• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.326-326
• /
• 2014

It has been known since the mid 1960s that Ag can be photodissolved in chalcogenide glasses to form materials with interesting technological properties. In the 40 years since, this effect has been used in diverse applications such as the fabrication of relief images in optical elements, micro photolithographic schemes, and for direct imaging by photoinduced Ag surface deposition. ReRAM, also known as conductive bridging RAM (CBRAM), is a resistive switching memory based on non-volatile formation and dissolution of a conductive filament in a solid electrolyte. Especially, Ag-doped chalcogenide glasses and thin films have become attractive materials for fundamental research of their structure, properties, and preparation. Ag-doped chalcogenide glasses have been used in the formation of solid electrolyte which is the active medium in ReRAM devices. In this paper, we investigated the nature of thin films formed by the photo-dissolution of Ag into Ge-Se glasses for use in ReRAM devices. These devices rely on ion transport in the film so produced to create electrically programmable resistance states [1-3]. We have demonstrated functionalities of Ag doped chalcogenide glasses based on their capabilities as solid electrolytes. Formation of such amorphous systems by the introduction of Ag+ ions photo-induced diffusion in thin chalcogenide films is considered. The influence of Ag+ ions is regarded in terms of diffusion kinetics and Ag saturation is related to the composition of the hosting material. Saturated Ag+ ions have been used in the formation of conductive filaments at the solid electrolyte which is the active medium in ReRAM devices. Following fabrication, the cell displays a metal-insulator-metal structure. We measured the I-V characteristics of a cell, similar results were obtained with different via sizes, due to the filamentary nature of resistance switching in ReRAM cell. As the voltage is swept from 0 V to a positive top electrode voltage, the device switches from a high resistive to a low resistive, or set. The low conducting, or reset, state can be restored by means of a negative voltage sweep where the switch-off of the device usually occurs.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.3
• /
• pp.95-100
• /
• 2015

PURPOSE: The purpose of this study is to investigate the effects of the angles of the knee and heel-off on the muscle activity during a bridge exercise. METHODS: 15 healthy adult men and women with the balance ability and joint working range required for performing a bridge exercise participated in this study, in which $120^{\circ}$, $90^{\circ}$ and $60^{\circ}$ angles of the knee-flexion and heel-off were applied during the bridge exercise. RESULTS: Our data showed that there were significant differences in muscle activities of elector spinae and rectus abdominis when $120^{\circ}$ and $60^{\circ}$ angles of the knee were applied, of internal oblique when $120^{\circ}$ and $60^{\circ}$ were applied, and external oblique when $90^{\circ}$ and $60^{\circ}$ were applied. When heel-off was applied, there were significant differences in muscle activities of elector spinae and rectus abdominis when $120^{\circ}$ and $60^{\circ}$ were applied, of internal oblique when $120^{\circ}$ and $60^{\circ}$ were applied, and external oblique when $90^{\circ}$ and $60^{\circ}$ were applied. CONCLUSION: In this study on an application of heel-off to the bridge exercise, we showed that the effect of the angles of the knee on the muscle activities of elector spinae, rectus abdominis, internal oblique and external oblique were all similar to the regular bridge exercise, but overall muscle activities were increased with heel-off when compared with the regular bridge exercise.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.5
• /
• pp.297-303
• /
• 2007

The purposes of this study were to clarify the involvement of P-glycoprotein (P-gp) in the efflux of levosulpiride in knockout mice that lack the mdr1a1b gene and to evaluate the relationship between the genetic polymorphisms in MDR1 gene (exon 21) and levosulpiride disposition in healthy Korean subjects. After oral administration ($10\;{\mu}g/g$) of levosulpiride to mdr1a/1b(-/-) and wild-type mice, plasma and brain samples were obtained at 45 min. We also investigated the genotype for MDR1 (exon 21) gene in humans using a polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) method. A single oral dose of 25 mg levosulpiride was administered to 58 healthy subjects, who were based on the MDR1 genotype for the G2677T SNP. Blood samples were taken up to 36 hr after dosing. The concentrations of levosulpiride in mouse plasma and brain were statistically significant difference between the two animal groups (P<0.05). In addition, the average brain-to-plasma concentration ratio (Kp) of levosulpiride was 3.4-fold (P<0.01) higher in the mdr1a/1b(-/-) mice compared with the wild-type mice. We also found that the values of $AUC_{0-{\infty}$, partial AUC ($AUC_{0-4h}$) and $C_{max}$ were significantly different between homozygous 2677TT subjects and the subjects with at least one wild-type allele (GG and GT subjects, P=0.012 for $AUC_{0-{\infty}$; P=0.008 for $AUC_{0-4h}$; P=0.038 for $C_{max}$). The results confirm that levosulpiride is a P-gp substrate in vivo, and clearly demonstrate the effect of SNP 2677G>T in exon 21 of the MDR1 gene on levosulpiride disposition.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.121-128
• /
• 2012

