO_3$ and EDTA, in hydrogen peroxide bleaching system, on the basis of O.D. pulp was closely influenced on the improvement of TMP brightness. Final target of bleaching efficiency was set up to above 76%-ISO brightness. The optimal target brightness of Korean redpine TMP was reached to 76.45%-ISO under the conditions of $H_2O_2$ 7% with NaOH 2.20%, $Na_2SiO_3$ 0.63% and EDTA 0.02%. The concentration of NaOH, $Na_2SiO_3$ and EDTA was correlated functional to the residual peroxide content of wastewater, pH value and electric conductivity of TMP fibers after bleaching treatment. The optimal bleaching conditions by controlling the addition amount of chemicals were positively contributed to the brightness stabilization and environmental load of TMP.

• Archives of Plastic Surgery
• /
• 제42권3호
• /
• pp.282-287
• /
• 2015

Background Morphological changes that accompany aging, such as wrinkles and skin laxity, are particularly prominent on facial skin. Recently, facial rejuvenation using the hydrofilling effect of hyaluronic acid (HA) filler has been employed for improvement of skin texture. In this study, we studied rejuvenating effects of stabilized HA (Restylane Vital) through direct intradermal injections. Methods A total of 30 female patients underwent a series of procedures on face, including three sessions at intervals of four weeks. A total of 2 mL of Restylane Vital was injected along the whole face using an automatic injector. Improvement of skin surface roughness, elasticity, brightness, moisture, and fine wrinkles was evaluated. Patient satisfaction was evaluated, and pictures of patients were taken at each visit and 6 months after last treatment session. Scoring for each patient was performed by three doctors according in five subjects. Moisture, oil and elasticity were measured before the procedure and before the last treatment in 10 patients. Results The majority of patients (77%) were satisfied with the therapeutic outcomes. Approximately 66% of patients responded that the effects of this procedure persisted for longer than four months, and the majority of patients (77%) wanted to undergo this procedure again and would recommend this procedure to acquaintances. Regarding doctors' evaluation, scores for improvement of skin surface roughness, elasticity, and brightness were significantly higher than those for improvement of moisture and fine wrinkle. Conclusions Intradermal injection of HA can have a rejuvenating effect on dry and tired facial skin, especially in improvement of skin surface roughness.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2001년도 춘계학술발표강연 및 논문개요집
• /
• pp.117-117
• /
• 2001

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.108-111
• /
• 2004

An efficiency and brightness of the Organic Light-emitting Diodes(OLEDs) by insertion of the novel layer between a singlet emitter and an electron transporting layer without doping processes, has been improved. The novel layers named as the K-M1 and K-M2 layers have shown the excellent improvement in the carrier balance and recombination efficiency. New devices using the K-M1 and K-M2 layers have shown a high efficiencies of over 15cd/A and 61m/W$(at\;20mA/cm^2)$, and brightness of over $16,000cd/m^2(at\;100mA/cm^2)$, respectively.

• 한국통신학회논문지
• /
• 제39A권12호
• /
• pp.699-707
• /
• 2014

최근 LED 어레이와 카메라간의 통신 (일명, 'Visual-MIMO') 연구가 활발히 진행되고 있으며, 차량 및 스마트폰 등으로의 응용이 극대화될 것으로 기대된다. 본 논문에서는 수신 영상의 휘도 정보를 이용하여 Visual-MIMO 시스템의 BER(Bit Error Rate) 성능을 개선하고자 한다. 특히 심벌간간섭 (ISI: Inter-Symbol-Interference)에 의한 오류를 최소화하고자 오류정정 방법을 제안한다. 잡음과 거리의 변화에 따른 성능 분석은 시뮬레이션과 하드웨어 실험을 통해 타당성을 검증한다.

• 펄프종이기술
• /
• 제44권5호
• /
• pp.80-86
• /
• 2012

The disposal of the bottom ash originated from a thermoelectric power plant which used the pulverized coal, has been an important issue of the power plants. In order to find the possible way of recycling of the bottom ash, the applicability of the bottom ash as an inorganic filler for paper making was investigated in this study. The pretreatment with acid were applied for upgrading the properties of bottom ash. The effects of the addition of the bottom ash to the different pulp stocks, Sw-BKP, DIP(Deinked Pulp), Sw-UBKP were evaluated in terms of the change in paper properties. The brightness and tensile strength decreased as the increase of the amount of the bottom ash addition. The bulk and the opacity were increased by the addition of bottom ash. The pretreatment of bottom ash resulted in the increase of improvement of the brightness and the strength properties comparing with those of untreated bottom ash.