• KEPCO Journal on Electric Power and Energy
• /
• 제5권4호
• /
• pp.257-262
• /
• 2019

Lattice steel towers for overhead transmission lines have been replaced by tubular steel poles due to the visual impact of large and complex shape of truss type. Demand for tubular steel poles consisting of a single frame member continues to grow because of its advantages such as visual minimization, architectural appeal and minimal site consumptions. However, there are some constraints on the transportation and construction. As the diameter of tower base has been enlarged, it may exceed minimum height limit required to pass the tunnel in case of land transportation. Also, in a narrow place where it is not easy to secure the installation areas such as mountainous places, there might be some areas wherein it must secure a wide working space so that large vehicles and working cranes will be allowed to enter. In this paper, we presented a vertical separated tubular steel pole, which is a new type of support that can be implemented for general purpose such as mountainous areas or narrow areas to improve the issues raised by breaking away from the conventional design and fabrication methods. Technical approaches for overcoming the limit of the cross-sectional size is to separate and modularize the cross-section of the tubular steel pole designed with a size that cannot be carried or assembled, and to lighten it with a weight capable of being transported and assembled in a narrow space or mountainous area. As a result of this research, it will be possible to enter small and medium sized vehicles in locations where it is restricted to transport by large-sized vehicles. In the case of mountainous areas, it will be possible to divide it into a weight capable of being carried by a helicopter and it will be easy to adjust and fabricate it with individual modules. Furthermore, in order to break away from the traditional construction method, we proposed the equipment that can be applied to the assembly of Tubular Steel Pole without using a large crane in locations where there is no accessible road or in locations wherein large cranes cannot enter. In particular, this paper shows the movable assembling equipment and some methods that are specialized for vertical separated tubular steel pole consisting of members with reduced weight. The proposed assembly equipment is a device for assembling the body of the Tubular Steel Poles. It will be installed inside the support and the modules can be lifted by using the support itself.

• 한국지역지리학회지
• /
• 제14권6호
• /
• pp.664-679
• /
• 2008

본 논문의 목적은 대도시인 대구광역시 주변 농촌지역인 고령군을 사례로 지역경제 여건과 지역경제 활성화 관련 계획을 분석하고, 이를 토대로 지역경제 활성화를 위한 정책 과제를 제시하는 것이다. 고령군은 대도시 접경지역이며, 광역 교통망에 효과적으로 연계되어 있는 위치적 이점을 가지고 있으나, 제조업과 서비스업보다는 농업의 비중이 여전히 높은 산업구조 특성을 나타내는 지역이다. 하지만, 고령군 지역경제 계획을 검토한 결과, 고령군의 지역경제발전계획은 지역의 여건을 고려하여 지역 특화 산업을 선별하고, 이를 포괄적인 관점에서 접근하기 보다는 보편적인 지역발전 계획에 그치고 있는 것으로 나타났다. 따라서 고령군의 지역경제 활성화 계획은 백화점식 사업 계획을 지양하고, 지역 특수성과 산업 역량 및 잠재성을 고려하여 사업 대상에 대한 선택과 집중을 통해 중장기적 관점에서 전략적이고, 체계적으로 추진할 필요가 있다. 고령군은 첨단 제조업이나 고차서비스산업의 육성이라는 환상을 깨고 경쟁력 기반을 갖춘 산업 부문 및 품목을 전략적으로 설정하여 가치사슬 측면에서 핵심 산업과 연관 산업을 연결하는 부문을 통합적으로 육성해야 할 것이다. 이러한 맥락에서, 본 연구는 고령군 지역경제 활성화 정책 대안으로서 농업과 서비스산업이 연관된 산업 융합형 친환경 특화농업 클러스터와 조립금속 및 운송장비 제조업에 특화된 산업특성화 전문산업단지 조성을 제안하였다.

