• 약학회지
• /
• 제36권6호
• /
• pp.538-547
• /
• 1992

Optimal synthetic condition of barium sulfate were investigated from the viewpoint of yield and bulkiness according to a randomized complete block design proposed by G.E.P. Box and K.B. Wilson. Barium chloride and magnesium sulfate were utilized as reactants in order to prepare barium sulfate in this study. It was found that optimum temperature range of reactant solutions was $60{\sim}100^{\circ}C$ and the optimum concentration range of the reactant solutions was $10{\sim}17.3%$ and $10{\sim}20%$ respectively, on the viewpoint of yield and bulkiness. The optimum mole ratio of $BaCI_2$ to $BaSO_4$ was in the range of $1.50{\sim}2.0$ and the optimum mole ratio of $BaCI_2$ to $BaSO_4$ was in the range of $1.50{\sim}2.0$ and the optimum reacting time range was $15{\sim}20$ minutes. The optimum drying temperature range was $110{\sim}130^{\circ}C$ from the viewpoint of yield, but it was $90{\sim}110^{\circ}C$ on the basis of bulkiness. Apparent viscosity of barium sulfate suspensions dispersed in various concentrations of Na. CMC was measured by using Brookfield synchrolectric viscometer model LVT, the relative equation, log ${\eta}_{sp}=A+B.{\phi}$ was examined and the equation was found to agree fairly well. 1 w/v% Na. CMC aqueous solution and 0.1 volume fraction of $BaSO_4$ powder were optimum in the preparation of $BaSO_4$ suspension showing highest viscosity at infinite shearing.

• 약학회지
• /
• 제40권6호
• /
• pp.659-665
• /
• 1996

Zinc white is mainly used as a mild astringent, protectant. and has weak antiseptic action. It is well known that the yield of zinc white produced is greatly affected by the syn thetic conditions such as the reactant concentration, reaction temperature, washing water temperature, mole ratio of reactants, and drying temperature, calcination temperature, etc. The purpose of this study is to investigate the optimal synthesis conditions of zinc white produced. A randomized complete block design suggested by G.E.P. Box and K.B. Wilson was applied for this purpose. Basic zinc carbonate was prepared by reacting zinc sulfate and sod. carbonate solution in this study. Zinc white comes when prepared by calcination of basic zinc carbonate. The optimum synthesis conditions of zinc white obtained from this study is as follows: 1) The reacting temperature range is: 92-100$^{\circ}C$, 2) The concentration of reactant solution is 23.6-27%, 3) The optimum mole-ratio: [ZnSO4]/[Na2CO3] is 1.74~1.96, 4) The washing water temperature is 36$^{\circ}C$, 5) The drying temperature range is 68-74$^{\circ}C$, 6) The calcination temperature is 600$^{\circ}C$. The outcome of DSC indicated a desolvation of basic zinc carbonate occurred at about 133.3$^{\circ}C$. The dehydration of the compound ceased at about 267.9$^{\circ}C$ and the decarboxylation ceased at about 379.9$^{\circ}C$. The physical and chemical properties of zinc white as medicine were studied by use of Volume Test.

• 약학회지
• /
• 제40권1호
• /
• pp.25-35
• /
• 1996

Magaldrate. an antiacid was synthesized by reacting magnesium oxide, aluminum sulfate, and dried aluminum hydroxide gel. The optimum synthesis conditions based on the yield of t he product were established by applying Box-Wilson experimental design. It was found that the optimum synthesis conditions of Magaldrate were as follows: Reaction temperature; 61~$85{\circ}C$, concentration of two reactants. Mgo and $Al(OH)_3$: 16~19.8%, molar concentration ratio of two reactants, [MgO]/[$Al(OH)_3$]; 4.2~5.0, temperature of washing water; 36~$41^{\circ}C$ and drying temperature of the product: 76~$80^{\circ}C$. Magaldrate was synthesized under the optimum synthesis conditions and identified by analyzing the chemical composition, and by differential scanning calorimetry and X-ray diffraction method. The Magaldrate sample synthesis under these conditions was used to prepare 15.6% Magaldrate original suspension which was utilized to make 13% Magaldrate suspension dispered in various concentrations of eight types of suspending agents. The acid-neutralizing capacity of 13% Magaldrate suspension dispersed in 0.25% suspending agents was examined by Rosset-Rice method. The maximum pH was reached within 1 minute in all suspension tested, and duration maintained between pH 3~5 was decreased in the order of Na alginate Na silicate(meta) Veegum HV pectin agar>Na>CMC>xanthan gum>bentonite. It was found that the hysteresis loop area was increased with temperature in the case of Riopan Plus and the addition of agar, whereas the area was decreased with temperature in the case of the addition of Na alginate and xanthan gum. 13% Magaldrate suspension tends to sediment by the addition of bentonite.

