• Transactions on Electrical and Electronic Materials
• /
• v.13 no.5
• /
• pp.252-255
• /
• 2012

In order to characterize insulation properties of epoxy/micro-silica/nano-silicate composite (EMNC), long-term and short-term AC treeing tests were carried out undr non-uniform electric field generated between needle-plate electrodes. In a long-term test, a 10 kV (60 Hz) electrical field was applied to the specimen positioned between the electrodes with a distance of 2.7 mm in an insulating oil bath at $30^{\circ}C$, and a typical branch type electrical tree was observed in the neat epoxy resin and breakdown took place at 1,042 min after applying the 10 kVelectrical field. Meanwhile, the spherical tree with the tree length of $237{\mu}m$ was seen in EMNC-65-0.3 at 52,380 min (36.4 day) and then the test was stopped because the tree propagation rate was too low. In the short-term test, an electrial field was applied to a 3.5 mm-thick specimen at an increasing voltage rate of 0.5 kV/s until breakdown in insulating oil bath at $30^{\circ}C$ and $130^{\circ}C$, and the data was estimated by Weibull statistical analysis. The electrical insulation breakdown strength for neat epoxy resin was 1,763 kV/mm at $30^{\circ}C$, while that for EMNC-65-0.3 was 2,604 kV/mm, which was a modified value of 47%. As was expected, the breakdown strength decreased at higher test temperatures.

• Journal of Korean Society of Forest Science
• /
• v.24 no.1
• /
• pp.53-61
• /
• 1974

Pine forests existing in Hong-do island were examined as regarding such characteristics, tree form, needle length, branch diameter, bark colors, ratio of summer wood to springwood, location and number of resin canal and other measurements. Hong-do island, located the furthest west part of Korea, suports only Pinus densiflora but very few Pinus thunbergii, in fact the present authors could not find any black pine individuals at all through investigation. Checking 14 individual trees of red pine, more than age of 20, of the genetic contamination by black pine, in a certain degree, exist. Here, a very dense foliage type and a very sparse foliage type tree of red pine growing nearby was examined and the unique fact was that each of those type has only one (average number 1.3) accessory resin canal, while other trees have three as minimum or more. The present authors thought this island had not been covered by any Pinus thunbergii but by Pinus densiflora. It was thought that Pinus thunbergii stands grown along the sea-coast of Korean Peninsula are pollen donors to this island.

• Journal of Chest Surgery
• /
• v.15 no.1
• /
• pp.27-34
• /
• 1982

Pulmonary sequestration Is an unusual congenital malformation characterized by the presence of nonfunctioning lung tissue which usually has no communication with the normal bronchial tree and which receives its blood supply from an anomalous systemic artery instead of a pulmonary arterial branch. Two forms of pulmonary sequestration occur: Intralobar sequestration, in which the abnormal pulmonary tissue is incorporated within the normal lung and shares a common covering of visceral pleura, and extralobar sequestration, in which the abnormal pulmonary tissue is separated from the normal lung and has its own pleural investment. Since 1970, five cases of pulmonary sequestration were operated at the Department of Thoracic and Cardiovascular Surgery, College of Medicine, Seoul National University. 1. Among five cues, one was male and the others were female. 2. All were intralobar type and involved left lower lobe. 3. There was no operative mortality following left lower lobectomy and ligation of the aberrant artery.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2345-2348
• /
• 1999

Existing $\psi$-AEA-t (phase-AEA-time) characteristic in polymer materials for power cable is good in general deterioration characteristic according to time variation, but it is difficult to clearly distinguish from deterioration state and diagnosis of deterioration is not enough to some extent. This paper is interpreted AE discharge statistics quantities measuring phase-amplitude variation of acoustic emission characteristic obtained from treeing breakdown experiment. Besides it can know useful discharge statistics quantities (AE average inception phase/amplitude, AE average maximum phase/amplitude) about so many for diagnosis of treeing deterioration.