In this paper, nonlinear analysis for reinforced concrete structure for power transmission line is performed by considering the characteristics of the failure, which are depend on loading conditions and concrete material models. On the numerical evaluation for the failure behavior, the finite element analysis is applied. For the concrete material model, microplane model based on concrete damage is introduced. However, to describe the crack bridging effect of long and short fiber of steel fiber reinforced concrete (SFRC), tensile softening model is suggested and applied for SFRC. An numerical results by finite element technique are compared with the experiment results for box culvert specimen. Comparing on the experimental and analytical results, validity and reliability of numerical analysis are investigated.

• Journal of the Korean Ceramic Society
• /
• v.38 no.10
• /
• pp.936-941
• /
• 2001

The influence of the ${Al_2}{O_3}$ particle size on flaw tolerance of the $ZrO_2/{Al_2}{O_3}$ composites prepared by mixing 5.31 mol% ${Y_2}{O_3}$-4.45 mol% ${Nb_2}{O_5}$-90.31 mol% $ZrO_2$ and ${Al_2}{O_3}$ was investigated. The composites exhibited rising R-curve behavior and plateau fracture toughness of 7.9 and $8.8MPam^{1/2}$ for the additions of 20 vol% of 0.2 and $2.8{\mu}m$ ${Al_2}{O_3}$ particles, respectively. The difference in the fracture toughness resistance was attributed mainly to the grain size of tetragonal $ZrO_2$ phase in the composites, which scaled with the ${Al_2}{O_3}$ particle size.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.4
• /
• pp.141-146
• /
• 2002

The mechanical and electrical properties of the pressureless sintered SiC-TiB$_2$electroconductive ceramic composites were investigated as functions of the transition metal of TiB$_2$. The result of phase analysis for the SiC-TiB$_2$ composites by XRD revealed $\alpha$-SiC(6H), TiB$_2$, and YAG(Al$_{5}$Y$_3$O$_{12}$) crystal phases. The relative density showed the lowest 84.8% for the SiC-TiB$_2$composites added with 39vol.%TiB$_2$. Owing to crack deflection, crack bridging and YAG of fracture toughness mechanism, the fracture toughness showed the highest value of 7.8 MPa.m$^{1}$2/ for composites added with 39vol.%TiB$_2$under a pressureless annealing at room temperature. The electrical resistivity of the SiC-27vol.%TiB$_2$ composites was negative temperature coefficient resistance(NTCR), and the electrical resistivity of the besides SiC-27vol.%TiB$_2$composites was all positive temperature coefficient resistance(PCTR) in the temperature range of $25^{\circ}C$ to $700^{\circ}C$.EX>.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1545-1547
• /
• 2000

The mechanical and electrical properties of the hot-pressed and annealed $\beta$-Sic-$TiB_2$ electroconductive ceramic composites were investigated as function of the liquid forming additives of $Al_{2}O_{3}+Y_{2}O_3$. Phase analysis of composites by XRD revealed $\alpha$-SiC(6H), $TiB_2$, and YAG($Al_{5}Y_{3}O_{12}$). The relative density and the mechanical properties of composites were increased with increasing $Al_{2}O_{3}+Y_{2}O_3$ contents because YAG of reaction between $Al_{2}O_3$ and $Y_{2}O_3$ was increased. The Flexural strength showed the highest value of 432.5MPa for composites added with l2wt% $Al_{2}O_{3}+Y_{2}O_3$ additives at room temperature. Owing to crack deflection, crack bridging, phase transition and YAG of fracture toughness mechanism. the fracture toughness showed 7.1MPa${\cdot}m^{1/2}$. For composites added with l2wt% $Al_{2}O_{3}+Y_{2}O_3$ additives at room temperature The electrical resistivity and the resistance temperature coefficient respectively showed the lowest of 6.0${\sim}10^{-4}{\Omega}{\cdot}$ cm and 3.1${\times}10^{-3}/^{\circ}C$ for composite added with l2wt% $Al_{2}O_{3}+Y_{2}O_3$ additives at room temperature. The electrical resistivity of the composites was all positive temperature coefficient resistance(PTCR) in the temperature range of 25$^{\circ}C$ to 700$^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1474-1476
• /
• 2000

