• Journal of Information Display
• /
• v.3 no.3
• /
• pp.1-11
• /
• 2002

Multi-view function is important to three-dimensional displays without dedicated glasses. It is the reason that the observers earnestly desire to change their positions freely. Multi-viewing is also principal to the reality of three-dimensional (3D) image displayed on the screen. The display of projection type has the advantage that the number of viewing points can be easily increased according to the number of projectors. The authors research on multi-view projection display with hologram screen. Powerful directionality of the diffracted beam from hologram screen is required unlike two-dimensional (2D) display. We developed a new method that all diffracted beams satisfied the same Bragg condition and became sufficiently bright to observe the 3D image under usual indoor light. The principle is based on the essential Bragg diffraction in the three-dimensional space. Owing to such three-dimensional Bragg diffraction we achieved an excellent hologram screen that could be multiple reconstructed in spite of single recording. This hologram screen is able to answer arbitrary numbers of viewing points within wide viewing zone. The distortion of 3D image becomes also sufficiently small with the method of dividing the cross angle between illumination and diffraction beam.

• Journal of the Optical Society of Korea
• /
• v.1 no.1
• /
• pp.36-40
• /
• 1997

Bragg diffraction of a strong reference beam from a steady-state photorefractive grating is measured experimentally and an analytic prediction is derived from the coupled wave equations of two-beam energy coupling. The relation between Bragg diffraction and two-beam coupling is used to check the mechanism of photorefractive grating formation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.238-252
• /
• 1998

Diffraction anomalies in the periodic strip grating over a grounded dielectric layer are investigated for the plane wave incidence case of both arbitrary(oblique) incidence angle and arbitrary polarization by use of the spectral domain method combined with the sampling theorem. Some numerical results for the Bragg and Off-Bragg blazing phenomena for the cases of arbitrary incidence angle and polarization as well as TE and TM polarization are presented along with discussions on those phenomena.

• Journal of the Optical Society of Korea
• /
• v.17 no.4
• /
• pp.312-316
• /
• 2013

A novel fiber-optic sensor system is suggested in which fiber Bragg grating sensors are demodulated by a wavelength-sweeping fiber laser source and a spectrometer. The spectrometer consists of a diffraction grating and a 512-pixel photo-diode array. The reflected Bragg wavelength information is transformed into spatial intensity distribution on the photo-diode array. The peak locations linearly correspond to the Bragg wavelengths, regardless of the nonlinearities in the wavelength tuning mechanism of the fiber laser. The high power density of the fiber laser enables obtaining high signal-to-noise ratio outputs. The improved demodulation characteristics were experimentally demonstrated with a fiber Bragg grating sensor array with 5 gratings. The sensor outputs were in much more linear fashion compared with the conventional tunable band-pass filter demodulation. Also it showed advantages in signal processing, due to the high level of photo-diode array signals, over the broadband light source system, especially in measurement of fast varying dynamic physical quantities.

• Journal of the Optical Society of Korea
• /
• v.8 no.1
• /
• pp.6-12
• /
• 2004

Diffraction Bragg gratings consisting of metal (silver) nanoparticles are generated inside a soda-lime glass substrate. After ion-exchanging and annealing processes in the glass, the silver nanoparticles are first formed with the particle diameters of 10 nm ∼ 30 nm. By interfering two CW laser beams at ∼ 60 ${\mu}{\textrm}{m}$ deep under the surface of the nanoparticles-dispersed glass, Bragg gratings with thickness of 15 ${\mu}{\textrm}{m}$ and period of 3.5 ${\mu}{\textrm}{m}$ are generated. Diffraction efficiency of the gratings formed by two TE-polarized beams is three times higher than that by two TM-polarized beams. From this polarization dependence, we have found that strong coupling of the surface plasmons induced on the metal particles may contribute dominantly to generate the diffraction grating.

