• Nuclear Engineering and Technology
• /
• 제40권3호
• /
• pp.199-212
• /
• 2008

A small-break loss of coolant accident (SB-LOCA) test with a break size equivalent to a 3-inch cold leg break of the APR1400 was carried out as the first transient integral effect test using the ATLAS (Advanced Thermal-hydraulic Test Loop for Accident Simulation). This was the first integral effect test to investigate the integral performance of the test facility and to verify its simulation capability for one of the design-basis accidents. Reasonably good thermal hydraulic data was obtained so that an integral performance of the fluid sub-systems was identified and control performance of the ATLAS was confirmed under real thermal hydraulic conditions. Based on the measured data, a post-test calculation was carried out using the best-estimate thermal hydraulic safety analysis code, MARS 3.1, and the similarity between the expected and actual data was investigated. On the whole, the post-test calculation reasonably predicts the major thermal hydraulic parameters measured during the SB-LOCA test. The obtained data will be used to enhance the simulation capability of the ATLAS and to improve an input model of the ATLAS for simulation of other target scenarios.

• 한국수자원학회논문집
• /
• 제39권5호
• /
• pp.383-394
• /
• 2006

도시하천유역에서 집중호우에 따른 제방 범람과 이에 따른 침수 피해규모를 해석하기 위하여 우리나라의 대표적 도시하천인 중랑천의 홍수 및 제방붕괴 특성을 시 공간적으로 다양한 조건에서 연구하였으며 실용적인 GIS 기법의 적용방법에 대하여 비교 분석하였다. 이를 위하여 '98년 실제 홍수상황에 대하여 적용분석하였으며, 100년, 200년, PMP의 빈도별 강우 조건에서 홍수량을 각각 산정하였다. 또한, 제방붕괴 조건별 하천의 부정류 해석 및 제내지의 홍수범람해석을 실시하였다. 제방붕괴의 조건으로서 붕괴시간(10, 30, 60분), 붕괴폭(10, 20, 30m) 및 제방붕괴위치(중상류부, 중류부, 중하류부) 등에 따른 홍수위, 월류량 및 제내지 침수 수위 변화 등을 검토한 결과, 제방붕괴의 위치 및 붕괴폭이 홍수범람규모와 침수피해에 큰 영향을 주는 것으로 분석되었다. 또한 FLDWAV에 의한 산정결과를 이용한 홍수범람지도 작성과정에서 WS와 ArcView 모형의 두 모형을 적용하는 과정을 비교하였다 WMS 모형은 비교적 간략한 절차를 통하여 작성할 수 있었으나 지형자료의 부정확성으로 말미암아 침수면적에 상당한 차이를 나타내었다. ArcView모형은 보다 정밀한 범람도를 형성하여 도시유역 등의 적용에 유용할 것으로 판단되나 WMS 모형을 통한 전처리 과정이 필요하여 처리시간이 보다 긴 단점이 있다. 본 연구에서 제시한 분석절차는 도시하천유역의 EAP(Emergency Action Plan, 비상대처계획)수립을 위한 실용적 수문 수리 및 GIS 분석에 기여할 수 있을 것으로 판단된다.

• 수산경영론집
• /
• 제9권2호
• /
• pp.59-89
• /
• 1978

The analyzed results of the actual state of stow net fishery based on the cost expended are as follows. According to the calculation of interests, the total cost of this fishery comes to ￦38,010,653 and in this account, the production cost comes to ￦35,477,198(93.3%), the material cost, 14,567,239(38.3%), the labour cost, 12,740,274(33.5%), the expenses, ￦8,169,685(21.5%), the commision and administration expenses, 2,533,455(6.7%). The expenses for this fishery are paid out as production costs, and the expenses for sale and administration expenses are the lowest of them, and the 93% of expenses are paid out as production costs. The ratio of cost element to 100% is as follow. The wages, 28.4%, fuel, 15.2%, repair, 11.6%, deprecation, 9.5%, fishing gear, 8.7%, ice, 6.1%, container(box for fish), 5.2% administration expenses, 5.2%, food, 3.5%, ship grar, 3.2%, public welfare, 1.7%, commision for sale, 1.5%, insurance for crew, 0.2%, taxes, 0.2%. This fishery is managed with the larger fishing boat than it was and so, it demands better crews with higher wages. In the former fishery, the search for fishing ground is very difficult with long navigation and great fuel consumption. when the weak fishing gears are used, the expenses for their repair and for their gears are greatly paid out. The unit costs of catches to each box come to ￦2.807(￦187 each kg). As the ratio of cost of sales comes to 86.7%and the ratio of interests comes to ￦5,850,812(13.3%), and so the net profit comes to 13.3% of total profits. According to above the ratio of cost of sales is shown as a universal validity, Asthe total expenses comes to 86.7% to the money on sales in the break-even point, the break-even point comes to ￦26,209,168 Accordingly for the profit control the account of production should be raised, and by the saving method of expenditure the break-even point should be brought down for the development of total profits.

