• Korea-Australia Rheology Journal
• /
• v.21 no.4
• /
• pp.269-280
• /
• 2009

The drop formation dynamics of a shear thinning, elastic, yield stress ($\tau_o$) fluid (Carbopol 980 (poly(acrylic acid)) dispersions) in silicone oil has been investigated in a flow-focusing microfluidic channel. The rheological character of each solution investigated varied from Netwonian-like through to highly non-Newtonian and was varied by changing the degree of neutralization along the poly (acrylic acid) backbone. We have observed that the drop size of these non-Newtonian fluids (regardless of the degree of neutralisation) showed bimodal behaviour. At first we observed increases in drop size with increasing viscosity ratio (viscosity ratio=viscosity of dispersed phase (DP)/viscosity of continuous phase (CP)) at low flowrates of the continuous phases, and thereafter, decreasing drop sizes as the flow rate of the CP increases past a critical value. Only at the onset of pinching and during the high extensional deformation during pinch-off of a drop are any differences in the non-Newtonian characteristics of these fluids, that is extents of shear thinning, elasticity and yield stress ($\tau_o$), apparent. Changes in these break-off dynamics resulted in the observed differences in the number and size distribution of secondary drops during pinch-off for both fluid classes, Newtonian-like and non-Newtonian fluids. In the case of the Newtonian-like drops, a secondary drop was generated by the onset of necking and breakup at both ends of the filament, akin to end-pinching behavior. This pinch-off behavior was observed to be unaffected by changes in viscosity ratio, over the range explored. Meanwhile, in the case of the non-Newtonian solutions, discrete differences in behaviour were observed, believed to be attributable to each of the non-Newtonian properties of shear thinning, elasticity and yield stress. The presence of a yield stress ($\tau_o$), when coupled with slow flow rates or low viscosities of the CP, reduced the drop size compared to the Newtonian-like Carbopol dispersions of much lower viscosity. The presence of shear thinning resulted in a rapid necking event post onset, a decrease in primary droplet size and, in some cases, an increase in the rate of drop production. The presence of elasticity during the extensional flow imposed by the necking event allowed for the extended maintenance of the filament, as observed previously for dilute solutions of linear polymers during drop break-up.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.4
• /
• pp.148-155
• /
• 1998

It is commonly known that, in GMAW, the characteristics of metal transfer and the size of molten drop are highly dependent on the welding current. These changes in the characteristics of metal transfer has a considerable effect on the weld quality, and a lot of studies have been made on metal transfer modes for that reason. In this study, two cases were investigated; the one in which the metal transfer proceeds with gravitational force, surface tension, and no electromagnetic force, and the other in which the process has electromagnetic term in addition, where the current density in the fluid has been assumed to have Gaussian distribution on any given cross-section and it acts vertically. Using fluid flow analysis, this study has observed the whole process of the development and break-up of the molten drop, and it also showed that transitional processes, drop rate, and the drop size in each metal transfer mode can be estimated.

• The KSFM Journal of Fluid Machinery
• /
• v.8 no.5 s.32
• /
• pp.7-12
• /
• 2005

Experimental study was conducted to increase the oxygen transfer efficiency of air diffusers in clean water. By measuring the bubble size from the bubbly two-phase flow visualization with several air diffusers, the size of air bubbles near the top surface of aeration tank seems to be independent on the diffuser types. Considering design parameters for the better break-up of larger bubbles around the air diffusers, advanced conceptual air diffusers using nozzle-type throat showing the higher oxygen transfer efficiencies were made.

• Journal of ILASS-Korea
• /
• v.3 no.3
• /
• pp.42-48
• /
• 1998

This study describes the spray structure of gasoline port injectors by using phase Doppler particle analyzer(PDPA) and particle motion analysis system(PMAS). The characteristics of fuel spray such as the spray penetration, spray angle and breakup processes were obtained by PMAS and the droplet size and mean velocity were measured by PDPA system. Pintle type and two-hole type injectors were used as gasoline port fuel injectors under various injection pressures. The effect of injection pressure on the droplet mean diameter and axial mean velocity of droplet were investigated under the various injection conditions. In addition the comparison of breakup processes for the two types of injectors was also conducted. It Is shown that pintle type injector has smaller droplet size than that of two-hole type injector.

