• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2001

Additive and dominance genetic variances were estimated for purebred Landrace selected with line breeding from 1989 to 1995 at Miyazaki Livestock Experiment Station, Kawaminami Branch. Ten body measurements, two reproductive traits and fifteen carcass traits were analyzed with single-trait mixed model analysis. The estimates of narrow-sense heritabilities by additive model were in the range of 0.07 to 0.46 for body measurements, 0.05 to 0.14 for reproductive traits, and 0.05 to 0.68 for carcass traits. The additive model tended to slightly overestimate the narrow-sense heritabilities as compared to the additive and dominance model. The proportion of the dominance variance to total genetic variance ranged from 0.11 to 0.91 for body measurements, 0.00 to 0.65 for reproductive traits, and 0.00 to 0.86 for carcass traits. Large differences among traits were found in the ratio of dominance to total genetic variance. These results suggested that dominance effect would affect the expression of all ten body measurements, one reproductive trait, and nine carcass traits. It is justified to consider the dominance effects in genetic evaluation of the selected lines for those traits.

• The Journal of the Korea Contents Association
• /
• v.6 no.4
• /
• pp.46-54
• /
• 2006

We propose an optimization method for PCB assembly lines including multiple surface mounters. To increase the productivity of PCB assembly line, the component allocation, feeder assignment, and assembly sequence of each surface mounter should be optimized. The optimization Problem is formulated as an integer programming problem. We divide the overall problem into two hierarchical sub-problems: forward-path problem and backward-path problem. The clustering algorithm and branch-and-bound algorithm are applied to solve the forward-path problem. The assignment algorithm and connection algorithm are applied to solve the backward-path problem. Simulation results are presented to verify the usefulness of the proposed method.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.1
• /
• pp.53-58
• /
• 1998

The $H{\beta}$ and some metal line indices, such as Mg2, Fe52 of single-age and single-metallicity populations are computed based on the method of evolutionary population synthesis, with careful consideration of the variation of the horizontal-branch morphology with metallicity and age. We find (a) that while metal lines are little af-fected, the $H{\beta}$ index is severely enhanced (up to 30%)by the presence of the blue horizontal-branch stars, frustrating the current age-estimations from this index with out careful consideration of these stars, and (b) that there is a systematic trend in the sense that the globular clusters in giant elliptical galaxies appear to be older than those in our Galaxy by several billion years. We also calculate these indices for the stellar populations with a metallicity spread, by adopting metallicity distribution functions predicted by chemical evolution models. The comparison of the models with the observed indices of the central regions of the early-type galaxies yields the results (a) that the ages of the giant elliptical galaxies would be older than the previous estimations by several billion years, and (b) that there is a considerable age spread among elliptical galaxies, in the sense that the giant elliptical galaxies are older than small ones.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.3
• /
• pp.40-47
• /
• 2011

KSNPs(Korea Standard Nuclear Power Plant) have been applied the break exclusion criteria to the high energy lines passing through containment penetration area to ensure that piping failures would not cause the loss of containment isolation function, and to reduce the resulting dynamic effects. Systems with the criteria are the Main Steam system, Feed Water system, Steam Generator Blowdown system, and Chemical & Volume Control system. In accordance with FSAR(Final Safety Analysis Report), a 100% volumetric examination by augmented in-service inspection of all pipe welds appled the break exclusion criteria is required for the break exclusion application piping. However, it is difficult to fully satisfy the requirements of inspection because 12", 8" and 6" weldolet weldments of Main Steam pipe line have complex structural shapes. To resolve the difficulty on the application of conventional UT(Ultrasonic Testing) technique, realistic mock-ups and UT calibration blocks were made. Simulations of conventional UT were performed utilizing CIVA, a commercial NDE(Nondestructive Examination) simulation software. Phased array UT experiments were performed through mock-up including artificial notch type flaws. A phased array UT technique is finally developed to improve the reliability of ultrasonic test at main steam line pipe to 12", 8" and 6" branch connection weld.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.1
• /
• pp.46-55
• /
• 2005

This paper proposes a new method for choice of the best transmission system expansion plan on the side of highest satisfaction level of decision maker using fuzzy integer programming. The proposed method considers the permissibility and ambiguity of the investment budget (economics) for constructing the new transmission lines and the delivery marginal rate (reliability criteria) of the system by modeling the transmission expansion problem as a fuzzy integer programming one. It solves the optimal strategy (reasonable as well as flexible) using a fuzzy set theory-based on branch and bound method that utilizes a network flow approach and the maximum flow-minimum cut set theorem. Under no or only a very small database for the evaluation of reliability indices, the proposed technique provides the decision maker with a valuable and practical tool to solve the transmission expansion problem considering problem uncertainties. Test results on the 63-bus test system show that the proposed method is practical and efficiently applicable to transmission expansion planning.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.5
• /
• pp.444-449
• /
• 2009

This paper presents the design of a dual band branch line hybrid coupler(BLHC) with different power division ratios at two bands. In the proposed design, transmission lines of the BLHC are transformed to $\pi$-type equivalent circuits which represent different impedances and $\lambda/4$ electrical length at two frequency bands. In order to verify the proposed method, a dual band coupler with different power division ratios is designed for 0.9 GHz and 2 GHz applications. The desired power division ratios are 1:1 and 1:3 at the two operating frequency bands. The measured results show excellent performance with an insertion loss of less than 0.33 dB, a return loss of less than -18.07 dB, and good isolation characteristics.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.1
• /
• pp.5-7
• /
• 2022