The mechanical and electrical properties of the hot-pressed and annealed $\beta$-Sic-$ZrB_2$ electroconductive ceramic composites were investigated as function of the liquid forming additives of $Al_{2}O_{3}+Y_{2}O_{3}$. Phase analysis of composites by XRD revealed $\alpha$-SiC(6H), $ZrB_2$, and YAG($Al_{5}Y_{3}O_{12}$). The relative density of composites were increased with increasing $Al_{2}O_{3}+Y_{2}O_{3}$ contents. The flexural strength showed the highest value of 390.6MPa for composites added with 20wt% $Al_{2}O_{3}+Y_{2}O_{3}$ additives at room temperature. Owing to crack deflection, crack bridging. phase transition and YAG of fracture toughness mechanism. the fracture toughness showed the highest value of 6.3MPa${\cdot}m^{1/2}$ for composites added with 24wt% $Al_{2}O_{3}+Y_{2}O_{3}$ additives at room temperature. The electrical resistivity of the composites was all positive temperature coefficient resistance (PTCR) in the temperature range of 25$^{\circ}C$ to 900$^{\circ}C$.

• Lingua Humanitatis
• /
• v.1 no.2
• /
• pp.179-196
• /
• 2001

According to Formalist theory, form is not separate from content. Form does not merely convey or express content but can itself produce meaning. The close correlation of the narrative structure, more specifically the time structure of the narrative, and the narrative style of Kim Seung-Ok′s short story′"Travel in Mujin" provides a good example of this argument. The story opens with the first-person narrator, currently living in the bustling city of Seoul, back in his small provincial home town Mujin, where he brings up memories that had been hitherto suppressed. The revived memories are ordered into the narrator′s present thought structure, in effect bridging the vast psychological rift between the lost past and the present. The narrator′s travel in Mujin thus becomes a psychological journey, and Mujin becomes a psychological space where the narrator can experience the continuity of his own being. The "narrating I" excludes the principles of reality from his narrative, concentrating on the inner thoughts, recollections, psychological experience, and the level of consciousness of the "narrated I." This narrative attitude or style expresses the narrator-protagonist′s acceptance and affirmation of the thoughts and actions occur in Mujin (which he had till now been resistant to). It is also an affirmation of the narrative act itself. Before the travel back to Mujin, the narrator-protagonist′s thoughts about his home town was ambivalent-an attitude originating from nostalgia, together with the narrator-protagonist′s ambivalent attitude toward his youthful past. It is a reflection of the narrator-protagonist′s desire for purity intermingled with a disdain for his enervated existence in Seoul. This ambivalence is resolved by the "I" of the narrative present, and Mujin enables him to come to a renewed affirmation of his life.

• Structural Engineering and Mechanics
• /
• v.12 no.6
• /
• pp.657-668
• /
• 2001

Fiber reinforced cementitious composites are nowadays widely applied in civil engineering. The postcracking performance of this material depends on the interaction between a steel fiber, which is obliquely across a crack, and its surrounding matrix. While the partly debonded steel fiber is subjected to pulling out from the matrix and simultaneously subjected to transverse force, it may be modelled as a Bernoulli-Euler beam partly supported on an elastic foundation with non-linearly varying modulus. The fiber bridging the crack may be cut into two parts to simplify the problem (Leung and Li 1992). To obtain the transverse displacement at the cut end of the fiber (Fig. 1), it is convenient to directly solve the corresponding differential equation. At the first glance, it is a classical beam on foundation problem. However, the differential equation is not analytically solvable due to the non-linear distribution of the foundation stiffness. Moreover, since the second order deformation effect is included, the boundary conditions become complex and hence conventional numerical tools such as the spline or difference methods may not be sufficient. In this study, moment equilibrium is the basis for formulation of the fundamental differential equation for the beam (Timoshenko 1956). For the cantilever part of the beam, direct integration is performed. For the non-linearly supported part, a transformation is carried out to reduce the higher order differential equation into one order simultaneous equations. The Runge-Kutta technique is employed for the solution within the boundary domain. Finally, multi-dimensional optimization approaches are carefully tested and applied to find the boundary values that are of interest. The numerical solution procedure is demonstrated to be stable and convergent.