• Journal of the Korean Society of Safety
• /
• v.32 no.2
• /
• pp.112-116
• /
• 2017

Present study investigated the influence of time step size, turbulent eddy viscosity, and the number of layer on rapid and unsteady propagation of dam break flow. When the time step size had a value such that it resulted in Cr of 0.89, a significant numerical oscillation was observed in the vicinity of the wave front. Higher turbulent viscosity ensured smooth and mild slope of velocity and water stage compared with the flow behavior by no viscosity. The vertical velocity at the lower layer positioned near the bottom showed lower velocity compared with other layers.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.05a
• /
• pp.75-81
• /
• 1998

A new advanced integral reactor of 330 MWt capacity named SMART(System-integrated Modular Advanced ReacTor) is currently under development at KAERI(Korea Atomic Energy Research Institute). One of the major design features of the integral reactor is locating the steam generators(SG) inside reactor vessel and eliminating the possibility of LB LOCA(large Break Loss of Coolant Accident). Orifices are fitted at the low part of steam generator cassette to stabilize and balance coolant flow distribution in the MCP (Main Circulation Pump) pressure header. A sensitivity analysis is conducted to determine the optimum orifice size using computer code 'CFX'.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.104-108
• /
• 2018

Lithium-ion batteries have been used in energy storage systems (ESS), electric vehicles (EVs), etc. due to their high safety, fast charging and long lifecycle. This paper aims to improve the convenience of users by changing the wired battery stack used in the battery pack, wirelessly using RFID, reducing the internal volume of the battery pack, reducing the size of the battery pack. In this paper, we propose a battery management system which can provide the flexibility of battery pack expansion and maintenance by using lithium ion battery, battery management system (BMS) and wireless communication for light weight of 1Kw small battery pack. Also, by flexibly arranging the cell layout inside the battery pack and designing to reduce the size of the outer shape of the battery pack.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.152-153
• /
• 2006

We demonstrate the methodology of engineering the multi-component ceramic nanopowder with precise morphology by nanoblast calcinations decomposition of preliminary engineered nanoreactors. Multiple explosions of just melted $C_3H_6N_6O_6$ embedded into preliminary engineered nanoreactors break apart the agglomerates due to the highly energetic impacts of the blast waves. Also, the solid-solubility of one component into the other is enhanced by the extremely high local temperature generated during each nano-explosion in surrounding area. This methodology was applied for production of agglomeratefree nano-aggregates of $Gd_{20}Ce_{80}O_{1.95}$ with an average size of 42 nm and $LaSrGaMgO_{3-x}$ nanopowder with an average aggregate size of 83 nm.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.6
• /
• pp.499-513
• /
• 2014

Objective: The objective of this study was to examine frame ratio of text information and font size in the circle smartwatch. Background: Recently, electronic manufacturers try to develop the original metaphor of traditional wrist watch (circle) in terms of smartwatch. They endeavor to break the square display in order to improve emotional customer satisfaction. Method: The experiments examined twenty level of text information design, combinations of four frame ratios (1:1, 4:3, 16:9, 21:9) and five font sizes (6pt, 7pt, 8pt, 9pt, 10pt). Nineteen participants volunteered for the experiment. Dependent variables were WPM (Words per Minute), reading preference, design preference and total preference. Furthermore, small circle display was made by using circle display data (1.3inch), which was exhibited in IFA (International Funkausstellung) 2014. Results: As a result, ANOVA (Analysis of Variance) revealed that WPM, and task time preference affect the specific frame ratio and font size. Results of ANOVA for reading preference, design preference, total preference were grouped by post-analysis LSD (Least Significant Difference). Among users, display ratio (16:9, 21:9), and font size (9pt) were preferred. In conclusion, 16:9 display ratio and 9pt are adaptable for text information in 1.3inch circle display. Conclusion: From the study, it is shown that 16:9 display ratio and 9pt size are more adaptable for text information in 1.3inch circle display than others. It is mainly due to the fact that the order of frame ratio and font size may affect the usability of reading long text information in a small circle display. Therefore, when developers design a circle display, the square frame ratio and font size are required to be considered according to circle size. Application: The 16:9 display ratio and 9pt font size may be utilized as a text information frame in the circle display design guideline for smartwatch.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.846-855
• /
• 2002

Several soft white spring and winter wheat cultivars were evaluated by analyzing physicochemical properties such as Single Kernel Characterization System (SKCS), milling properties, Rapid Visco-Analyzer (RVA), mixograph pattern, and sugar-snap cookie-making potentialities. Results of SKCS revealed kernel hardness had a positive correlation coefficient with test weight $(r=0.497^{*})$ and near-infrared reflectance (NIR) hardness $(r=0.495^{*})$. SKCS kernel weight had a significantly high correlation of $r=0.942^{**}$ with SKCS kernel size. The test weight had significantly high correlations with straight-grade flour yield $(r=0.720^{**})$, break flour yield $(r=0.490^{*})$, flour ash content $(r=-0.781^{**})$, and milling score $(r=0.838^{**})$. The average RVA peak viscosity of the soft white winter wheat was higher (195.1 unit) than the soft white winter wheat varieties (135.7 unit). A correlation was found between RVA peak viscosity and swelling volume. Significant correlation coefficients were obtained among cookie properties, milling properties, protein content, and mixograph absorption. The cookie top grain score had a correlation coefficient of $r=0.447^{*}$ with swelling volume.