• 전력전자학회논문지
• /
• 제10권4호
• /
• pp.356-362
• /
• 2005

본 논문에서는 외부 이그니터가 없는 간단한 고효율 안정기를 만들기 위해 커플 인덕터와 주파수가변. 동기 정류기를 이용한 하프 브리지 방식의 안정기를 제안한다. 램프 점등시 고압을 발생시키기 위해 벅 컨버터 내부의 LC 공진이 사용되었고, 정상상태의 리플을 줄이기 위해 커플 인덕터가 사용되었다. DC/DC컨버터로는 동기형 벅 컨버터가 사용되었다. 안정기의 효율을 높이기 위해 가변 주파수 방식을 제안하였다. 이 방식은 순환 전류와 정전력 동작 하에서 MOSFET 스위치의 턴 오프 손실을 감소 시켜 고정 주파수 방식에 비해 안정기 효율을 약 4$\%$ 향상 시킨다. 회로 구성은 PFC와 안정기 2단으로 구성된다 결과는 실험을 통하여 검증된다.

• 한국항행학회논문지
• /
• 제26권2호
• /
• pp.99-104
• /
• 2022

최근 국내에서도 항공기 플랫폼을 기반으로 한 무기체계 수요는 점진적으로 증가 추세이다. 특히 지상 요격 용도로 항공기에 장착되어 발사 후 수백 킬로미터를 순항한 뒤 표적에 침투하는 유도탄의 수요가 높지만 개발 초기단계이며 그에 따른 연구와 자료 역시 제한적이다. 본 논문은 항공기 플랫폼에 장착 할 공대지 유도탄의 전력변환장치(PCU)에 대한 연구이며 항공기와 유도탄 간 인터페이스인 MIL-STD-1760 기반, 배꼽 연결기의 특성과 구조 그리고 항공기와 전기적 연동 체계에 대해 확인한다. 또한 주요 기능인 유도탄 구성품에 전원을 공급해주는 전력변환장치 설계 사양을 언급하였고, 항공기 장착 상태에서 유도탄 전원 입력 조건이 되는 3상 교류 입력을 모의하여 PFC를 이용한 정류 방식과 브릿지 정류회로를 이용한 정류 방식 결과를 비교 하였다. 이는 추후 개발 될 항공기 장착 무기 체계의 전력변환장치 설계 기초 자료로 사용 될 수 있을 것이다.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1782-1789
• /
• 2008

This paper presents the design of acoustic resonance(AR) free and dimmable electronic ballast for 1kW Metal-Halide Lamp(MHL). The proposed Ballast consists of a Full-Bridge(FB) rectifier, a passive power factor correction(PFC) circuit, a full-bridge inverter, an ignitor using LC resonance and a control circuit for frequency modulation and dimming control. Whereas a passive PFC provides advantages in terms of high reliability and low cost for constructing the circuit, it is difficult to supply a stable voltage because of the output voltage ripple that occurs with a period of 120Hz. Although the ballast can be designed with a small size and a light weight if it is driven at a switching frequency between 1 and 100 kHz, AR will occur if the eigenvalue frequency of the lamp coincides with the inverter's operation frequency. The operation frequency was modulated in real time according to the output voltage ripple to compensate for the variation in power supplied to the lamp and eliminate AR. For dimming, the method, which modulated drive frequency of FB inverter using the control of DC level by microprocessor, was used. The Dimming ranged at least from 600W to 1kw as rated power of the lamp with 4 stages. Performance of the proposed technique was validated through numerical analysis, computer simulation using Pspice and by applying it to an electronic ballast for a prototype 1kW MHL.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.464-472
• /
• 2016

This study applies the selective harmonic elimination (SHE) technique to design and operate a regulated AC/DC/AC power supply suitable for maritime military applications and underground trains. The input is a single 50/60 Hz AC voltage, and the output is a 400 Hz regulated voltage. The switching angles for a multi-level inverter and transformer turns ratio are determined to operate with special connected transformers with equal power ratings and produce an almost sinusoidal current. As a result of its capability of directly controlling harmonics, the SHE technique is applicable to apparatus with congenital immunity to specific harmonics, such as series-connected transformers, which are specially designed to equally share the total load power. In the present work, a single-phase 50/60 Hz input source is rectified via a semi-controlled bridge rectifier to control DC voltage levels and thereby regulate the output load voltage at a constant level. The DC-rectified voltage then supplies six single-phase quazi-square H-bridge inverters, each of which supplies the primary of a single-phase transformer. The secondaries of the six transformers are connected in series. Through off-line calculation, the switching angles of the six inverters and the turns ratios of the six transformers are designed to ensure equal power distribution for the transformers. The SHE technique is also employed to eliminate the higher-order harmonics of the output voltage. A digital implementation is carried out to determine the switching angles. Theoretical results are demonstrated, and a scaled-down experimental 600 VA prototype is built to verify the validity of the proposed system.

