• International Journal of Automotive Technology
• /
• 제3권4호
• /
• pp.165-170
• /
• 2002

For a vehicle Anti-lock Braking System (ABS), the control target is to maintain friction coefficients within maximum range to ensure minimum stopping distance and vehicle stability. But in order to achieve a directionally stable maneuver, tire side forces must be considered along with the braking friction. Focusing on combined braking and turning operation conditions, this paper presents a new control scheme for an ABS controller design, which calculates optimal target wheel slip ratio on-line based on vehicle dynamic states and prevailing road condition. A fuzzy logic approach is applied to maintain the optimal target slip ratio so that the best compromise between braking deceleration, stopping distance and direction stability performances can be obtained for the vehicle. The scheme is implemented using an 8-DOF nonlinear vehicle model and simulation tests were carried out in different conditions. The simulation results show that the proposed scheme is robust and effective. Compared with a fixed-slip ratio scheme, the stopping distance can be decreased with satisfactory directional control performance meanwhile.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.342-345
• /
• 1997

To achieve adequate brake performance in high-speed trains the brake system should : ${\bullet}$ offer high reliability and high availability, ${\bullet}$ permit deceleration of the train with as little wear as possible, and ${\bullet}$ display good control characteristics with, if possible, infinitely variable control of the braking effort. For these reasons, high-speed train is to be equipped with three different and largely independent brake system : ${\bullet}$ a regenerative brake with regenerative feedback in the driven cars, ${\bullet}$ a linear eddy-current brake in the nondriven cars and ${\bullet}$ a pneumatic disc brake in all cars. This paper describes the conceptual design of braking system for Korea High Speed Train with the maximum speed of 350km/h

• 한국산학기술학회논문지
• /
• 제21권6호
• /
• pp.170-177
• /
• 2020

본 논문은 전기기계식제동장치(EMB : Electro Mechanical Brake, 이하 EMB)의 제동 압부력(clamping force) 제어방법과 제동시험장비(dynamo test equipment)를 활용한 제동성능 평가결과에 대하여 다룬다. EMB와 관련한 연구는 자동차 분야에서 대부분 수행되었으며, 다양한 제어방법에 대한 정적상태의 압부력 시험결과를 주로 다루고 있으나 본 논문은 동적상태에서의 성능평가를 수행하였다. EMB의 구동을 위해 3상 매입형 영구자석 동기전동기(IPMSM : Interior Permanent Magnet Synchronous Motor, 이하 IPMSM)가 적용되었으며 유한요소법(FEM : Finite Element Method, 이하 FEM) 해석 소프트웨어인 JMAG을 통하여 설계 및 해석을 수행하였다. EMB의 압부력제어를 위해 전류제어, 속도제어 및 위치제어가 수행되었으며, 전류제어기는 단위전류당 최대토크제어(MTPA : Maximum Torque Per Ampere, 이하 MTPA)가 적용되었다. 제동성능평가는 공압식 제동장치의 비상제동 성능시험 절차와 동일한 방법으로 수행되었으며 시험장비에 설치된 고속철도차량의 차륜을 110 km/h, 230 km/h 및 300 km/h로 회전하는 상태에서 각각의 속도 조건에 따른 EMB의 제동 압부력을 인가하여 감속성능을 확인하였다. 최고속도(300 km/h) 상태에서 비상제동 시험결과는 73초의 시간이 소요되었으며 차세대고속철도차량(HEMU-430X)에 적용된 공압식 제동장치의 성능시험 결과와 비교를 통하여 제동소요 시간 및 감속패턴의 유사함 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.383-386
• /
• 2005

An integrated analytical model which should have essential dynamics on the longitudinal railway vehicle is developed. The model consists of translational movement, rotational movement, brake actuator, adhesion force between rail and wheel, and brake friction force between wheel and pad. Thus, during the deceleration for stopping, a feedback controller controlling the brake cylinder pressure is designed to improve ride quality and to release friction problems. Through the developed model, the feasibility of controlling the cylinder pressure is verified for the better performances during braking.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.445-450
• /
• 2004

Recently, many studies have been performed and good results have been reported in literature on the prediction of the brake disk temperature. However, study on the brake fluid temperature is rarely found despite of its importance. In this study, brake fluid temperature is predicted according to material property of brake piston. For the analysis, a typical disk-pad brake system is modeled including the brake disk, pad, caliper, piston and brake fluid. Vehicle deceleration, weight distribution by deceleration, disc-pad heat division and the cooling of brake components are considered in the analysis of heat transfer. Unsteady-state temperature distribution are analyzed by using the finite element method and numerical results are compared with the vehicle test data