• Fisheries and Aquatic Sciences
• /
• 제1권1호
• /
• pp.48-62
• /
• 1998

Seasonal volume transport on the Texas-Louisiana continental shelf is investigated in terms of objectively fitted transport streamfunction fields based on the current meter data of the Texas­Louisiana Shelf Circulation and Transport Processes Study. Adopted here for the objective mapping is a method employing a two-dimensional truncated Fourier representation of the streamfunction over a domain, with the amplitudes determined by least square fit of the observation. The fitting was done with depth-averaged flow rather than depth-integrated flow to reduce the root-mean-square error. The fitting process filters out $11\%$ of the kinetic energy in the monthly mean transport fields. The shelf-wide pattern of streamfunction fields is similar to that of near-surface velocity fields over the region. The nearshore transport, about 0.1 to 0.3 Sv $(1 Sv= 10^6\;m^3/sec)$, is well correlated with the seasonal signal of along-shelf wind stress. The spring transport is weak compared to other seasons in the inner shelf region. The transport along the shelf break is large and variable. In the southwestern shelf break, transport amounts up to 4.7 Sv, which is associated with the activities of the encroaching of energetic anticyclonic eddies originated in Loop Current of the eastern Gulf of Mexico. The first empirical orthogonal function (EOF) of streamfunction variability contains $67.3\%$ of the variance and shows a simple, shelf-wide, along-shelf pattern of transport. The amplitude evolution of the first EOF is highly correlated (correlation coefficient: 0.88) with the evolution of the along-shelf wind stress. This provides strong evidence that the large portion of seasonal variation of the shelf transport is wind-forced. The second EOF contains $23.7\%$ of the variance and shows eddy activities at the southwestern shelf break. The correlation coefficient between the amplitudes of the second EOF and wind stress is 0.42. We assume that this mode is coupled a periodic inner shelf process with a non-periodic eddy process on the shelf break. The third EOF (accounting for $7.2\% of the variance) shows several cell structures near the shelf break associated with the variability of the Loop Current Eddies. The amplitude time series of the third EOF show little correlation with the along-shelf wind.

• 한국음향학회지
• /
• 제16권1호
• /
• pp.24-32
• /
• 1997

이 논문에서는 첫 번째로 운율구 경계를 자동으로 추출하고자 할 때 인간의 지각과 관련하여 어떠한 자질을 이용하는 것이 좋은가 하는 점을 밝혀 보았다. 운율구 경계의 유형은 크게 경계가 없는 강도(zero), 약한 경계 강도(minor break strength), 강한 경계 강도(major break strength) 3 단계로 정하는 것이 통계적으로 의의가 있으며 지속시간의 정보가 강한 경계 유형의 결정에 중요하게 작용하는 자질이었음을 알 수 있었다. 두 번째로는 운율구 경계현상 분석결과를 바탕으로 운율구 경계의 경계 강도를 약한 경계 강도(zero를 포함)와 강한 경계 강도로 나누고, 2단계의 경계 강도를 텍스트상에서 문장성분의 bigram, trigram을 정보를 이용하여 자동으로 할당하였다. Bigram의 경우 Test-I, Test-II 텍스트 DB에 대해 각각 46.0%, 38.2%의 강한 경계 강도 예측정확률과 22.8%, 8.4%의 삽입오류율의 성능을 내었으며, Trigram인 경우 Test-I, Test-II 텍스트 DB 각각에 대해 58.3%, 42.8%의 강한 경계 강도 예측정확률과 30.0%, 11.8%의 삽입오류율를 나타냈다.

• Nuclear Engineering and Technology
• /
• 제47권6호
• /
• pp.712-718
• /
• 2015

Cast duplex stainless steels are susceptible to thermal aging during long-term service at temperatures ranging from $280^{\circ}C$ to $450^{\circ}C$. To analyze the effect of thermal aging on leak-before-break (LBB) behavior, three-dimensional finite element analysis models were built for circumferentially cracked pipes. Based on the elasticeplastic fracture mechanics theory, the detectable leakage crack length calculation and J-integral stability assessment diagram approach were carried out under different bending moments. The LBB curves and LBB assessment diagrams for unaged and thermally aged pipes were constructed. The results show that the detectable leakage crack length for thermally aged pipes increases with increasing bending moments, whereas the critical crack length decreases. The ligament instability line and critical crack length line for thermally aged pipes move downward and to the left, respectively, and unsafe LBB assessment results will be produced if thermal aging is not considered. If the applied bending moment is increased, the degree of safety decreases in the LBB assessment.