• 한국산학기술학회논문지
• /
• 제9권3호
• /
• pp.638-644
• /
• 2008

슬립램프의 응용은 소형으로 디자인되는 원리를 이행하므로 작은 사이즈의 전자식 안정기가 요구된다 하지만 기존의 $50{\sim}60Hz$에서 동작되는 자기석 안정기들은 현저한 플리커(깜빡거림) 현상, 높은 손실, 큰 파고율 그리고 무거운 단점을 가지고 있다. 본 연구에서는 이러한 문제들을 해결하기 위해서 35W급(T5급) 형광등을 동작시키기 위한 제안된 새로운 타입으로 구성된 전자식 안정기로 정류기, 역률개선, 직렬 공진 하프 브리지 인버터 그리고 압전 변압기를 구성한 시스템을 제안하였다. 이 같은 압전 변압기를 이용한 전자식 안정기 구성으로 35급(T5급) 형광등을 성공적으로 동작시킬 수 있었다. 제안된 전자식 안정기를 약 $75{\sim}79kHz$의 주파수로 구동 시켜서 실험한 결과 25분 구동 후에 형광램프는 시스템 전체 안정기의 역률과 효율은 각각 0.95, 0.86%의 양호한 결과를 얻을 수 있었다.

• 전력전자학회논문지
• /
• 제21권5호
• /
• pp.453-456
• /
• 2016

The major causes of electrical fire in low-voltage distribution lines are classified into short-circuit fault, overload fault, electric leakage, and electric contact failure. The special principal factor of the fire is electric arc or spark accompanied with such electric faults. This paper studies the development of an electric fire prevention system with detection and alarm of that in case of parallel arc fault occurrence in low-voltage distribution lines. The proposed system is designed on algorithm sensing the instantaneous voltage drop of line voltage at arc fault occurrence. The proposed detector has characteristics of high-speed operation responsibility and superior system reliability from composition using a large number of semiconductor devices. A new sensing control method that shows the detection of parallel arc fault is sensed to ripple voltage drop through a diode bridge full-wave rectifier at electrical accident occurrence. Some experimental tests of the proposed system also confirm the practicality and validity of the analytical results.

• 전력전자학회논문지
• /
• 제21권4호
• /
• pp.351-355
• /
• 2016

Welding machines are high-capacity systems used in a low-frequency range using IGBT. As their system is similar to a large transformer, most welding machines suffer a great loss because of hard switching and vast leakage inductance. A voltage-balancing circuit is designed to overcome these shortcomings. This circuit can reduce the transformer size by making it into a high frequency and reducing the input voltage by half and by adopting a serial structure that connects two full-bridges in a series to use a MOSFET with a good property at high frequency. In addition, a Schottky diode is used in the primary rectifier to overcome the low efficiency of most welding machines. To use the Schottky diode with a reliably relatively low withstanding voltage, an active snubber is adopted to effectively limit the ringing voltage of the diode cut-off voltage.

• 조명전기설비학회논문지
• /
• 제19권6호
• /
• pp.16-21
• /
• 2005

본 논문에서는 고주파 트랜스의 여자 전류를 이용하지 않고, 인덕턴스를 이용한 새로운 부분공진 영전압 스위칭 PWM제어 고주파 절연형 풀-브리지 DC/DC 컨버터의 회로를 제안하여 그 동작 원리를 기존 방식과 특성을 비교하였다. 또한 고주파 절연 트랜스 2차측에 동기 정류용 전력용 MOSFET에 새로운 기능을 부가한 온-오프 제어방식을 이용하여 넓은 부하 범위에 걸쳐 안정된 영전압 스위칭(ZVS)동작을 실현하였다. 또한 제안한 DC-DC 컨버터의 실험장치에 의해서 실측 효율을 97[%]이상 달성하였고 직류 무정전전원의 PWM 정류기의 출력단에 이용되는 새로운 방식이 스위칭 전원으로서 유효성을 증명하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.429-430
• /
• 2011

This paper presents a simple and cost-effective stand-alone rapid battery charging system of 30kW for electric vehicles. The proposed system mainly consists of active front-end rectifier of neutral point clamped 3-level type and non-isolated bi-directional dc-dc converter of multi-phase interleaved half-bridge topology with coupled inductors. The charging system is designed to operate for both lithium-polymer and lithium-ion batteries. The complete charging sequence is made up of three sub-interval operating modes; pre-charging mode, constant-current mode, and constant-voltage mode. The pre-charging mode employs the staircase shaped current profile to accomplish shorter charging time while maintaining the reliable operation of the battery. The proposed system is able to reach the full-charge state within less than 16min for the battery capacity of 8kWh by supplying the charging current of 67A. The optimal discharging algorithm for Vehicle to the Grid (V2G) operation has been adopted to maintain the discharging current of 1C. Owing to the simple and compact power conversion scheme, the proposed solution has superior module-friendly mechanical structure which is absolutely required to realize flexible power expansion capability in a very high-current rapid charging system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.65-67
• /
• 2003

This paper describes a design of power supply for electrodeless lamp system to be easy to control electric power widely keeping the high power factor. Proposed system is composed of power factor correction(PFC) circuit, half bridge(HB) inverter, high voltage transformer, full wave rectifier to supply dc number kV's magnetron(MGT) anode voltage in the second of high voltage transformer and magnetron. It was confirmed that the proposed circuits can correct the 99.8[%] power factor and control input power of the magnetron up to 33.3[%] linearly by adjusting of pulse frequency of the inverter through the experiment.