• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.54.2-54.2
• /
• 2011

We present a study of HII regions in M51 using HST/ACS images taken as part of the Hubble Heritage Program. We found about 19,600 HII regions in M51 with $H_{\alpha}$ luminosity in the range of $L=10^{35.5}-10^{39.0}\;erg\;s^{-1}$. The $H_{\alpha}$ luminosity function of HII regions (HII LF) in M51 is well represented by a double power law with its index ${\alpha}=-2.25{\pm}0.02$ for the bright part and ${\alpha}=-1.42{\pm}0.01$ for the faint part, separated at a break point $L=10^{37.1}\;erg\;s^{-1}$. Comparison with simulated HII LFs suggests that this break is caused by the transition of HII region ionizing sources, from low-mass clusters (including several OB stars) to more massive clusters (including several tens of OB stars). The HII LFs with L < $10^{37.1}\;erg\;s^{-1}$ are found to have different slopes for different parts in M51: the HII LF for the interarm region is steeper than those for the arm and the nuclear regions. This observed difference in HII LFs can be explained by evolutionary effects: HII regions in the interarm region are relatively older than those in the other parts of M51. The size distribution of the HII regions is fitted by a double power law with a break at D = 30 pc. The power law index for the small HII regions with 15 pc < D < 30 pc is ${\alpha}=-1.78{\pm}0.04$, whereas ${\alpha}=-5.04{\pm}0.08$ for the large HII region with 30 pc < D < 110 pc. The power law indices of the size distribution are related with those of HII LF, and the relation between the luminosities and sizes of HII regions is fitted well by $L{\propto}D^{3.04{\pm}}$.

• Journal of Forest and Environmental Science
• /
• v.25 no.2
• /
• pp.111-118
• /
• 2009

Multiple shoot induction and plant regeneration using apical bud and nodal explants of 100 year old tree of Anthocephalus cadamba, an important sacred and medicinal tree in India was achieved for the first time. Aseptic explants cultured in Murashige and Skoog (MS) medium augmented with different concentrations of BAP (0.1, 0.5, 1.0, 2.5, 5.0 and 10 mg/l), when maintained for 60 days, healthy shoots were induced in presence of BAP (1 mg/l). Lower concentrations of BAP (0.1 - 0.5 mg/l) induced only one shoot per explant. Increase in number of shoots per explant was observed in presence of higher concentrations of BAP (2.5, 5.0 and 10 mg/l). However, elongation of shoots was completely inhibited. Bud break and shoot regeneration was largely associated with seasonal factors. Apical buds cultured during June to August exhibited early bud break within two weeks of initial culture. In rest of the months, bud break and shoot regeneration was very slow irrespective of the various concentrations of BAP used in the medium. Explants sourced from three different maturity levels of shoots indicated that actively growing shoots from the mother plant with 1 - 2 nodal segments was more suitable for culture initiation than the explants collected from mature shoots at dormant stage. Regenerated shoots with 2 - 3 pairs of leaves when transferred to half strength MS medium fortified with IBA (1 mg/l), 60% of the shoots induced healthy roots, indicating the possibility of large scale micropropagation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.651-659
• /
• 2011

With the increase in the thermal power output of recently developed nuclear power plants, the applied forces and moments are increased in some piping systems, so that the leak-before-break (LBB) application criteria would not be satisfied in those pipes. In this paper, we present a method for obtaining the additive LBB margin in the pipes by considering the nonlinearity of the crack and material properties. Finite element analysis and the moment-rotation equation of beam theory were used to calculate the nonlinearity of the crack and material properties. Moreover crack stability analysis was performed using the method proposed in this study. The LBB margin was increased effectively through consideration of the nonlinearity of the crack and material properties in the pipe.

• Korea-Australia Rheology Journal
• /
• v.20 no.3
• /
• pp.109-116
• /
• 2008

The effect of intermolecular aggregation induced by hydrophobic and electrostatic interactions on shear and elongational flow properties of aqueous acrylic thickener solutions is discussed. Complex shear modulus is determined at frequencies up to $10^4$ rad/s employing oscillatory squeeze flow. Extensional flow behavior is characterized using Capillary Break-up Extensional Rheometry. Aqueous solutions of poly(acrylic acid)(PAA)/poly(vinylpyrrolidone-co-vinylimidazole) (PVP-VI) mixtures exhibit unusual rheological properties described here for the first time. Zero-shear viscosity of the mixtures increases with decreasing pH and can exceed that of the pure polymers in solution by more than two orders of magnitude. This is attributed to the formation of complexes induced by electrostatic interactions in the pH range, where both polymers are oppositely charged. PAA/PVP-VI mixtures are compared to the commercial thickener Sterocoll FD (BASF SE), which is a statistical co-polymer including (meth) acrylic acid and ethylacrylate (EA) forming aggregates in solution due to "sticky" contacts among hydrophobic EA-sequences. PAA/PVP-VI complexes are less compact and more deformable than the hydrophobic Sterocoll FD aggregates. Solutions of PAA/PVP-VI exhibit a higher zero-shear viscosity even at lower molecular weight of the aggregates, but are strongly shear-thinning in contrast to the weakly shear-thinning solutions of Sterocoll FD. The higher ratio of characteristic relaxation times in shear and elongation determined for PAA/PVP-VI compared to Sterocoll FD solutions reflects, that the charge-induced complexes provide a much stronger resistance to extensional flow than the aggregates formed by hydrophobic interactions. This is most likely due to a break-up of the latter in extensional flow, while there is no evidence for a break-up of complexes for PAA/PVP-VI mixtures. These flexible aggregates are more suitable for the stabilization of thin filaments in extensional flows.