KEPCO's plan is undergoing a trial operation to replace the open-loop section with ring main units configuration where underground distribution lines are installed, by linking the multi-way circuit breakers auto (MCA) on the power side of each pad-mounted transformer. However, ring main units application mentioned above may cause the ripple effects, when implementing the configuration without a study of protection coordination. Because ring main units with classical pre-set protection devices contribution in fault condition didn't consider yet. For the reliable ring main units operation, it is necessary to resolve several protection issues such as the protection coordination with substation side, prevention of the transformer inrush current. These issues can radically deteriorate the distribution system reliability Hence, it is essential to design proper protection coordination to reduce these types of problems. This paper presents a scheme of ring main units' configuration and MCA's settings of time-current curves to preserve the performance of protection coordination among the switchgears considering constraints, e.g. prevention of the ripple effects (on the branch section when a transformer failure occurs and the mainline when a branch line failure occurs). It was confirmed that the propagation of the failure for each interrupter segment could be minimized by applying the proposed TCC and the interrupter settings for the MCAs (branch, transformer). Further, it was verified that the undetected area of the distribution automation system (DAS) could be supplemented by having the MCA configurated ring main units operate first, instead of the internal protection equipment in the transformer such as the fuse, STP when a transformer failure occurs.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.21-21
• /
• 2017

Severe lodging has recurrently occurred at strong typhoon's hitting in recent climate change. The identification of quantitative trait loci (QTLs) and their responsible genes associated with a strong culm and their pyramiding are important for developing high-yielding varieties with a superior lodging resistance. To identify QTLs for lodging resistance, the tropical japonica line, Chugoku 117 and the improved indica variety, Habataki were selected as the donor parent, as these had thick and strong culms compared with the temperate japonica varieties in Japan such as Koshihikari. By using chromosome segment substitution lines (CSSLs) in which chromosome segments from the japonica variety were replaced to them from Habataki, we identified the QTLs for strong culm on chrs. 1 and 6, which were designated as STRONG CULM1 (SCM1) and STRONG CULM2 (SCM2), respectively. By using recombinant inbred lines (BILs) derived from a cross between Chugoku 117 and Koshihikari and introgression lines, we also identified the other QTLs for strong culm on chrs. 3 and 2, which were designated as STRONG CULM3 (SCM3) and STRONG CULM4 (SCM4), respectively. Candidate region of SCM1 includes Gn1 related to grain number. SCM2 was identical to APO1, a gene related to the control of panicle branch number, and SCM3 was identical to FC1, a strigolactone signaling associated gene, by performing fine mapping and positional cloning of these genes. To evaluate the effects of SCM1~SCM4 on lodging resistance, the Koshihiakri near isogenic line (NIL) with the introgressed SCM1 or SCM2 locus of Habataki (NIL-SCM1, NIL-SCM2) and the another Koshihikari NIL with the introgeressed SCM3 or SCM4 locus of Chugoku 117 (NIL-SCM3, NIL-SCM4) were developed. Then, we developed the pyramiding lines with double or triple combinations derived from step-by-step crosses among NIL-SCM1 NIL-SCM4. Triple pyramiding lines (NIL-SCM1+2+3, ~ NIL-SCM1+3+4) showed the largest culm diameter and the highest culm strength among the combinations and increased spikelet number due to the pleiotropic effects of these genes. Pyramiding of strong culm genes resulted in much increased culm thickness, culm strength and spikelet number due to their additive effect. SCM1 mainly contributed to enhance their pyramiding effect. These results in this study suggest the importance of identifying the combinations of superior alleles of strong culm genes among natural variation and pyramiding these genes for improving high-yielding varieties with a superior lodging resistance.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.2
• /
• pp.123-128
• /
• 2004

Hyoscyamine and scopolamine are two most common tropane alkaloids found in the Solanaceae. The pEB expression vector carrying Nspmt gene was transformed to Agrobacterium rhizogenes. The growth of transgenic hairy roots were approximately to 80% of the wild type root. Transgenic hairy roots are less developed on only their branch roots than those of the wild type root. The extracts from Nspmt transgenic hairy root lines, 3 and 5 contained between 3.52 and 4.23 mg/g dry weight as hyoscyamine and did between 5.23 to 6.40 mg/g dry weight as scopolamine. These results showed that the overexpression of the pmt gene enhanced tropane alkaloids production of S. parviflora transformed roots and this improvement affected both hyoscyamine and scopolamine production.

• Fisheries and Aquatic Sciences
• /
• v.15 no.4
• /
• pp.313-316
• /
• 2012

Two unrecorded species of the snapper, Lutjanus malabaricus (296.0 mm standard length [SL]) and L. stellatus (350.0 mm SL) belonging to the family Lutjanidae, were first collected from the western coastal waters of Jeju Island, Korea. L. malabaricus is characterized by having a dark marking on the upper half of the caudal peduncle, a band of vomerine teeth that does not protrude posteriorly at the middle, and nine anal soft rays. Compared to its Korean relative, L. malabaricus is distinguishable by having rows of scales that run obliquely in the dorsal-posterior direction above the lateral line (vs. parallel to the lateral line in L. argentimaculatus). L. stellatus can be identified by the absence of wavy blue lines on the head (vs. many blue lines in L. rivulatus) and presence of a white spot above the lateral line (vs. a black blotch on the lateral line in L. rivulatus). We propose new Korean names, "Jin-hong-tung-dom" and "Huin-jeom-tung-dom," for L. malabaricus and L. stellatus, respectively.