• 유통과학연구
• /
• 제14권5호
• /
• pp.91-96
• /
• 2016

Purpose - Although various studies have been conducted on the stress of service employees, there are still lack of studies regarding job stress and job satisfaction of call center workers. Especially there are quite few studies on the job stress according to employment type. This study focused on job stress and job satisfaction for call center employees and the correlation between the two factors and aimed to provide basic materials for seeking for the plans to reduce job stress and improve job satisfaction. Research design, data, and methodology - Frequency, percentage, and mean value were calculated through descriptive statistics in order to find out demographic characteristics, level of job stress, and job satisfaction. Differences in job stress according to employment type were calculated by using one-way ANOVA. Correlation between job stress and job satisfaction were identified through empirical analysis with Pearson's correlation coefficient. 150 materials were used for final analysis. The collected materials were analyzed to get statistics by using SPSS 20. Results - First, as for the job stress of call center workers, overall mean value was 2.54 in 4-point scales. Among the six sub-factors, job demands had the highest score, which was 2.67. Second, as for the job stress according to employment type, others showed higher score than mean value followed by contract job and full-time job in that order, in terms of job insecurity and organizational system. In terms of inappropriate remuneration, contract job showed higher score than mean value followed by others and full-time job. Third, as for the satisfaction with job, the mean value was 2.37 in 4-point scale and "very much satisfied" was only 3.3%. Lastly, in terms of job stress and job satisfaction, all sub-factors except for job demands showed significant correlation. The more job stress increased, the more job satisfaction decreased. Conclusions - First, as a result of analyzing job stress according to the employment type of call center workers, job stress increased more when the employment type was not full-time. Therefore, it was assumed that self-rescue efforts should be followed for effective employment management of call center business where contract employment takes most part as well as efforts to transfer them to full-time job. Second, decrease in job satisfaction of call center workers may affect the performance of an organization as well as service quality of the company providing the service. Therefore, various supports are required to decrease job stress and increase job satisfaction for call center workers through the expansion of rest area or break time. Third, I could recognize that there were lack of academic research on call center business in the whole service industry. Therefore, further research should be conducted more actively in the future. In particular, this study has special significance in the aspect that there were few studies on the job stress of call center workers according to employment type.

• Wind and Structures
• /
• 제11권4호
• /
• pp.275-289
• /
• 2008

Large eddy simulations have been performed within and over different types of urban building arrays. This paper adopted three dimensionless parameters, building frontal area density (${\lambda}_f$) the variation degree of building height (${\sigma}_h$), and the staggered degree of building range ($r_s$), to study the systematic influence of building spacing, height and layout on wind and turbulent characteristics. The following results have been achieved: (1) As ${\lambda}_f$ decrease from 0.25 to 0.18, the mean flow patterns transfer from "skimming" flow to "wake interference" flow, and as ${\lambda}_f$ decrease from 0.06 to 0.04, the mean flow patterns transfer from "wake interference" flow to "isolated roughness" flow. With increasing ${\lambda}_f$, wind velocity within arrays increases, and the vortexes in front of low buildings would break, even disappear, whereas the vortexes in front of tall buildings would strengthen and expand. Tall buildings have greater disturbance on wind than low buildings do. (2) All the wind velocity profiles and the upstream profile converge at the height of 2.5H approximately. The decay of wind velocity within the building canopy was in positive correlation with ${\lambda}_f$ and $r_s$. If the height of building arrays is variable, Macdonald's wind velocity model should be modified through introducing ${\sigma}_h$, because wind velocity decreases at the upper layers of the canopy and increases at the lower layers of the canopy. (3) The maximum of turbulence kinetic energy (TKE) always locates at 1.2 times as high as the buildings. TKE within the canopy decreases with increasing ${\lambda}_f$ and $r_s$ but the maximum of TKE are very close though ${\sigma}_h$ varies. (4) Wind velocity profile follows the logarithmic law approximately above the building canopy. The Zero-plane displacement $z_d$ heighten with increasing ${\lambda}_f$, whereas the maximum of and Roughness length $z_0$ occurs when ${\lambda}_f$ is about 0.14. $z_d$ and $z_0$ heighten linearly with ${\sigma}_h$ and $r_s$, If ${\sigma}_h$ is large enough, $z_d$ may become higher than the average height of buildings.

