• Journal of Information Processing Systems
• /
• 제15권5호
• /
• pp.1156-1170
• /
• 2019

In recent years, the problem of data drifted of the smart grid due to manual operation has been widely studied by researchers in the related domain areas. It has become an important research topic to effectively and reliably find the reasonable data needed in the Supervisory Control and Data Acquisition (SCADA) system has become an important research topic. This paper analyzes the data composition of the smart grid, and explains the power model in two smart grid applications, followed by an analysis on the application of each parameter in density-based spatial clustering of applications with noise (DBSCAN) algorithm. Then a comparison is carried out for the processing effects of the boxplot method, probability weight analysis method and DBSCAN clustering algorithm on the big data driven power grid. According to the comparison results, the performance of the DBSCAN algorithm outperforming other methods in processing effect. The experimental verification shows that the DBSCAN clustering algorithm can effectively screen the power grid data, thereby significantly improving the accuracy and reliability of the calculation result of the main grid's theoretical line loss.

• 한국해안·해양공학회논문집
• /
• 제26권4호
• /
• pp.207-216
• /
• 2014

총유기탄소(TOC)는 해양의 탄소순환 연구분야에서 직접적인 생물학적 지표로 이용되는 중요한 인자다. 가용한 TOC 자료가 상대적으로 화학적산소요구량(COD) 자료 보다 부족하기 때문에 COD 자료를 활용하여 TOC 자료를 추정할 수 있다. COD를 TOC 로의 변환 시 TOC 추정에 직접적으로 영향을 미치는 COD 관측자료에 포함된 이상자료의 탐지와 적절한 처리는 합리적이고 객관적으로 수행되어야 한다. 본 연구에서는 국내 연안해역에서 관측된 염분, COD 및 TOC 자료에 대한 최적회귀모형을 제시하였다. 최적회귀모형은 이상자료와 영향자료를 여러 가지 탐색방법으로 진단하여 제거 전 후의 자료 개수 변화, 변동계수 및 RMS 오차를 비교 및 분석하여 선택하였다. 연구수행 결과, Cook의 진단방법과 SIQR의 boxplot 방법을 조합한 방법이 가장 적절한 것으로 파악되었다. 최적 회귀 함수는 TOC(mg/L) = $0.44{\cdot}COD(mg/L)+1.53$ 이고, 결정계수는 0.47 정도로 나타났으며, RMS 오차는 0.85 mg/L이다. RMS 오차와 지레계수(leverage values)의 변동계수는 이상자료 제거 전에 비하여 각각 31%, 80%로 크게 감소되었다. 본 연구에서 제시된 방법을 통해 COD와 TOC 관측자료에 포함된 이상자료와 영향자료의 과도한 영향을 진단 및 제거하였기 때문에 보다 적절한 회귀곡선식을 제시할 수 있었다.

• 한국IT서비스학회지
• /
• 제15권1호
• /
• pp.167-178
• /
• 2016

Spectrum sensing in cognitive radio (CR) has a great role in order to utilize idle spectrum opportunistically, since it is responsible for making available dynamic spectrum access efficiently. In this research area, collaboration among multiple cognitive radio users has been proposed for the betterment of detection reliability. Even though cooperation among them improves the spectrum sensing performance, some falsely reporting malicious users may degrade the performance rigorously. In this article, we have studied the detection and nullifying the harmful effects of such malicious users by applying some well known outlier detection methods based on Grubb's test, Boxplot method and Dixon's test in cooperative spectrum sensing. Initially, the performance of each technique is compared and found that Boxplot method outperforms both Grubb's and Dixon's test for the case where multiple malicious users are present. Secondly, a new algorithm based on reputation and weight is developed to identify malicious users and cancel out their negative impact in final decision making. Simulation results demonstrate that the proposed scheme effectively identifies the malicious users and suppress their harmful effects at the fusion center to decide whether the spectrum is idle.

• 대한토목학회논문집
• /
• 제34권5호
• /
• pp.1455-1461
• /
• 2014

본 연구에서는 2011년 5월, 6월, 7월에 덕유산 덕곡제에서 관측된 플럭스자료를 이용하여 에디공분산방법으로부터 증발산량을 측정하는 경우 발생할 수 있는 연직방향 풍속의 이상치 판별 및 대체에 대한 통계적 분석을 실시하였다. 연직방향 풍속의 이상치를 파악하기 위해 적용된 통계분석방법은 사분위수를 바탕으로 상자그림(boxplot)의 분석결과 중에 이상치를 판별하기 위한 interquartile range (IQR)을 적용하여 이상치를 탐색하였다. 또한 삭제하거나 평균값으로 대체하는 방법을 통하여 보완된 연직방향 풍속자료를 이용하여 증발산량을 측정하였으며, 이를 보완전의 증발산량과 비교분석하였다. 비교분석한 결과에 의하면 이상치를 대체하기 전의 증발산량과 이상치를 대체한 후의 증발산량 사이에 차이를 보였으며, 특히 강우 시에 보다 큰 차이를 보였다. 따라서 증발산량 측정과정에서 발생하는 이상치를 보완하기 위해 이상치를 삭제하거나 대체하여 증발산량을 측정하는 것이 필요하다.