• 약학회지
• /
• 제42권2호
• /
• pp.153-158
• /
• 1998

Calcium hydrogen phosphate was synthesized by reacting calcium chloride and sodium hydrogen phosphate solution in this study. It is well known that the particle size and yield o f calcium hydrogen phosphate produced is greatly affected by the synthetic conditions such as the reactant concentration, reaction temperature, reacting fine, mole ratio and drying temperature, etc. The purpose of this study is to investigate the optimum synthesis condition from the viewpoint of yield and sedimentation volume of the prepared calcium hydrogen phosphate powder according to a randomized complete block design proposed by G.E.P. Box and K.B. Wilson. It was found that the optimum synthetic conditions of calcium hydrogen phosphate were as follows: It was found that optirnum temperature range of reactant solutions was $28-38^{\circ}C$ and $32-42^{\circ}C$ respectively, on the viewpoint of yield and sedimentation volume. The optimum concentration range of reactant solutions was 5.5-10.0% and 6.9-7.4% respectively, on the viewpoint of yield and sedimentation volume. The optimum mole ratio of $CaCl_2$ to $Na_2HPO_4$ was in the range of 1.2-2.0 and the optimum reacting time range was 8.5-11.0 minutes. The optimum drying temperature range was $39-41^{\circ}C$ from the viewpoint of yield, but it was $39-43^{\circ}C$ on the basis of sedimentation volume. Crystallographic analysis to X-ray diffraction patterns of commercially available ecalcium hydrogen phosphate and calcium hydrogen phosphate samples prepared in this study suggested that all samples tested belonged to monoclinic crystal system characteristic of $CaHP0_4{\cdot}2H_20$ crystals.

• 약학회지
• /
• 제39권1호
• /
• pp.68-77
• /
• 1995

Aluminum magnesium silicate was synthesized by reacting the mixed solutions of sodium aluminate and magnesium chloride with sodium silicate solution in this study. The optimal synthesis conditions based on the yield of the product has been attained according to Box-Wilson experimental design. It was found that the optimal synthetic conditions of aluminum magnesium silicate were as follows: Reaction temperature=$69~81^{\circ}C$; concentration of two reactants, sodium aluminate and magnesium chloride= 13.95~14.44 w/w%; molar concentration ratio of the two reactants, [NaAlO$_{2}$]/MgCl$_{2}$]=3.63~4.00; reaction time= 12~15 min; drying temp. of the product=$70~76^{\circ}C$. Aluminum magnesium silicate synthesized under the optimal synthesis condition was dispersed in 0.75, 1.0 and 1.5w/w% aqueous solution or suspension of six dispersing agents, and the Theological properties of the dispersed systems prepared have been investigated at $15^{\circ}C$ and $25^{\circ}C$ using Brookfield LVT Type Viscometer. The acid-consuming capacity of the most excellent product was 272~278 ml of 0.1N-HCl per gram of the antacid. The flow types of 5.0 w/w% aluminum magnesium silicate suspension were dependent upon the kind and concentration of dispersing agents added. The apparent viscosity of the suspension was generally increased with concentration of dispersing agents and was not significantly changed or decreased as the temperature was raised. A dispersing agent, hydroxypropyl cellulose suspension, exhibited an unique flow behavior of antithixotropy. The flow behavior of the suspension dispersed in a given dispersing agent not always coincided with that of the dispersing agent solution or suspension itself.

