• Journal of Korean Society of Forest Science
• /
• v.89 no.2
• /
• pp.249-255
• /
• 2000

This study has been carried out to estimate aboveground biomass and net primary production in a 22-year-old Betula platyphylla and 24-year-old juglans mandshurica plantations. Nine sample trees were cut in each plantation. Estimations for aboveground biomass and net primary production were made by the equation model $Wt=aD^b$ where Wt is ovendry weight in kg and D is DBH in cm. Total aboveground biomass was 79.33t/ha in Betula platyphylla plantation and 67.47t/ha in Juglans mandshurica plantation. The proportion of each tree component to total aboveground biomass was high in order of bolewood, branches, bolebark, and leaves in the two plantations. Aboveground total net primary production was estimated at 9,92t/ha in Betula platyphylla plantation and 11.79t/ha in Juglans mandshurica plantation. There was greater net primary production in Juglans mandshurica plantation than in Betula platyphylla plantation because of greater bolewood, bolebark, current twig, and branch net primary productions in Juglans mandshurica plantation than in Betula platyphylla plantation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.5
• /
• pp.436-441
• /
• 1992

This study was carried out to discuss the influences of the different fertilizer levels and plant densities on the flowering and balling in cotton in Mokpo Branch Station, Crop Experiment Station in 1991. The cotton flowered 67% before Aug. 25 which is the limit date of picked-cotton harvest, and the ratio of flowering for stalk-cut cotton was 30%. The 1.5 times fertilizer levels and the 70cm row density had more flower buds, flowers and bolls per m$^2$ than any other treatment plot. The crop growing was bad in dense planting due to the nutrient deficiency. The flowering ratio to flower bud was about 70%, and the balling ratio to flower numbers was about 48%. The bolling ratio was lower in the case of more flower number. The shedding ratio of flower buds was about 30% in average and showed increasing tendency by dense planting. It was observed that the higher ratio of bud shedding tended to accompany with shedding the lower ratio of boll shedding.

• Korean Journal of Agricultural Science
• /
• v.49 no.4
• /
• pp.881-892
• /
• 2022

Fire blight in apple and pear orchards, caused by Erwinia amylovora, is a global problem. Ongoing outbreaks have occurred since 2015. In 2020, 744 orchards were infected compared with 43 orchards in 2015 in Korea. When are insufficient. In Korea, all host plants in infected orchards are buried deeply with lime to eradicate the E. amylovora outbreak within a few days. Apple trees with infected trunks and branches and twigs with infected leaves and infected blooms were collected from an apple orchard in Chungju, Chungbuk province, where fire blight occurred in 2020. We used these samples to investigate the population density and internal distribution of E. amylovora on infected branches and twigs during early season infections. Infected branches and twigs were cut at 10 cm intervals from the infected site, and E. amylovora was isolated from tissue lysates to measure population density (colony-forming unit [CFU]·mL^-1). The polymerase chain reaction was performed on genomic DNA using E. amylovora specific primers. Real-time polymerase chain reaction (PCR) was performed to detect E. amylovora in asymptomatic tissue. The objective of these assays was to collect data relevant to the removal of branches from infected trees during early season infection. In infected branches, high densities of greater than 10⁶ CFU·mL^-1 E. amylovora were detected within 20 cm of the infected sites. Low densities ranging from 10² to 10⁶ CFU·mL^-1 E. amylovora were found in asymptomatic tissues at distances of 40 - 75 cm from an infection site.

• ALGAE
• /
• v.21 no.1
• /
• pp.109-124
• /
• 2006

Responses to various types of mechanically induced wounding were followed in the giant-celled Caulerpalean species, Derbesia tenuissima, using time-lapse video-microscopy. Gametophyte vesicle cells. Puncture wounding: the gametophyte cell seals the puncture in 5 min. This is followed by cycles of ruptures and sealing, ending with full recovery in 24 hrs. Cut wounding: the protoplast immediately retracts away from the wall and reforms an intact, deflated protoplast that expands to fill the original cell within 21 hrs. Crush wounding (internal). When retained within the cell wall many protoplast fragments condense, round up, and coalesce; the reconstituted protoplast expands until it attains complete recovery, filling the original cell shape in 12 hrs. Crush wounding (external). Protoplast fragments extruded from the crushed cell are more numerous and smaller taking longer to recover. Most fragments become spherical, transforming into small viable cells capable of reproduction in several days. Sporophyte filaments. Crush wounding creates many small fragments that initially condense, coalesce and then expand within the wall to restore a complete filament with normal cytoplasmic streaming within 5 hrs. Reproduction: gametophyte. Our culture isolates produce more females than males (30:1). Gametangia develop one day before discharge that occurs explosively (1/6 sec) at first morning light. The vesicle cell forms successive gametangia every 14 days. Sporophyte. Each sporangium develops on a lateral branch that becomes isolated by the creation of successive basal plugs. After cytoplasmic cleavage and differentiation the stephanokont spores are discharged. The spores settle quickly and germinate forming gametophyte cells.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.6
• /
• pp.319-322
• /
• 1997

