• 연구논문집
• /
• s.22
• /
• pp.97-105
• /
• 1992

This study aimed to develop the heat treating equipment which could produce austenitic stainless steel welded pipes & tubes maintaining its peculiar brightness even after heat treatment. The results of this study are as follows:- Development of 8.5kHz, 150kw bright annealing system was achieved. - Bright annealing of austenitic stainless steel welded pipes & tubes was performed by the developed pilot-system through this study and heat-treatment effects were quite successful in viewpoint of surface brightness, hardness distribution, microstructure, removal of residual stress, strength and corrosion resistance.

• Journal of the Korean Society for Heat Treatment
• /
• v.18 no.4
• /
• pp.223-228
• /
• 2005

Tube hydroforming provides a number of advantages over conventional stamping process, including fewer secondary operation, weight reduction, assembly simplification, adaptability to forming of complex structural components and improved structural strength and stiffness. It can produce wide range of products such as subframe, engine cradle, and exhaust manifold. In this study, the effect of the heat treatment conditions such as post seam annealing (PSA) and bright annealing (BA) on the ovality and hydro-formability of steel tubes has been investigated. Hydroformabilities have been estimated by the bulging heights obtained at various processing parameters such as internal pressure, axial feeding and heat treatment conditions. The ovality and forming height are strongly influenced by material properties after heat treatments.

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.4
• /
• pp.228-233
• /
• 2009

In order to predict the temperature distribution of stainless steel strip in Bright Annealing (BA) furnace, we performed the analysis of heat transfer and fluid flow using STAR-CCM+. The analysis model included unsteady fluid flow, heat transfer with radiation and moving grid. Two kinds of radiative properties, emissivity and reflectivity, were applied to the stainless steel strip, one is constant and the other is variable with time. As we call, the BA furnaces of stainless steel strip have two different types, muffle and no-muffle. The using of muffle type has been faced with some problems such as rising in material price and shortening of life cycle, etc. So the development of no-muffle type BA furnace is very important in order to save energy cost, lower environmental load and increase the productivity. The designed (or expected) temperature of stainless steel strip coming out of BA furnace was about $1065^{\circ}C$ while the environment temperature maintains around $1100^{\circ}C$. The result of our calculation was very close (or similar) to design temperature, and the application of radiative properties variable with time produced more accurate result than applying constant ones.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.170-170
• /
• 1999

We studied Nb growth mode on Cu(100) surface by scanning tunneling microscopy (STM) at room temperature. Nb/Cu is immiscible at room temperature and thus is an ideal system for studying surface alloy formation. Initially deposited Nb atoms are incorporated subsurface on Cu(100). After annealing, they are preferentially found at step edges and appear as bright dots surrounded by dark rings. Ordering emerges from step edges as annealed. Ordered ({{{{ SQRT { 5} }$\times${{{{ SQRT { 5} }}}})R 26.6$^{\circ}$phase Nb structure is formed at $\theta$<0.2ML after annealing to 50$0^{\circ}C$. At higher coverage, $\theta$>0.25, annealing leads to p(2$\times$2) phase. due to large mismatch in lattice parameters, the domain is limited to a few tens of nm2. Growth kinetics of the system will be discussed.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1810-1815
• /
• 2003

Tube hydroforming provides a number of advantages over conventional stamping process, including fewer secondary operation, weight reduction, assembly simplification, adaptability to forming of complex structural components and improved structural strength and stiffness. In this study, the effect of the heat treatment on the hydro-formability has been investigated. By using the mild steel tube bulging test is performed at various heat treatment conditions to evaluate the hydro-formability.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.68-71
• /
• 2000

In this paper, we have measured the oxygen contents by FTIR in silicon wafer various process technology(slicing, lapping, polishing). The measured data are also compared with the data of etching process(KOH, Bright etching). Also we have measured the surface morpology in backside silicon wafer after etching treatment and etch pit density due to OISF after 4 step high temperature annealing process with optical microscope.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.5
• /
• pp.234-237
• /
• 2010

Nanoenergetic materials were synthesized and the thermite reaction between the CuO nanowires and the deposited nano-Al by Joule heating was studied. CuO nanowires were grown by thermal annealing on a glass substrate. To produce nanoenergetic materials, nano-Al was deposited on the top surface of CuO nanowires. The temperature of the first exothermic reaction peak occurred at approximately $600^{\circ}C$. The released heat energy calculated from the first exothermic reaction peak in differential scanning calorimetry, was approximately 1,178 J/g. The combustion of the nanoenergetic materials resulted in a bright flash of light with an adiabatic frame temperature potentially greater than $2,000^{\circ}C$. This thermite reaction might be utilized to achieve a highly reliable selective area crystallization of amorphous silicon films.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.159-159
• /
• 2000

Initial growth mode of Nb on Cu(100) is studied by scanning tunneling microscopy (STM) and density functional theory. Nb/Cu is immiscible at room temperature, but isolated Nb atoms are expected to be incorporated up to the second layer by DFT. STM shows that Nb atoms mix with Cu atoms in the first layer at room temperature and diffuse into the second layer upon annealing. In the second layer, Nb/induced features are preferentially found at step edges and appear as bright dots surrounded by dark rings. Details of comparison between experiment and theory will be discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.391.2-391.2
• /
• 2014

Solution-processible hybrid bipolar field effect transistors (HBFETs) with balanced hole and electron mobilities were fabricated using a combination of the organic p-type poly (3-hexylthiophene) (P3HT) layer and inorganic n-type ZnO material. The hole and electron mobilities were first optimized in single layer devices by using acetonitrile as a solvent additive to process the P3HT and annealing to process the ZnO layer. The highest hole mobility of the P3HT-only-devices with 5% acetonitrile was 0.15 cm2V-1s-1, while the largest electron mobility was observed in the ZnO-only-devices annealed at $200^{\circ}C$ and found to be $7.2{\times}10-2cm2V-1s-1$. The inorganic-organic HBFETs consisting of P3HT with 5% acetonitrile and ZnO layer annealed at $200^{\circ}C$ exhibited balanced hole and electron mobilities of $4.0{\times}10-2$ and $3.9{\times}10-2cm2V-1s-1$, respectively. The effect on surface morphology and crystallinity by adding acetonitrile and thermal annealing were investigated through X-ray diffraction and atomic force microscopy (AFM). Our findings indicate that techniques demonstrated herein are of great utility in improving the performance of inorganic-organic hybrid devices

• Corrosion Science and Technology
• /
• v.9 no.3
• /
• pp.109-115
• /
• 2010

Interstitial-free (IF) steels are widely used for car body material. However, a few types of streaky mark defect are commonly found on hot dip galvannealed (GA) IF steel sheets. In the present study, both the phase structure of a streaky mark defect and the microstructure of the substrate just below it were characterized by optical microscopy (OM) and scanning electron microscopy (SEM). It was found that the bright streaky mark area was composed of ${\delta}$ phase while the dark normal area was full of craters. More than half of the grains at the uppermost surface of the substrate just below the streaky mark defect are unrecrystallized grains which could result from lower finish rolling temperature during hot rolling and be kept stable during the annealing process, while almost all the grains in the normal area are equiaxed grains. In order to confirm the effect of the unrecrystallized grains on the coating morphology, hot dip galvannealing simulation experiments were carried out in IWATANI HDPS. It is proved that the unrecrystallized grains accelerate the Fe-Zn reaction rate during galvannealing and result in a flatter coating surface and an even coating thickness. Finally, a formation mechanism of the streaky mark defect on the hot dip galvannealed IF steel sheet was discussed.