• Journal of Biosystems Engineering
• /
• 제10권2호
• /
• pp.27-35
• /
• 1985

This study was carried out to determine the optimum size and number of farm machines for various sizes of land coverage of the cooperative farm machinery utilization systems in Korea-namely Saemaul Mechanized Farming Group (SMFG). Fifty-one SMFG were selected from 8 counties in Chonnam province, and ownership, operation and management of farm machinery were surveyed. Annual covered area, cost and the break-even-point area of farm machinery were analyzed on the bases of the surveyed data and the present governmental subsidy policy, and then the optimum level of farm machinery ownership was determined. The results are summarized as follows: 1. The break-even-point areas of the tractors of 22-23ps, 28ps and 47-50ps were estimated as 12.1ha, 15.3ha and 21.6ha, respectively. The optimum size of a tractor for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 22-23ps, 28ps, and 47-50ps, respectively. 2. The break-even-point area of a rice transplanter was estimated as 3.3ha. The optimum numbers of rice transplanter for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 2,3, and 4, respectively. 3. The break-even-point areas of a speed sprayer (attached on power tiller) and a power sprayer were estimated as 114.6ha and 15.3ha, respectively. The optimum numbers of power sprayer for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 2,3 and 4, respectively. A speed sprayer is desirable for an area of more than 30ha coverage. 4. The break-even-point area of a combine was estimated as 10.7ha. The optimum numbers of combine for land sizes of 10-20ha, 20-30ha, and 30-40ha were estimated as 1,2, and 3, respectively.

• Nuclear Engineering and Technology
• /
• 제41권5호
• /
• pp.655-676
• /
• 2009

The first-ever integral effect test for simulating a guillotine break of a DVI (Direct Vessel Injection) line of the APR1400 was carried out with the ATLAS (Advanced Thermal-hydraulic Test Loop for Accident Simulation) from the same prototypic pressure and temperature conditions as those of the APR1400. The major thermal hydraulic behaviors during a DVI line break accident were identified and investigated experimentally. A method for estimating the break flow based on a balance between the change in RCS inventory and the injection flow is proposed to overcome a direct break low measurement deficiency. A post-test calculation was performed with a best-estimate safety analysis code MARS 3.1 to examine its prediction capability and to identify any code deficiencies for the thermal hydraulic phenomena occurring during the DVI line break accidents. On the whole, the prediction of the MARS code shows a good agreement with the measured data. However, the code predicted a higher core level than did the data just before a loop seal clearing occurs, leading to no increase in the peak cladding temperature. The code also produced a more rapid decrease in the downcomer water level than was predicted by the data. These observable disagreements are thought to be caused by uncertainties in predicting countercurrent flow or condensation phenomena in a downcomer region. The present integral effect test data will be used to support the present conservative safety analysis methodology and to develop a new best-estimate safety analysis methodology for DVI line break accidents of the APR1400.

• 대한통합의학회지
• /
• 제2권1호
• /
• pp.91-100
• /
• 2014

Purpose : The purpose of this study was to know the influence of the difference in shoulder slope from balance training. Method : Training was divided that the 10 people were a Trampoline group, 10 people were a Togu group, 8 people were a Balance Board group and 9 people were a Control group. Method of the training was that the Trampoline group was carried out on the Trampoline. The training was carried out totally 2 times of 8 set per a week and had a break time during 10 seconds after carried out 30 seconds per one set. Togu group was carried out totally 2 times of 5 minutes per a week and had a break time during 30 seconds after carried out 2 minutes per one set. Balance Board group was carried out totally 2 times of 5 minutes per a week and had a break time 30 seconds after carried out 2 minutes per one set. Data was analyzed by repeated measure of one way ANOVA and repeated measure ANOVA. Result : The shoulder of the slope difference decreased significantly after balance training. The Trampoline group decreased from $3.13{\pm}1.01$ to $2.37{\pm}1.11$, the Togu group decreased from $3.78{\pm}0.85$ to $3.78{\pm}0.85$, the Balance Board group decreased from $1.78{\pm}0.82$ to $1.65{\pm}0.59$ and the Control group decreased from $1.77{\pm}1.16$ to $1.61{\pm}0.62$. Conclusion : The effectiveness improved in the order Togu group, Trampoline group, Balance Board group and Control group from the result of the balance training about difference of slope shoulder.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.279-290
• /
• 2010

In this paper, a VOF method called RHRIC (refined high resolution intertace capturing) is introduced for solving the motion of the free surface and applied to the simulation of the advection of rigid interiaces of different shapes and a 20 dam-break problem, which are typical benchmark test cases. The numerical results for the interface advection cases are compared to the analytic solutions, while the available experimental data and other numerical results of various free surface methods for the dam-break problem are provided for the validation of the proposed VOF method. The same simulations were also carried out using the original HRIC scheme and a modified HRIC scheme called MHRIC for comparison. Although the RHRIC uses a simple order scheme, a basis of the original HRIC scheme, lower than the third-order ULTIMATE-QUICKEST used by the MHRIC, it provides an improved accuracy over the two previous HRIC methods.