• 한국미생물·생명공학회지
• /
• 제22권5호
• /
• pp.531-537
• /
• 1994

This study was undertaken with objective of optimizing the conditions of fermentation in an aqueous two-phase system which is composed of polyethylene glycol (PEG) 20000 and crude dextran (Dx). The data were obtained and analyzed using the Box-Wilson's experimental design protocol and the response surface methodology. To reach this end a multilinear polynomial regres- sion model was developed, which can be utilized for the purpose of optimizing the extractive fermentation. Optimum conditions for batch fermentation with aqueous two phase system were found to be at 4.2~5.4% PEG/3.2~4.2% Dx range. The composition of the center was 4.8% PEG/ 3.6% Dx. Optimum operating conditions for initial sugar concentration and fermentation time were approximately 160 g/l, and 21~22 hr, respectively. Fermentation in the aqueous two phase system composed of 5% PEG/4% Dx showed increase of 23% in ethanol concentration, of 9.5% in ethanol yield, and of 19% in ethanol productivity as compared to the case of fermentation of neat Jerusalem artichoke juice.

• Earthquakes and Structures
• /
• 제15권1호
• /
• pp.81-95
• /
• 2018

Most buildings feature core walls (and shear walls) that are placed eccentrically within the building to fulfil architectural requirements. Contemporary earthquake design standards require three dimensional (3D) dynamic analysis to be undertaken to analyse the imposed seismic actions on this type of buildings. A static method of analysis is always appealing to design practitioners because results from the analysis can always be evaluated independently by manual calculation techniques for quality control purposes. However, the equivalent static analysis method (also known as the lateral load method) which involves application of an equivalent static load at a certain distance from the center of mass of the buildings can generate results that contradict with results from dynamic analysis. In this paper the Generalised Force Method of analysis has been introduced for multi-storey buildings. Algebraic expressions have been derived to provide estimates for the edge displacement ratio taking into account the effects of dynamic torsional actions. The Generalised Force Method which is based on static principles has been shown to be able to make accurate estimates of torsional actions in seismic conditions. The method is illustrated by examples of two multi-storey buildings. Importantly, the black box syndrome of a 3D dynamic analysis of the building can be circumvented.

• 약학회지
• /
• 제41권5호
• /
• pp.595-601
• /
• 1997

The optimal synthesis condition based on the yield of thiamine mononitrate has been attained according to Box-wilson experimental design. The optimal condition was as follows : Molar concentration ratio of $SB1{\cdot}HCL=0.6839$, quantity of $NH_4NO_3=50.09g$, agitation velocity=51.6rpm, reaction temperature=22.8$^{\circ}C$. The stabilities of three kinds of thiamine monosalts(thiamine monoiodide, -monobromide, -monorhodanate) were investigated in sterile solution, compressed tablet and multivitamin capsule, respectively. Assay data are given to show that thiamine monosalts are not significantly higher than that of thiamine mononitrate in sterile solutions and the addition of an acidic stabilizer is unnecessary. The solutions were clear and free of precipitate and didn't discolored after storage at room temperature and 40$^{\circ}C$ for 6 months. The tablets and capsules were assayed initially and at predetermined intervals during storage at room temperature and 40$^{\circ}C$ for 6 months. Thiamine monorhodanate was found to be more stable than other thiamine monosalts in these compressed tablets containing other vitamin of the B complex and the data indicate that thiamine monosalts was similar to that of thiamine mononitrate in the multivitamine capsules.