• 한국측량학회지
• /
• 제29권2호
• /
• pp.113-121
• /
• 2011

본 연구에서는 기하학적 정보를 바탕으로 생성된 유사도 기반의 면 객체 자동매칭 방법을 제안하였다. 이를 위하여 서로 다른 공간자료에서 교차되는 후보 매칭 쌍을 추출하고, CRITIC방법을 이용하여 연동 기준별 가중치를 자동으로 생성하여 선형조합으로 추출된 후보매칭 쌍 간의 형상유사도를 측정하였다. 이때, 훈련자료에서 조정된 상자도표의 특이점 탐색을 적용하여 도출된 임계값 이상인 경우가 매칭 쌍으로 탐색된다. 제안된 방법을 이종의 공간자료(수지치도 2.0과 도로명주소 기본도)의 일부지역에 적용한 결과, 시각적으로 형상이 유사하고 교차되는 면적이 넓은 건물객체가 매칭 되었으며, 통계적으로 F-Measure가 0.932로 높게 나타났다.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.397-403
• /
• 2020

In order to synchronize a remote system time to the reference time like Coordinated Universal Time (UTC), it is required to compare the time difference between the two clocks. The time comparison data may have some outliers and the time synchronization performance can be significantly degraded if the outliers are not removed. Therefore, it is required to employ an effective outlier detection algorithm for keeping high accurate system time. In this paper, an outlier detection method is presented for the time difference data of GNSS time transfer receivers. The time difference data between the system time and the GNSS usually have slopes because the remote system clock is under free running until synchronized to the reference clock time. For investigating the outlier detection performance of the proposed algorithm, simulations are performed by using the time difference data of a GNSS time transfer receiver corrected to a free running Cesium clock with intentionally inserted outliers. From the simulation, it is investigated that the proposed algorithm can effectively detect the inserted outliers while conventional methods such as modified Z-score and adjusted boxplot cannot. Furthermore, it is also observed that the synchronization performance can be degraded to more than 15% with 20 outliers compared to that of original data without outliers.

• Structural Engineering and Mechanics
• /
• 제87권3호
• /
• pp.221-229
• /
• 2023

Urbanization and industrialization have significantly increased the amount of solid waste produced in recent decades, posing considerable disposal problems and environmental burdens. The practice of waste utilization in concrete has gained popularity among construction practitioners and researchers for the efficient use of resources and the transition to the circular economy in construction. This study employed Lytag aggregate, an environmentally friendly pulverized fuel ash-based lightweight aggregate, as a substitute for natural coarse aggregate. At the same time, fly ash, an industrial by-product, was used as a partial substitute for cement. Concrete mix M20 was experimented with using fly ash and Lytag lightweight aggregate. The percentages of fly ash that make up the replacements were 5%, 10%, 15%, 20%, and 25%. The Compressive Strength (CS), Split Tensile Strength (STS), and deflection were discovered at these percentages after 56 days of testing. The concrete cube, cylinder, and beam specimens were examined in the explorations, as mentioned earlier. The results indicate that a 10% substitution of cement with fly ash and a replacement of coarse aggregate with Lytag lightweight aggregate produced concrete that performed well in terms of mechanical properties and deflection. The cementitious composites have varying characteristics as the environment changes. Therefore, understanding their mechanical properties are crucial for safety reasons. CS, STS, and deflection are the essential property of concrete. Machine learning (ML) approaches have been necessary to predict the CS of concrete. The Artificial Fish Swarm Optimization (AFSO), Particle Swarm Optimization (PSO), and Harmony Search (HS) algorithms were investigated for the prediction of outcomes. This work deftly explains the tremendous AFSO technique, which achieves the precise ideal values of the weights in the model to crown the mathematical modeling technique. This has been proved by the minimum, maximum, and sample median, and the first and third quartiles were used as the basis for a boxplot through the standardized method of showing the dataset. It graphically displays the quantitative value distribution of a field. The correlation matrix and confidence interval were represented graphically using the corrupt method.

• International journal of advanced smart convergence
• /
• 제11권1호
• /
• pp.11-18
• /
• 2022

Securities and investment services have and use large data. Investors started to invest through their own analysis methods. There are 22 major securities and investment companies in Korea and only 6 companies support open API. Python is effective for requesting and receiving, analyzing text data from open API. Daishin Securities Co. is the only open API that officially supports Python, and eBest Investment & Securities Co. unofficially supports Python. There are two important differences between CYBOS plus of Daishin Securities Co. and xingAPI of eBest Investment & Securities Co. First, we must log in to CYBOS plus to access the server of Daishin Securities Co. And the python program does not require a logon. However, to receive data using xingAPI, users log on in an individual Python program. Second, CYBOS plus receives data in a Request/Reply method, and zingAPI receives data through events. It can be thought that these points will show a difference in response time. Response time is important to users who use open APIs. Data were measured from August 5, 2021, to February 3, 2022. For each measurement, 15 repeated measurements were taken to obtain 420 measurements. To increase the accuracy of the study, both APIs were measured alternately under same conditions. A paired t-test was performed to test the hypothesis that the null hypothesis is there was no difference in means. The p-value is 0.2961, we do not reject null hypothesis. Therefore, we can see that there is no significant difference between means. From the boxplot, we can see that the distribution of the response time of eBest is more spread out than that of Cybos, and the position of the center is slightly lower. CYBOS plus has no restrictions on Python programming, but xingAPI has some limits because it indirectly supports Python programming. For example, there is a limit to receiving more than one current price.