• Korean Journal of Optics and Photonics
• /
• v.16 no.2
• /
• pp.121-127
• /
• 2005

This paper presents the thermal characteristics of a Bragg grating recorded in photopolymer. We record hologram gratings using a 532 nm Nd : YAG laser in DuPont HRF 150-38 photopolymer films and analyze the diffraction efficiency versus thermal exposure conditions. For the case of recording after heating, the diffraction efficiency of the hologram is more than $70\%$ at $100^{\circ}C$ but is decreased exponentially at temperatures over $100^{\circ}C$. It is observed in the recording before heating that the diffraction efficiency of the hologram fixed by a UV light is increased to approximately $10\%$ at $100^{\circ}C$, but the holograms are erased at temperatures over $120^{\circ}C$.

• Journal of Korea Water Resources Association
• /
• v.35 no.6
• /
• pp.677-684
• /
• 2002

In this study, a finite element model is employed to simulate the diffraction of waves caused by a change of water depths. The model is firstly applied to the estimation of reflection coefficients of monochromatic waves over a sinusoidally varying topography. Predicted coefficients are compared with those of the eigenfunction expansion method and laboratory measurements. A good agreement is observed. The model is then used to investigate effects of heights of bottom topography and number of ripples on variation of reflection coefficients of monocromatic water waves.

• Journal of Korea Water Resources Association
• /
• v.33 no.6
• /
• pp.805-814
• /
• 2000

A numerical model based on the boundary element method is employed to describe diffraction of monochromatic water waves due to varying topographies. The model is firstly verified by comparing obtained reflection and transmission coefficients of waves over a trench to those of the eigenfunction expansion method. The model is then used to investigate the Bragg reflection of waves over sinusoidally varying topographies. Calculated reflection coefficients are compared to available laboratory measurements and semi-theoretical results. A reasonably good agreement is observed.served.

• Rubber Technology
• /
• v.9 no.1
• /
• pp.25-28
• /
• 2008

By combining the multi-faceted environmental responsiveness of polymer hydrogels with photonically active structures, there has been a significant effort to create color-tunable photonic crystal sensors by changing either the periodic spacing of the structure or the dielectric constants of the materials. Here, we show that reversible spiral and helical opal switches with both dimensional and optical functionalities that respond to environmental chemistry can be constructed. When the transparent opal switch is swollen in hydrophilic acetic acid, right-handed spirals and helices that exhibit angularly dependent colors from Bragg diffraction are formed. When the transparent opal switch is swollen in hydrophobic hexane, left-handed spirals which exhibit angularly dependent colors from Bragg diffraction are formed. When the transparent opal switch is swollen in hydrophobic hexane solvent, a left-handed spiral and helix with an angularly independent bluish color is formed. After deswelling, all switches returned back to the transparent planar state. These color-tunable, reversible spiral and helical opal switches can be useful as mechanical actuators, and electrical devices as well as optical components.

• Nuclear Engineering and Technology
• /
• v.34 no.1
• /
• pp.30-41
• /
• 2002

The neutron beam is fully characterized for the prompt gamma activation analysis facility at Hanaro in the Korea Atomic Energy Research Institute(KAERI). The facility uses thermal neutrons which are diffracted vertically from a horizontal beam port by a set of pyrolytic graphite(PG) crystals positioned at the Bragg angle of 45" Neutron spectra, neutron flux and Cd-ratio are determined for the three extraction modes of diffracted beam by means of the theoretical and experimental efforts. To obtain theoretical result, the reflectivity of pyrolytic graphite is calculated in the diffraction model for mosaic crystal and the angular divergence after diffraction by mosaic crystal is estimated from Monte Carlo simulation. The time-of-flight spectrometer and gold activation wire are used for measuring the neutron spectra. Both the calculated and measured spectra have proven that the unique feature of polychromatic beam obtained by PG crystals are useful for PGAA. The thermal neutron flux of 7.9$\times$107 n/cm$^2$s and the Cd-ratio of 266 for gold have been achieved at the sample position while the reactor operates at 24 MW The uniformity of beam flux is 12% in the central 1$\times$1 cm$^2$ area. Finally, the beam is briefly characterized by the effective velocity and temperature which are determined by measuring the prompt Y-ray spectra for thin and thick boron samples.ples.