• 한국응급구조학회지
• /
• 제7권1호
• /
• pp.65-80
• /
• 2003

Various disasters have been continuously occurred in Korea from 1990s to now. However, there is no substantial improvement against damages as compared with the past due to various reasons such as lack of fundamental recognition, ineffective response systems and widespread insensitivity to safety. More worse, new types of disasters have been frequently generated due to rapid changes in social structures and industrial development, unusual changes in weather and changes of international situations. These disasters request comprehensive countermeasures. In particular, while material damages by disasters can be recovered, the losses of precious lives cannot be recuperated in any ways. Thus, it is critical to set effective disaster medical plans. The first way to minimize damages by disasters is the prevention and the next is to set the disaster medical plans focusing on preliminarily activating the emergency medical system to rapidly rescue and take appropriate emergency medical services for casualties in the early stage when any disaster occurs. Nevertheless, no sufficient researches or references do not exist up to now. Even worse, effective emergency medical systems that play critical roles in increasing survival rates of casualties in actual disaster areas is not deployed. For the United States, the consistent countermeasure system is established in FEMA through a close cooperative system with relevant organizations for serious accidents including terrorists' attacks or natural disasters. For the emergency medical services in disasters, the disaster medical plan is set to cope with any disasters in perfect order by special area as operating the National Disaster Medical SystemESF#8 Role by FEMA. Accordingly, we need to set the extensive and integrated disaster prevention system for rapid and flexible operation against various kinds of serious accidents. This study identified overall problems in disaster control plans in Korea and suggested how to improve the emergency medical service system in disaster areas. Furthermore, it aims to prepare the basic data to set the effective emergency medical service plans when substantial casualties break out and more reasonable and systematic disaster control plans to cope with the future occurrence of serious disasters.

• 한국전기전자재료학회논문지
• /
• 제26권4호
• /
• pp.271-274
• /
• 2013

Power Metal Oxide Semiconductor Field Effect Transistor's (MOSFETs) are well known for superior switching speed, and they require very little gate drive power because of the insulated gate. In these respects, power MOSFETs approach the characteristics of an "ideal switch". The main drawback is on-resistance RDS(on) and its strong positive temperature coefficient. While this process has been driven by market place competition with operating parameters determined by products, manufacturing technology innovations that have not necessarily followed such a consistent path have enabled it. This treatise briefly examines metal oxide semiconductor (MOS) device characteristics and elucidates important future issues which semiconductor technologists face as they attempt to continue the rate of progress to the identified terminus of the technology shrink path in about 2020. We could find at the electrical property as variation p base dose. Ultimately, its ON state voltage drop was enhanced also shrink chip size. To obtain an optimized parameter and design, we have simulated over 500 V Field ring using 8 Field rings. Field ring width was $3{\mu}m$ and P base dose was $1e15cm^2$. Also the numerical multiple $2.52cm^2$ was obtained which indicates the doping limit of the original device. We have simulated diffusion condition was split from $1,150^{\circ}C$ to $1,200^{\circ}C$. And then $1,150^{\circ}C$ diffusion time was best condition for break down voltage.

• 한국농촌건축학회논문집
• /
• 제2권1호
• /
• pp.13-24
• /
• 2000

This study aims at revealing important utilization planning by surveying and analyzing unused classrooms in primary school's facilities. That is various and positive utilization planning of unused classrooms in order to cope with the changes of educational environment focused on high and multi-functionization, rather qualitative aspect than quantitative. By field-survey and interview, physical and environmental factors such as, the change procedure of students, unused facilities in schools and improvement affairs and purpose stressed by schools were surveyed. Additionally, the way of educational facilities to future society linked with residents was examined by surveying about the relationship between educational facilities and regional communities. The curriculums and "School facilities standard ordinance" have been revised in part by several times individually and couldn't meet with educational facilities, educational and social change positively. In rural area, to apply the standard of the capacity by a class with 40 students like city is not desirable. To make educational environment better qualitatively, the capacity should be reduced by 30 students and the unit square per a student enlarged by $2.4m^2$. By room unit module "school institution and managerial regulations under high school" should be applied distinctively to break down like 6, 7~12, 13~24 and over 25 classes. So re-institution of the capacity by a class and the standard unit of the number of class by scale is needed.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2000년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.13-18
• /
• 2000