The optimal conditions for callus formation and plant regeneration were determined by the manipulation of culture method in unpollinated ovary culture of rice. The effect of cold pretreatment on callus formation and plant regeneration varied with duration of pretreatment. The maximum frequency (38.7%) of plant regeneration was obtained from the unpollinated ovary pretreated for 10 days at $12^{\circ}C$. The ability of callus formation and plant regeneration was higher on the medium with picloram (1 mg/L) than that of 2, 4-D (1 mg/L). However, the high concentration of picloram increased markedly the frequency of albino plant from unpollinated ovary-derived callus. Floral parts inoculated as a unit play important roles in callus formation and plant regeneration. Best result was obtained when ovary with partial cut glume, pedicel and secondary branch as a unit was cultured.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4A
• /
• pp.288-295
• /
• 2005

OFDM communications system is very attractive for the high data rate wireless transmission. However, it may be distorted in the nonlinear HPA since OFDM signal has high PAPR. So, a new SLM method using dummy sequence is studied for reducing the PAPR, and we call it DSI-SLM method. Unlike the conventional SLM method using the phase rotation, dummy sequences for PAPR reduction are assigned at the predefined sub-carriers. After IFFT, the OFDM data signal of the lowest PAPR is selected to transmit. So, it can cut down the computational complexity because it does not require the transmission and demodulation process of side information about the phase rotation. This proposed method can solve the time delay problem so that PAPR reduction can be made in real time processing.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.765-768
• /
• 2005

In this paper, high LO-RF isolation 94 GHz MMIC single-balanced mixer was designed and fabricated using a branch line coupler and a ${\lambda}/4$ transmission line. The 94 GHz MMIC single-balanced mixer was designed using the 0.1 ${\mu}m$ InGaAs/InAlAs/GaAs Metamorphic HEMT(MHEMT) diode. The fabricated MHEMT was obtained the cut-off frequency($f_T$) of 189 GHz and the maximum oscillation frequency($f_{max}$) of 334 GHz. The designed MMIC single-balanced mixer was fabricated using 0.1 ${\mu}m$ MHEMT MMIC process. From the measurement, the conversion loss of the single-balanced mixer was 23.1 dB at an LO power of 10 dBm. The LO-RF isolations of single-balanced mixer was obtained 45.5 dB at 94.19 GHz. We obtained in this study a higher LO-RF isolation compared to some other balanced mixers in millimeter-wave frequencies.

• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.122-129
• /
• 2007

Generally, many kinds of phase unwrapping algorithm are used to obtain three-dimensional features in digital holography. The Goldstein algorithm is ra epresentative method. which requires small memory capacity and short execution time fer an unwrapping process. However, the Goldstein algorithm has some problems when the dipole residue is located at the boundary. When the opposite residues are located at the boundary and the distance between the opposite residues is longer than the boundary, an incorrect branch cut occurs and results in incorrect calculation. We have modified the Goldstein algorithm to solve the incorrect calculation problem using boundary information. We found that the modified Goldstein algorithm could resolve the Goldstein algorithm's problem.

• Korean Journal of Optics and Photonics
• /
• v.19 no.1
• /
• pp.73-79
• /
• 2008

We propose a novel metal-waveguide structure for sustaining long-range surface-plasmon-polaritons (LRSPP). The LRSPP waveguides are composed basically of two asymmetric metal layers: a very thin, finite-width metal strip on top of a metal slab with a dielectric gap in between them. Mode cut-off of LRSPPs excited on the double-metal waveguides is characterized by consistently investigating their dispersion relations and mode profiles. We also confirm experimentally the existence of low-loss, well-confined LRSPP modes by measuring far-field outputs emerging from an edge of the asymmetric double-metal waveguides. In the experiment, we have fabricated several types of SPP waveguide devices including straight lines, S-bend, and Y-branch consisting of gold strips (20 nm-thick, $5{\mu}m$-wide). Overall propagation loss of the proposed double-metal waveguides is quite comparable to that of single metal-strip waveguides, in addition the mode sizes can be tuned by increasing the core-insulator gap between the metal layers to get a higher coupling efficiency with a single-mode fiber in telecom wavelength. The proposed LRSPP waveguides may open up realization of SPP-waveguide sensors or nonlinear SPP-devices by replacing the core-insulator with a bio-fluid or a nonlinear medium.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.6 s.336
• /
• pp.67-74
• /
• 2005

In this paper, high LO-RF isolation W-band MIMIC single-balanced mixer was designed and fabricated using a branch line coupler and a $\lambda$/4 transmission line. The simulation results of the designed 94 GHz balun show return loss of -27.9 dB, coupling of -4.26 dB, and thru of -3.77 dB at 94 GHz, respectively. The isolation and phase difference were 23.5 dB and $180.2^{\circ}$ at 94 GHz. The W-band MIMIC single-balanced mixer was designed using the 0.1 $\mu$m InGaAs/InAlAs/GaAs Metamorphic HEMT diode. The fabricated MHEMT was obtained the cut-off frequency(fT) of 189 GHz and the maximum oscillation frequency(fmax) of 334 GHz. The designed MIMIC single-balanced mixer was fabricated using 0.1 $\mu$m MHEMT MIMIC Process. From the measurement, the conversion loss of the single-balanced mixer was 23.1 dB at an LO power of 10 dBm. Pl dB(1 dB compression point) of input and output were 10 dBm and -13.9 dBm respectively. The LO-RF isolations of single-balanced mixer was obtained 45.5 dB at 94.19 GHz. We obtained in this study a higher LO-RF isolation compared to some other balanced mixers in millimeter-wave frequencies.