• Journal of Korean Society of Forest Science
• /
• v.109 no.3
• /
• pp.325-332
• /
• 2020

This study was conducted on cultivation farms in the Gimcheon area, which is the main production area of walnuts, in order to compare and analyze the yield and fruit quality of walnut trees (Juglans sinensis Dode) derived from seedlings. The official trees were classified into nine classes from 10 to 60 years old, and a total of 135 trees were selected, with 15 trees selected for each grade. The growth and fruit characteristics for each age group were then examined. The average tree height was 10.3 m, and the average crown area was 63.7 ㎡. The average number of fruit settings per tree was 573.1, with the largest number of walnuts per tree at 35 years (974.0 walnuts), and the lowest walnuts per tree at 10 years (124.7 walnuts). In addition, the number of fruit settings per bearing mother branch in 35 year old trees was the highest at 3.1. The average weight for each fruit type was found to be 58.7 ± 4.0 g of walnuts in green peel, 10.5 ± 0.5 g of dried shell walnuts, and 4.9 ± 0.2 g of walnuts, respectively. The average yield by fruit type was 32.5 ± 13.8 kg of walnuts in green peel, 5.9 ± 2.5 kg of dried shell walnut, and 2.8 ± 1.2 kg of walnuts. The yield was positively correlated with the crown area, the number of fruits setting per bearing mother branch, and the number of fruits setting per 1 ㎥. The formula used to estimate the yield per tree by age was calculated as y = 8993.9 ln (tree age-9) 8230.3, R² = 0.8531 (walnut in green peel) and y = 1647.1 ln (tree age-9) 1442.1, R² = 0.8527 (dried shell walnut).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.11
• /
• pp.1571-1577
• /
• 2013

Electrical tree structure is one of the most important influencing factors for electrical treeing characteristics in polymers. In this paper, we focused on the structure characteristics of electrical treeing in epoxy resins (original) insulation under different high-frequency voltages (60, 500, 1000Hz). Effects of voltage frequency on the ac electrical treeing phenomena in an epoxy resins were carried out in needle-plate electrode arrangement. To measure the treeing initiation and propagation, and the breakdown rate, constant AC of 10 kV with three different voltage frequencies (60, 500 and 1,000 Hz) was applied to the specimen in needle-plate electrode specimen at $30^{\circ}C$ of insulating oil bath. At 60 Hz, the treeing initiation time was 360 min and the propagation rate was $6.85{\times}10^{-4}mm/min$, and the morphology was dense branch type. As the voltage frequency increased, the treeing initiation time decreased and the propagation rate increased. At 1,000 Hz, the treeing initiation time was 0 min and the propagation rate was $7.81{\times}10^{-2}mm/min$, and the morphology was dense bush type.

• Journal of Korean Society of Forest Science
• /
• v.85 no.1
• /
• pp.120-129
• /
• 1996

This study was carried out to investigate the hydraulic architecture such as relative hydraulic conductivity, Leaf specific conductivity(LSC), Huber value, Specific conductivity of the stem, branch and Junctions of stem-to-branch in Quercus mongolica trees. The hydraulic architecture of various hydraulic conductivities of stem and branch was described. The results obtained were summarized as follows : 1. The range of relative hydraulic conductivity was $2.5526{\times}10^{-12}$ to $1.2260{\times}10^{-10}m^2$ in stems, $1.6279{\times}10^{-11}$ to $6.8378{\times}10^{-11}m^2$ in branches. The relative hydraulic conductivities increased with decreasing diameter of stem and branch. The relative hydraulic conductivity of one-year-old terminal shoots were two times greater than that of the lateral shoots. 2. LSC value was larger at the top than at the base in stem. LSC is much smaller in branches than in stem ; especially smallest at branching part. 3. Hydraulic conductivities of the branching part appeared the different values with the 4 type and 4 type. Relative hydraulic conductivity, LSC, Specific conductivity and mean vessel diameter in type branching part were larger in stem than in branch part, but not found in the branching part of Y type. 4. LSC and Specific conductivity of stem increased with decreasing diameter, but Huber value slowly increased with decreasing diameter ; especially highest at less than 1cm diameter. 5. LSC, Huber value, and mean diameter of vessels were larger at 1-year-old leader shoots than at lateral shoots. 6. The mean vessel diameter in various parts of a tree decreased with decreasing diameter of stem, but the number of vessels per unit area($mm^{-2}$) increased reversely. Mean vessel diameter in stem decreased sharply at earlywood and slowly at latewood with decreasing diameter of stem.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.548-556
• /
• 2022