• 한국환경과학회지
• /
• 제19권11호
• /
• pp.1407-1421
• /
• 2010

This study was carried out to elucidate the relation between water quality and structure of the aquatic ecosystem in the agriculture reservoir Otae-ji from January to December in 2009. The proportion of forest was 46.98%, which means that non-point sources are major contributor of water pollution in this area. The annual mean COD(Chemical Oxygen Demand) in Otae-ji was $3.6mgL^{-1}$, indicating, level II of environmental standards and the trophic state was mesotrophic. Although total phosporus concentration in the reservoir was high in August due to large inflow of nutrients from outside the reservoir during monsoon season, there was no break out of significant algal bloom in the summer. The seasonal succession of phytoplankton showed that the dinophyta dominated in the the spring, chlorophyta in the summer, chrysophyta and chlorophyta in the autumn and chrysophyta in the winter. In case of zooplankton, rotifers dominated in the most seasons, but cladoceran(Bosmina longirostris) dominated in June and copepod(Nauplii) in August. The macrophyte plants showed diverse species compositon consisted of 3 varieties, 24 species, 23 genera, 15 families and 14 orders. The macroinvertebrates also showed various FFG(Functional Feeding Groups) such as GC(Gathering-Collector), P(Predator), SH(Shedder), FC(Filter-Collector) and PP(Plant-Piercer). Ecosystem stability analysis using aquatic insects was classified as Group I, which has high resilience and resistance indices. A total of 14 species of fish was collected but exotic species such as Lepomis macrochirus and Micropterus salmoides were not found in Otae-ji. In conclusion, the preservation of healthy food wed in the reservoir ecosystem is closely related to water quality management as well as effective prevention of algal bloom by helping good material circulation in aquatic ecosystems.

• Physical Therapy Rehabilitation Science
• /
• 제5권3호
• /
• pp.138-142
• /
• 2016

Objective: The purpose of this study was to investigate how light touch with a finger affects balance ability when a posture is maintained in the condition of visual information blockage and to provide a fundamental material for developing balance ability in the process of rehabilitation treatment. Design: Cross-sectional study. Methods: The study subjects were 17 healthy men and women in their twenties and thirties who were studying at S University in Seoul. The system was comprised of an equilateral triangular force platform. Subjects were asked to step on the foot position of the force platform (Good Balance, Finland) barefooted for 30 seconds, with eyes closed, hands hanging down loosely, and feet comfortably apart. It was connected to a laptop by using Bluetooth technology. An experiment was conducted in the following three circumstances: 1) no-touch trial, 2) light touch to the back (T7 area), and 3) light touch to the middle finger of the left hand. Each subject was given a 10-minute break between consecutive measurements. The experimental circumstances were performed randomly. Anteroposterior sway (APSV), mediolateral sway velocity (MLSV), and velocity moment (VM) were measured. Results: The APSVs (mm/s) were $9.32{\pm}3.37$ and $5.45{\pm}2.98$; the MLSVs (mm/s), $6.39{\pm}3.35$ and $3.31{\pm}2.48$; and VM ($mm^2/s$), $17.13{\pm}11.75$ and $6.76{\pm}8.31$ in the first and second experimental circumstances, respectively. APSV, MLSV, and VM values were significantly improved with the 1) no-touch trial and 2) light touch to the back trail conditions compared with the 3) light touch to the middle finger of the left hand condition (p<0.05). Conclusions: This study revealed that the balance ability for maintaining a body posture was influenced more by light touch to the back (T7) than by light touch with the sensitive fingertip and body sway diminished after visual information was blocked.