• Computers and Concrete
• /
• 제25권4호
• /
• pp.327-341
• /
• 2020

Advanced forms of structural design (e.g., displacement-based methods) require knowledge of the non-linear force-displacement behavior of both the overall building and individual lateral load resisting elements, i.e., walls or building cores. Similarly, understanding the non-linear behaviour of the elements in a structure can also allow for a less conservative structural response to be calculated by better understanding the cracked (i.e., effective) properties of the various RC elements. Calculating the non-linear response of an RC section typically involves using 'black box' analysis packages, wherein the user may not be in complete control nor be aware of all the intricate settings and/or decisions behind the scenes. This paper introduces a user-friendly and transparent analysis program for predicting the back-bone force displacement behavior of slender (i.e., flexure controlled) RC walls, building cores or columns. The program has been validated and benchmarked theoretically against both commonly available and widely used analysis packages and experimentally against a database of 16 large-scale RC wall test specimens. The program, which is called WHAM, is written using Microsoft Excel spreadsheets to promote transparency and allow users to further develop or modify to suit individual requirements. The program is available free-of-charge and is intended to be used as an educational tool for structural designers, researchers or students.

• 한국작물학회지
• /
• 제34권1호
• /
• pp.60-73
• /
• 1989

수도재배에 있어서 수량은 여러 가지 요인이 복합적으로 작용하여 나타난 반응의 산물이다. 수도의 적정재배조건을 구명하기 위하여 지금까지는 제한된 요인 및 수준에서 시험연구가 수행되어 왔는데, 처리요인수 및 각 요인당 처리수준이 증가될 경우 전체 처리수의 급증으로 시험수행이 어렵게 된다. 본 연구는 이를 극복하고자 조생량 벼 품종 '운봉벼'의 재식주수, 주당본수, 질소시비량, 이앙일, 육묘일수 등 5가지 계량적 재배요인의 최적조건을 구명하기 위한 시험을 수행하고 수량을 Box와 Wilson의 중심합성계획법에 따라 분석하였으며(시험 1), 같은 품종을 공시하여 실험 1과 같은 요인을 Finney의 부분실시법(FFD)과 비교함으로써(시험 2) CCD의 농사시험연구에의 활용가능성을 제시하고자 하였다. 1. 재배조건에 따른 수량반응 수량은 5요인중 4요인의 수준을 중심수준에서 통제하였을 때 각 요인별 최대수량은 중심수준(재식주수, 90수/3.3$m^2$ ; 주당본수, 5본 ; N시비량, 11kg/10a ; 이앙일, 6월 25일 ; 육묘일수, 35일) 부근이었고 각 요인이 양극단수준으로 갈수록 감수하였으며 5요인중 3요인을 중심수준에서 통제하고 난 뒤에 2요인들 간의 상호작용에 의한 수량은 가 수준의 중심부에서 최고치를 보였다. 전체 5개 요인의 상호작용에 의해 나타난 수량의 정상점은 안부점이었다. 2. 두 계획법의 비교 가. CCD에서 수량에 대한 각각의 정상점에서의 재배조건은, 재식주수 107주/3.3$m^2$, 주당본수 4본, 질소시비량 10kg/10a, 이앙일 6월 26일, 육묘일수 33일이었고, 정상점에서의 수량은 439kg/10a으로서 FFD에서의 그것들과 비슷하였다. 나. CCD에 의하면 요인수와 수준수가 많아도 처리조합수를 획기적으로 줄일 수 있었고, 실험재료의 절적, 작업시간의 단축 및 작업의 간편화를 가져왔다. 다. CCD(각 요인별 5수준)는 FFD(각 3수준)에 비하여 수준수가 많았지만 결과를 도해화하기에 편리하였다. 라. 양 계획법에 있어서 수량의 정상점이 안부점인 것으로 보아 요인의 설정시 각 요인 상호간의 이질성을 고려해야 하며, 처리요인의 지나친 증가도 억제되어야 할 것이다. 마. CCD는 극한수준($\pm$2, $\pm$2, $\pm$2, $\pm$2, $\pm$2)의 처리가 없기 때문에 각 요인의 극한수준의 실험영역에 대해서는 적은 정보를 얻었으나. FFD보다는 많은 유익한 정보를 획득할 수 있었다. 따라서, CCD는 획기적으로 처리수를 줄였어도 유익한 정보를 제공하는 것으로 보아, 농사시험연구에 효율적으로 활용할 수 있는 계획적으로 확인되었다.적으로 확인되었다.