In this study, basic data were obtained to determine the optimal cultivation method to achieve stable fruiting and yield increase in "Cheonhwang" jujube trees. Accordingly, thefructification, fruit characteristics, and yield according to tree age were analyzed. The mean (and range of) tree height, crown area, stem diameter near the root, clear stem length, number of main branches, and distance between main branches were 235.6 (217.4-253.8) cm, 3.5 (3.1-4.1) m², 5.5 (4.0-7.1) cm, 70.6 (66.2-72.7) cm, 9.7 (8.6-10.5), and 10.4 (7.9-14.2) cm, respectively. Correlationanalysis results indicated that tree age was positively correlated with crown area, stem diameter near the root, and clear stem length but not with the number of main branches. The mean number (and range) of fruit per fruit-bearing mother shoot and tree were 18.3 (16.7-18.3) and 170.7 (157.9-178.3), respectively. Tree age was not significantlycorrelated with fruiting characteristics (i.e., the numbers of fruit-bearing mother shoots per main branch, fruit-bearing shoots per fruit-bearing mother shoot, fruit per fruit-bearing shoot, and fruit per tree). Given that the shape of jujube trees is constantly managed according to the growing area and greenhouse type, the tree growth characteristics were more affected by tree management techniques than by tree age. The mean (and range of) fruit weight, fruit hardness, and soluble solid content were 28.6 (27.7-30.3) g, 29.4 (28.5-30.4) N, and 20.4 (19.3-21.0) °brix, respectively, and these fruit characteristics were not significantly correlated with tree age.The average yield per tree of the 'Cheonhwang' jujube cultivar was 4.9 (4.8-5.0) kg, which was not significantly correlated with tree age.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.4
• /
• pp.1-7
• /
• 2023

Chwibyeong is a hedge made into a folding screen shape by setting up supports and placing plants on it. Traces of chwibyeong can be found in various paintings, such as the 『Donggwoldo painting of Changdeokgung Palace』, 『Gyujanggak painting』, 『Munhuimyo painting』, and 『Hwaseong Temporary Palace painting depicting Suwon Hwaseong Temporary Palace』. However, since the Chwibyeong has not survived to this day, the whereabouts of the Chwibyeong were estimated through ancient documents, old paintings, and photographs. In the case of a manned Chwibyeong using a support, a picture related to the composition of the Chwibyeong using a base can be Winnow willow. Methods for creating intoxicants using coniferous trees such as Chinese juniper and Rigid-branch yew have been studied. In existing old paintings, only the supports, parts of leaves, and branches were depicted, so the location of the Chwibyeong could not be confirmed through the drawings. However, in the 『Jungli-Euiguae』, written around 1797, a manned type of Chwibyeong using a support was depicted as the material of the Chwibyeong. By being able to confirm the type of tree used, it was possible to confirm the method of creating a Chwibyeong using Winnow willow introduced in the 『LimwonGyeongjeji』. However, in the 『Jungli-Euiguae』, written around 1797, a manned type of Chwibyeong using a support was depicted as the material of the Chwibyeong. By being able to confirm the type of tree used, it was possible to confirm the method of creating a Chwibyeong using Winnow willow introduced in the 『LimwonGyeongjeji』. Therefore, the purpose of this study is to suggest a method of using Chwibyeong to restore by analyzing old literature. For this purpose, first, the process of change in the material of the Chwibyeong was analyzed through the analysis of old documents showing the method of forming the Chwibyeong. Second, the material and composition method of the Chwibyeong were analyzed through the analysis of the picture of "Seongyeok-do" in 『Jungli-Euiguae』, which allows us to understand the form of the Chwibyeong

• Advances in nano research
• /
• v.12 no.5
• /
• pp.489-499
• /
• 2022

Nanofluids have recently triggered a substantial scientific interest as cooling media. However, their stability is challenging for successful engagement in industrial applications. Different factors, including temperature, nanoparticles and base fluids characteristics, pH, ultrasonic power and frequency, agitation time, and surfactant type and concentration, determine the nanofluid stability regime. Indeed, it is often too complicated and even impossible to accurately find the conditions resulting in a stabilized nanofluid. Furthermore, there are no empirical, semi-empirical, and even intelligent scenarios for anticipating the stability of nanofluids. Therefore, this study introduces a straightforward and reliable intelligent classifier for discriminating among the stability regimes of alumina-water nanofluids based on the Zeta potential margins. In this regard, various intelligent classifiers (i.e., deep learning and multilayer perceptron neural network, decision tree, GoogleNet, and multi-output least squares support vector regression) have been designed, and their classification accuracy was compared. This comparison approved that the multilayer perceptron neural network (MLPNN) with the SoftMax activation function trained by the Bayesian regularization algorithm is the best classifier for the considered task. This intelligent classifier accurately detects the stability regimes of more than 90% of 345 different nanofluid samples. The overall classification accuracy and misclassification percent of 90.1% and 9.9% have been achieved by this model. This research is the first try toward anticipting the stability of water-alumin nanofluids from some easily measured independent variables.