• 공업화학
• /
• 제31권4호
• /
• pp.416-422
• /
• 2020

본 연구에서는 생분해성 고분자인 poly(latic acid) (PLA), poly(butylene adipate-co-terephthalate) (PBAT)와 첨가제로 hydrogenated castor oil (HCO) powder를 이용하여 친환경 생분해성 소재를 제조하였다. 제조한 PLA/PBAT/HCO 블렌드 필름의 특성은 scanning electron microscope (SEM)와 fourier-transform infrared spectroscopy (FT-IR)를 이용하여 분석하였다. SEM 분석 결과 HCO가 첨가된 PLA/PBAT (8 : 2) 블렌드 필름은 12-hydroxy stearic acid (12HSA)와 cellulose가 첨가된 필름과 비교했을 때, 안정적인 표면을 나타내었다. FT-IR 결과는 PLA/PBAT 블렌드 필름에서 HCO의 특성 피크의 나타냈으며, HCO 함량이 0에서 0.2 wt%까지 증가함에 따라 intensity가 증가함을 알 수 있었다. 또한, 제조한 PLA/PBAT/HCO 블렌드 필름의 물리적 특성, 열 분석을 수행하였다. 그 결과 HCO 첨가에 의해 물리적 특성과 열 안정성이 3배 이상 향상되었음을 확인하였다. 제조한 생분해성 소재의 토양에서 생분해 정도는 90 days 동안 6~20% 분해됨을 확인하였다.

• 한국학교ㆍ지역보건교육학회지
• /
• 제1권2호
• /
• pp.105-125
• /
• 2000

The purpose of this study was to examine the influence of school safety accident on teacher's normal educational activities and to seek some desirable ways to cope with it. The subjects in this study were 351 class teachers randomly selected from Seoul and Kyonggi Province and surveyed from April through July, 2000. The conclusions were as follows; 1. Actual Condition of School Safety Accident 1) Approximately many teachers investigated had had an experience to suffer safety accident. Safety accident occurred most during break or class, but there was a significant difference according to service area. 2) Safety accident took place most in playground, and the most common cause was student's own carelessness, and the most widely occurred accident type was an injury. But there was no significant difference caused by the general characteristics of the teachers. 2. Influence of Safety Accident On Teacher's Educational Activities. 1) The largest reason they offered safety education was to ensure student safety. The greatest number of them had an opinion they would consider changing or giving up a planned normal educational activity if they recognized any possibilities of safety accident. There was a significant difference in this point according to gender and career. 2) They worried about possible safety accident most during field study, but there was a significant difference according to gender or presence or absence of safety accident experience. 3) The general characteristics of teacher produced a significant difference to an experience of avoiding educational activity due to psychological withdrawal, but safety accident experience didn't make any difference. 3. Minimization of Teacher Damage or Loss from Safety Accident. 1) The dominant opinion about teacher's small mistake for any occurrence of safety accident was that the responsibility should be escaped to maintain teacher's authority. For severe mistake, however, there were two different opinions at the same percentage: one was being exempted and the other was taking civil liability. 2) Establishing teacher insurance was preferred as a way to minimize teacher's economic loss from safety accident, but there was a significant difference according to gender. 3) The dominant opinion about the payment of insurance premium for safety accident was that it should be paid from school operating expenses.

• 과학기술학연구
• /
• 제18권2호
• /
• pp.95-133
• /
• 2018

2천 년대가 시작된 이후 전 세계적으로 메이커 운동이 활발하게 이루어지고 있다. 오늘날에는 서울을 비롯해서 지구촌의 주요 도시들에서 해마다 메이커 페어가 열릴 정도이고 참석자들이 날로 늘어나고 있어서 일종의 메이커 '현상'으로까지 볼 수 있을 정도이다. 메이커 운동이 가지는 적극적 함의는 그동안 소비자로만 머물게 했던 제조의 독점을 무너뜨리고 시민들의 메이커로서의 권리와 능력을 되찾게 하려는 운동이라고 할 수 있다. 오늘날 고도로 발전한 산업자본주의는 구조적으로 시민들을 불능으로 만들고, 손발을 묶어놓고 오로지 소비만 하는 존재로 퇴화시키려는 일련의 경향성을 가지고 있다고 볼 수 있다. 따라서 메이커 운동은 탄생에서 현재까지의 궤적으로 통해 볼 때 현재의 신자유주의적 제조문화와 구조적 긴장 관계에 놓여있다고 할 수 있다. 이 연구는 메이커 운동을 "비판적 만들기(critical making)"의 관점에서 적극적으로 해석하려는 시도이다. 메이커 운동은 1960년대와 1970년대 미국에서 나타났던 "대항문화"와 "신공동체주의"에까지 그 근원을 추적할 수 있다. 다른 한편으로 메이커 운동이 또다른 기술유토피아주의에 빠질 수 있으며, 소비사회의 한 영역으로 기능하면서 오히려 소비주의를 활성화시키는 방향으로 동원될 수 있다는 비판도 있다. 메이커 운동은 그 특징상 무정형적이며 현재 진행중인 상태이기 때문에 아직 섣부른 규정을 내리기 힘든 상태이지만, 그동안 과학기술의 소비자로만 규정되던 시민들이 메이커라는 생산자로 나서면서 과학기술과 시민사회의 지형에 큰 변화를 일으킬 수 있는 가능성을 보여주고 있다는 점에서 그 시민과학적 함의가 크다고 할 수 있다.