• The Journal of Korean Society for Radiation Therapy
• /
• v.4 no.1
• /
• pp.71-77
• /
• 1990

The present study was undertaken to investigate effects of ionizing radiation on DNA synthesis and chromosomal abnormality in cultured submandibular gland(SG) cells. SG cells from C57BL/6N Crj mice were cultured in Dulbecco's modified Eagle's medium (DME) supplemented with $10\%$ fetal bovine serum, antibiotics and fungizone. The cultured SG cells were irradiated with graded doses of gamma ray ($^{60}Co$) at a dose rate of 58.4rad/min. The effect of irradiation of $^{60}Co$ on DNA synthesis in cultured cells was evaluated by measuring the incorporation of 3H-TdR. Using conventional chromosome techniques and Giemsa staining methods, chromosomal abnormalities in cultured SG cells, induced by irradiation of $^{60}Co$ werw examined. Cytological observations were carried out by a light microscope with high resolving power. The results obtained were as follows : 1. DNA synthesis of SG cells was quantitatively dependent on a radiation dose compare to control. 2. A polyploids and few chromosome-type break, such as single and double breaks, deltions and triradial figures were more predominantly in irradiated SG cells than in control. This increase of chromosomal abnormality was in the proposition to the irradiation doses.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.403-408
• /
• 1996

The subchannel analysis was performed to verify the behavior of hot channel characteristics and obtain the information to support the core thermal-hydraulic behavior at post-trip steam line break with low flow condition. During this postulated accident, buoyancy-induced cross flow occurs, and the coupled nuclear and thermal-hydraulic interactions become important. The code predictions with TORC are in good agreement with the test data. Under such conditions, the mass flow increase in the hot channel by buoyancy-induced cross flow depends on the parameter $GR^{*}\;/\;Re^2$, and buoyancy effect becomes more noticeable as $GR^{*}\;/\;Re^2$ increases.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.4
• /
• pp.15-21
• /
• 2007

The effect of manufacturing parameters on friction characteristics of motorcycle break system was studied using a disk-on-pad type friction tester. Such parameters conditions have an effect on the frictional factor such as number of ventilated disk hole, applied load, sliding speed, and sliding distance. However, it is difficult to know the mutual relation of these factors. In this study, the friction characteristics using design of experiment containing 4 elements were investigated for an optimal condition for the best motorcycle break system employing regression analysis method. From this study, the result was shown that the applied load in frictional factors was the most important, next to sliding speed, number of ventilated disk hole.

• Journal of the Korean Chemical Society
• /
• v.59 no.1
• /
• pp.18-21
• /
• 2015

We use a scanning tunneling microscope based break-junction technique to measure the conductance of a 4,4'-dimethoxybiphenyl molecular junction formed with Ag and Au electrodes. We observe the formation of a clear molecular junction with Ag electrodes that result from stable Ag-oxygen bonding structures. However we have no molecular bonding formation when using Au electrodes, resulting in a tunneling current between the top and bottom metal electrodes. We also see a clear peak in the conductance histogram of the Ag-oxygen molecular junctions, but no significant molecular features are seen with Au electrodes. Our work should open a new path to the conductance measurements of single-molecule junctions with oxygen linkers.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.42-45
• /
• 1997

Weldline movement of tailored blanks originates from two sources, primary and secondary. Primary movement occurs by geometrical reason, that is, just scratched lines on the no-weld blanks move during drawing to be fitted to geometrical change. Secondary movement is induced by the characteristics of tailored blanks itself. The primary movement was mainly dependent on the weldline location and not affected by the type of material. The secondary movement caused by laser welding and/or small strength difference in this study was not dominant compared with primary movement. The formability of tailored blanks always inferior to those of original blanks. This is due to the existence of hardened weld bead. The closer a weldline is to punch corner where drawing is most active, the worse its formability becomes. This is because the weldline prohibits the drawing process. It was confirmed by measuring diagonal length at the blank corner. The mode of fracture was changed form wall break to draw break when the weldling was close to the punch corner.

• Journal of Environmental Science International
• /
• v.4 no.5
• /
• pp.481-488
• /
• 1995

This study was carried out to evaluate the variations of headloss rate and of specific deposit to depths with effective size of media and configuration of filter layer during algae blooming period. 0.51mm size media was disqualified because most of headloss occurred rapidly below 5cm from surface layer however 0.91mm size media acted deep filtration more than 20cm from top, as result 0.91mm sixte media filter had 2~3 times longer filtration time than 0.51mm sixte media filter, but 0.91mm size media have break-through potentiality. multi-layer filter with 1.02mm anthracite and 0.51mm sand had large deposit volume in upper layer that could longer filtration time, moreover smaller media in lower layer that could protect break-through.