Welding is critical technique for the joining of materials in the nation's major Manufacturing industries. Since 1998, leaders in welding industry have defined a vision of the issues and opportunities that it will face in 2020. In developing this vision document, more than 25 senior managers and respected experts from various segments of the welding community met to begin a dialog about the future of the welding industry. They were brought together to develop a long-range business plan for their industry that would identify how it would meet the needs of manufacturers, of the marketplace, and of society in 2020. In essence, these decision makers created an ideal vision of the state of their industry in 20 years, and the strategy to reach it. Welding is a precise, reliable, and cost-effective, method for joining materials. No other technique is as widely used by manufacturers to join metals and alloys efficiently. Most of the familiar objects in modern society, form buildings and bridges, to vehicles, computers, and medical devices, could not be produced without the use of welding. Despite the importance of welding to the manufacturing industry, the leaders in this area felt that welding was not appreciated as much as it should be from the society. The welding industry consists of the “users” of welding techniques as well as the companies, universities and other organizations that industry look for improvements in their operations by 2020, and should find their interest addressed in this document. A major economic impact study co sponsored by AWS and EWI and supported by US Navy, State of Ohio, US Department of Commerce, and major companies was kicked off. This two-year study will determine the economic impact of welding on the United States economy. The objective of this study is to break a paradigm about welding-those of us who are heavily involved in welding, believe strongly that much of our gross domestic product is directly dependent on welding. Furthermore, continued advances in the field of welding are necessary to achieving further increases in productivity that makes our economy strong. Yet, despite intuition, anecdotal information, and fragmented analyses, the completing quantitative information that would proved the justification for strategic actions to further develop this critical field is not currently available.

• 상하수도학회지
• /
• 제23권3호
• /
• pp.345-352
• /
• 2009

The purpose of inlet baffle is to distribute the flow uniformly over the entire cross-sectional area of the sedimentation basin. The goal when designing this baffle is to achieve some head loss while keeping the velocity gradients through the ports equal to the velocity gradient in the end of the flocculator, so as to not break up the flocs. Sedimentation tank performance is strongly influenced by hydrodynamic and physical effects such as inlet design. This study was conducted to evaluate the effect of open ratio of the inlet baffle on hydraulic behavior within a rectangular sedimentation basin using CFD simulation and ADV technique. In order to verify the CFD simulation, we measured the factual velocity at 18 points in the full-scale sedimentation basin at Y water treatment plant. Good agreement was obtained between the CFD predictions and the experimentally measured data. From the simulation results of the existing basin with 7.4 % open ratio, it was investigated that extreme decrease in velocity occurred in the middle of basin. Since then, flow features was unstable. The region which the velocity decrease rapidly moved forward to the flow direction in proportion to the increase of inflow velocity. Also, it was investigated that the flow characteristic of 6.0 % open ratio was significantly different from 7.4 % open ratio at the same configuration condition. These results are a clear indication that inflow momentum and open ratio are the parameters affecting the characteristics of hydraulic patterns. The influence of these parameters on the sedimentation performance requires further study.

• 대한소아치과학회지
• /
• 제25권4호
• /
• pp.671-682
• /
• 1998

Electrophysiological phenomena of pyramidal cells in the CA1 area of the dorsal hippocampus were recorded from and filled with neurobiotin in anesthetized rats. The electropharmacological properties of membrane as well as the cellular-synaptic generation of rhythmic slow activity (theta) were examined. The intracellular response characteristics of these pyramidal cells were distinctly different from responses of interneurons. Pyramidal cells had a high resting membrane potential, a low input resistance, and a large amplitude action potential. A afterhyperpolarization was followed a single action potential. Most of pyramidal cells did not display a spontaneous firing. Pyramidal cells displayed weak inward rectification and anodal break excitation. The slope of the frequency-current relation was 53.4 Hz/nA for the first interspike interval and 15.9 Hz/nA for the last intervals, suggesting the presence of spike frequency adaptation. Neurobiotin-filled neurons showed pyramidal morphology. Cells were generally bipolar dendritc processes ramifying in stratum lacunosum-moleculare, radiatum, and oriens. Commissural stimulation discharged pyramidal cells, followed by excitatory and inhibitory postsynaptic potentials (EPSPs and IPSPs). The frequency of theta-related membrane potential oscillation was voltage-independent in pyramidal neurons. At strong depolarization levels (less than 30 mV) pyramidal cells emitted sodium spike oscillation, phase-locked to theta. The observations provide direct evidence that theta-related rhythmic hyperpolarization of principal cells is brought by the rhythmically discharging interneurons. Furthermore, the findings in which interneurons were also paced by rhythmic inhibitory postsynaptic potentials during theta suggest that they were periodically hyperpolarized by their GABAergic septal afferents.