• 한국대기환경학회지
• /
• 제7권1호
• /
• pp.55-65
• /
• 1991

The study was performed to select a adaptable tree species under stressed field conditions where there are a industrial plants operating with a number of smoke stacks emitting pollutants, such as hydrogen fluoride and sulfur dioxide. As a result of the study, a tree species selected are due to construct a forest belt in a zones near industrial plants to reduce the concentrations of air pollutants. The concentrations of atmospheric hydrogen fluoride and sulfur dioxide were very higher at experimental sites near industrial plants (air-pollution sites) than at control site. The leaves of 7 tree species grown at air pollution sites contained more sulfur and, specially, fluorine than at those control site. Among the tested tree species, Ligustrum japonicum Thunb. and Euonymus japonica Thunb. grown at air pollution sites did not at all break out a foliar injury but appeared to be healthy, as well as those grown at control site. Acer pseudo-sieboldianum Kom., Pinus virginiana Mill., Larix leptolepis Gordon., Pinus koraiensis Sieb. et Zucc., Pinus strobus L., Picea abies Karst and Ligustrum obtusifolium Sieb. et Zucc., however, showed a severe fluoride-type foliar injury such as necrosis on tip or margin of leaves, etc. Fluorine found in leaves was proved to be correlated to sulfur found in leaves whereas index of foliar injury hadn't a good correlation to pollutants found in leaves. It appears that Euonymus japonica Thunb., Ligustrum japonica Thunb., Platanus acerifolia Willd, Chamaecyparis pisifera Endl., Populus tomentiglandulosa T. Lee and Sophora japonica L. grown at both experimental sites had a high value of percent survival whereas Pinus virginiana Mill., Pinus koraiensis Sib. et Zucc., Koelreuteria paniculata Laxm. and Alnus hirsuta Rupr. had an extremely low value of that. In comparison with control site, the percent tree height increments in Chamaecyparis pisifera Endl., Ligustrum japonicum Thunb., Quercus acutissima Carruth., Populus tomentiglandulosa T. Lee, Pinus thunbergii Parl and Euonymus japonica Thunb. and the percent upmost root diameters in Populus tomentiglandulosa T. Lee, Chamaecyparis pisifera Endl., Euonymus japonica Thunb., Ligustrum japonicum Thunb., Betula platyphylla var. japonica Hara and Pinus thunbergii Parl. cultivated at air polluted sites showed very high value above 90%, respectively. A significant negative correlation (r=-0.662) was recognized between the index of foliage injury and the percent collective character, which was the mean of tree characters such as percent survival, percent tree height increment and percent upmost root diameter increment which compared to those at air polluted site with those at control site. Based on the percent collective character Ligustrum japonicum Thunb., Euonymus japonica Thunb., Chamaecyparis pisifera Endl., Populus tomentiglandlosa T. Lee, Betula platyphyla var. japonica Hara and Platanus occidentalis L. have large value about 90%, respectively. Therefore, the results indicate that this tree species are adaptable species in air polluted regions. For better understanding of the adaptable tree species, furthur studies concerning the effects of various air pollutants on the tree growth are required.