• 한국공작기계학회논문집
• /
• 제14권6호
• /
• pp.45-51
• /
• 2005

Braking performance of a vehicle can be significantly affected by the temperature increment in the brake system. Therefore, the important problem in brake system is to reduce the thermal effect by friction heat. Recently, many studies have been performed and good results have been reported on the prediction of the brake disk temperature. However, the study on the pad, piston and brake fluid temperature is rarely found despite of its importance. In this study, the temperature distribution of the disc brake system is studied according to the material properties of brake piston. Vehicle deceleration, weight distribution by deceleration, disc-pad heat division and the cooling of brake components are considered in the analysis of heat transfer. Unsteady state temperature distributions are analyzed by using the finite element method and the numerical results are compared with the experimental data.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.162.3-162
• /
• 2001

The essence of ABS(Anti-skid Brake System) control is to continuously adjust brake pressure to maintain optimum brake torque. This optimum level should balance tire and runway friction its peak value, yielding maximum braking deceleration. It influences not only the deceleration and the taxing distance of an aircraft, but also the strength and the fatigue life of the landing gear. In this paper, an ABS control algorithm is developed with a dynamics model of 5-DOFD(Degree of Freedom). The algorithm is verified by simulations and the simulation results are presented. The dynamics model is simulated by the computer.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.6-13
• /
• 2013

This study focuses on finding ECO driving patterns which consider driving safety of the ATO system train and reliability and which optimize efficiency of the driving energy consumption. Research results derived by performing simulation of those 5 models show that the emergency braking which affects safety of passenger and the machinery is minimized, and safe driving speed is maintained by the prohibition of drastic acceleration/deceleration, coasting and constant-speed driving. Therefore if this result is applied to the urban railway train by amending or making ATO program to save energy usage that improve environmental quality, its effects as ECO driving pattern is huge.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.887-895
• /
• 2018

본 논문은 수송량 증대를 위한 열차제어시스템의 안전거리 설계와 전동차 제동설계에 활용할 수 있는 제동모델을 제시한다. 제동모델을 위해 6량 1편성으로 운행되는 전동차의 제동특성을 시험하였다. 제동특성에 영향을 줄 수 있는 인자로는 마찰계수, 제동압력의 변화, 회생제동 등이 있으며 시험을 통해 확인하였다. 제동압력은 상용제동과 비상제동으로 구분하고 차량의 특성을 반영하였다. 주행하는 철도차량에 작용하는 외력은 주행저항을 측정 시험과 후처리 방법을 제시하고 있는 KS R 9217에 따라 시험을 수행하고 2차 다항식 형태로 해당 열차의 주행저항을 제시하였다. 차량의 재원, 마찰계수, 제동압력, 주행저항을 바탕으로 직선 평탄 선로를 주행하는 전동차의 동적 거동은 다물체 동역학 해석 소프트웨어를 이용하여 해석하였다. 해석결과는 상용제동과 비상제동에 대하여 시험결과와 비교 검증하였으며 상당히 합리적인 결과를 도출하였다. 검증된 모델은 제동초기 속도에 따른 정지거리를 분석하고 감속도 중심의 제동모델과 비교하였다. 또한, 운영기관의 마찰계수 한계치에 따라 열차제어시스템을 위한 안전거리는 변화할 수 있음을 확인하였다. 본 연구의 결과는 철도차량들을 연결하여 운행하는 열차의 동적 거동해석에 활용할 수 있을 뿐 아니라 차량 설계에서 제동에 영향을 미치는 다양한 선로환경 분석과 제동 성능향상의 기초자료로 활용할 수 있을 것으로 기대된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.315-320
• /
• 1988

This paper considers modelling and control of ABS(Anti-skid Brake System) which avoids dangerous wheel locking due to excessive brake pressure during the vehicle braking. The brake pressure is controlled by on and off's of solenoid valves via the variation of the wheel circumferential deceleration measured using tacho-sensors. The dynamic model between the brake pressure and the wheel acceleration of a vehicle is mathematically derived. The computer simulation shows that the threshold value of the on-off control is critical to the performance of the ABS.