• 한국조경학회지
• /
• 제31권5호
• /
• pp.58-72
• /
• 2003

Rooftop greenery has been used as a way to solve urban environmental problems by creating green space in densely populated cities. This study was carried out to suggest more effective designs for roof-garden at hospitals through a post-occupancy evaluation. The roofgarden of Asan Medical Center was evaluated with regards to setting, proximate environmental context, users, and design activity by a multi-method including plan investigations, observations, in-depth interviews and questionnaires. The results are summarized as follows; the users' main activities included resting, walking, and talking. A number of users were observed at shaded spaces sitting on such things as benches, pergolas, and shelters. The satisfaction of the users showed high satisfaction level except in the amount of shade, facilities, and shelter. The variables affecting a overall satisfaction were ‘accessibility’, ‘safety’, ‘quality of surroundings’, and ‘suitability for speculation’. By comparing the design concept with using pattern, designer's intention was not reflected sufficiently in several aspects such as ‘event deck for therapy programs’, ‘grove and path’, and ‘low planters’. This study suggests some design implications; it is necessary to furnish shaded sitting places for passive behaviors and pathways for walking or a light exercise. A wind-break wall with glass windows could widen the users' views in a limited space. Natural shade like tree shade or pergola are more desirable than artificial shades. As for the vertical location of the roofgarden, the middle floor could be better than top area for accessibility. Characteristics of building and users should be considered in detail to provide distinct spaces. Proper technical standards for the greening of artificial ground should be established.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.84-87
• /
• 2010

본 논문에서는 power management IC에 사용되는 아날로그 트리밍용 antifuse OTP 셀을 제작하였다. VPP (=7V)와 VNN (=-5V)의 Dual program voltage를 이용하는 antifuse OTP 셀은 antifuse 양단에 hard breakdown 이상의 전압을 인가하여 thin gate oxide를 breakdown시킨다. $0.18{\mu}m$ BCD 공정을 이용하여 제작된 antifuse OTP 셀의 면적은 $48.01{\mu}m^2$으로 eFuse OTP 셀 면적의 44.6% 수준이다. 20개의 테스트 패턴을 측정한 결과 프로그램 후 antifuse의 저항은 수 $k{\Omega}$ 이하로 양호하게 측정되었다.

• Journal of Ecology and Environment
• /
• 제35권3호
• /
• pp.177-188
• /
• 2012

We analyzed crown development in Aucuba japonica Thunb. var. japonica resulting from the responses of phytoelements to habitat light conditions over a long period of time. Over the years, the degree of extension unit (EU) dimorphism and the degree of anisophylly were higher under shaded conditions than in brighter conditions. An overall temporally increasing pattern in the degree of EU dimorphism was found while no clear-cut trend was found in the case of anisophylly. EU length and number of leaves per EU co-varied in a spatio-temporal context. The number of terminal buds and their sizes acted as the key initiators of morphological differences of phytoelements which were further amplified following bud break. Leaf area density was displayed mostly in the apex peripheral layer of the crown and the apex layer received most of the incident light. There was a tradeoff between annual leaf production and mean leaf size. Depending on the heterogeneity of irradiance level within a crown, correlative growth inhibition caused higher EU mortality at brighter sites. Due to high mortality, shorter EUs had a mere role in the construction of structural framework of the crown except for the formation of some gaps. There was a strong convergence of EU dimorphism, anisophylly, EU extension growth and variations in leaf size towards formation of functional crown to reduce potential self-shading. Depending on the irradiance level, Aucuba japonica Thunb. var. japonica showed two different modes of crown expansion. At the brighter sites, individual crown expansion was progressive while at the darker sites, individual crown expanded in a diminishing manner and maintained a stable size. A plant's "growth diminishing phase" appeared earlier at shaded sites than brighter sites.

• 비파괴검사학회지
• /
• 제33권5호
• /
• pp.415-421
• /
• 2013

CGI는 주철보다 큰 강도 또는 작은 무게가 요구되는 응용에서 인기를 얻고 있다. 최근, 강화흑연강은 디젤 엔진 블록, 터보 하우징 및 배기 매니폴드에 사용된다. 이 논문은 873~1173 K에서 1~24 시간 동안 열화된 CGI340의 기계적 성질의 변화에 따른 음향방출 특성을 평가하였다. 연필심 파괴시험 결과에서, 탁월주파수 및 모재의 속도는 각각 97 kHz와 5,490 m/s이었다. 인장시험에서 모재는 상대적으로 높은 탁월주파수를 얻었다. 그러나 열처리된 재료, 열처리 시간이 길고, 열처리 온도가 높을수록, 낮은 주파수의 영역에서 얻어졌다. 이러한 현상은 장기간의 사용에 의해 나타난다.