• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.250-252
• /
• 2004

The aim of this paper is to provide a guide to those methods of train detection which are available, or are likely to become available, to the designer of train control or other relevant systems. In broad terms, train detection may be defined as the process of generating information which describes the location and movement of trains. Train detection information is difficult to define in isolation. Consider, for example, the train detection information required in a modern train control system. This may vary considerably : in a future high performance train control system, it might be necessary to know the precise position, direction of movement, speed, and possibly even the acceleration or braking, of all trains in the control area : in a less demanding application, it might be sufficient to know only the location of trains in terms of the occupation of sections of track.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.348-354
• /
• 2000

An accumulator in hydraulic systems stores kinetic energy during braking action, and then that controls a hasty surge pressure. This study suggests a method ot determine the capacity of the accumulator to control surge pressure to a desired degree. A mathematical dynamic model of the system was derived and the parameters in the model were identified from experimental data. A series of computer simulation were done for the brake action. The results of the simulation work were compared with those of experiments. These results of the computer simulation and experiments shows that the proposed design method of the accumulator was verified in controlling surge pressure of the system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.4
• /
• pp.156-163
• /
• 1996

The brakes are the most important safety-critical accident avoidance components of a motor vehicle. They must perform safely under a variety of operating conditions and must have enough strength not to fail during the life of a vehicle. Recently, anti-lock brake systems are used on more and more passenger cars. The ABS brakes modulate brake line pressure to prevent brakes from locking during braking. In this study, finite element analysis, material test for FCD45, measurement of stress and cumulative fatigue damage analysis were performed to evaluate fatigue damage of the caliper housing under ABS mode.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.111-111
• /
• 2000

The research of network system, being used to reduce automotive wiring harness, is reaching to the development of by-wire system. It is by-wire system that apply IVN(In-Vehicle-Network) to steering, braking system, and it has the advantage of mass-decreasing, easy to diagnose fault and so on. But until now, many developed device can't satisfied with reliability that system have ever had. So redundancy of each network module, i.e., It is only way to make backup module. This paper researches development of network module and redundancy management of backup module when error occurred for implementation of brake-by-wire system.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.2
• /
• pp.69-74
• /
• 2004

In general the surge pressure generated in hydraulic systems causes noise, vibration and odd effect to the system. To reduce the surge pressure, high frequency PWM control of 20KHz was attempted. To estimate the braking noise caused by surge, a vehicle equipped with on-board ABS hydraulic modulator has been experimented with respect to the various breaking condition. Thorough this experiments, it was found that breaking noise has been reduced using high frequency PWM control method compare with low frequency method. To evaluate high frequency control m practice, including verification of general functionality, EMI tests was experimented. Its was found that it is necessary to have the solution to electromagnetic interference(EMI) generated by switching elements.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.141-146
• /
• 2000

It has many variables and factors to design the friction materials for automotive brake pads. In this study, the friction and wear characteristics of automotive blake pads have been studied using 1:l full size dynamo meter. Using conventional manners, it takes a great of time and efforts to know that it affects the each raw materials for friction characteristics. For the purpose of examining the effect of each major raw materials, we used the more convenient Taguchi L9 ($3^4$) orthogonal matrix and 1/5 scale dynamo machine for evaluation of the friction characteristics of composite brake pads.

• Smart Structures and Systems
• /
• v.25 no.1
• /
• pp.105-109
• /
• 2020

The authors address the problem of ameliorating or updating existing educational buildings. This building typology is quite sensitive to social and media pressure, mainly when accidents have occurred nearby. When a building is classified as unsatisfactory, the current code requirements oblige one to re-design the building with significant penalty factors in the resistance values. Often the only solution is to destroy the existing facility and to build a new one. When attempting to preserve the existing building, higher levels of safety are demanded by the society and this can only be achieved by innovative system architectures. The authors propose and discuss a prototype that can be easily adopted to retrofit small educational buildings as the ones common in small municipalities. The higher performance is pursued by a special design of the control scheme, with new control devices and special control laws.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.802-805
• /
• 2003

The aim of this paper is to provide a guide to those methods of train detection which are available, or are likely to become available, to the designer of train control or other relevant systems. In broad terms, train detection may be defined as the process of generating information which describes the location and movement of trains. Train detection information is difficult to define in isolation. Consider, for example, the train detection information required in a modern train control system. This may vary considerably : in a future high performance train control system, it might be necessary to know the precise position, direction of movement, speed, and possibly even the acceleration or braking, of all trains in the control area : in a less demanding application, it might be sufficient to know only the location of trains in terms of the occupation of sections of track.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.162.3-162
• /
• 2001

The essence of ABS(Anti-skid Brake System) control is to continuously adjust brake pressure to maintain optimum brake torque. This optimum level should balance tire and runway friction its peak value, yielding maximum braking deceleration. It influences not only the deceleration and the taxing distance of an aircraft, but also the strength and the fatigue life of the landing gear. In this paper, an ABS control algorithm is developed with a dynamics model of 5-DOFD(Degree of Freedom). The algorithm is verified by simulations and the simulation results are presented. The dynamics model is simulated by the computer.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.8
• /
• pp.146-154
• /
• 1997

Solenoid-folw control type ABS is used with a 'dump and reapply' pressure control arrangement instead of using 2/2 (normal open/close) solenoid valves in convensional systems(sol. -sol. control type), a flow control valve is used which replaces the (no) inlet valve. The flow control valve controls fluid flow providing a nearly constant reapply rate( .theta. ) after the dump plase of ABS operation. In this study, to investigate a characteristics of brake pressure by PWM control, test rig was consisted of ABS hydraulic modulator, digital controller, pneumatic power supply and brake master cylinder. For comparison with experi- mental results, system modelling and computer simulation were performed. As a result, experiment results showed fairly agreement with the simulation. Also, it is shown that the pressure gradient (tan .theta. ) is affected by pressure, frequency, duty ratio and expressed with an exponential funtion.