• Structural Engineering and Mechanics
• /
• 제22권4호
• /
• pp.419-432
• /
• 2006

Experimental studies on the behaviors of box-shape steel reinforced concrete (SRC) composite beams were conducted. Seven 1:3 scale model composite beams were tested to failure. Each of the beams was simply supported at the ends and two concentrated loads were applied at the one-third span and two-thirds span respectively. Experimental results indicate that the flexural strength can be enhanced when the ratio of flexural reinforcements and flange thickness of the shape steel are increased; the shear strength is enhanced with increase of web thickness of the shape steel. Insignificant effects of concrete in the box-shape steel are found on improving the flexural strength and shear strength of the box-shape SRC composite beams, thus concrete inside the box-shape steel can be saved, and the weight of the SRC beams can be decreased. Shear studs can strengthen the connection and co-work effects between the shape steel and the concrete and enhance the shear strength, but stud design for the composite beams should be further improved. Formulas for flexural and shear strength of the composite beams are proposed, and the calculated results are in good agreement with the experimental results. In general, the box-shape SRC composite beam is a kind of ductile member, and suitable for extensive engineering application.

• Structural Engineering and Mechanics
• /
• 제31권2호
• /
• pp.137-152
• /
• 2009

Mechanic behavior of Y-shape thin-walled box girder bridge structure is complex, so one can not exactly hold the mechanical behavior of the Y-shape thin-walled box girder bridge structure through general calculation theory and analytical method. To hold the mechanical behavior better, based on elementary beam theory, by increasing the degree of freedom analytical method, taking account of restrained torsiondistortion angledistortion warp and shearing lag effect at the same time, authors obtain a thin-walled box beam analytical element of 10 degrees of freedom of every node, derive stiffness matrix of the element, and code a finite element procedure. In addition, authors combine the obtained procedure with spatial grillage analytical method, meanwhile, they build a new analytical method that is the spatial thin-walled box girder element grillage analysis method. In order to validate the precision of the obtained analysis method, authors analyze a type Y-shape thin-walled box girder bridge structure according to the elementary beam theory analytical method, the shell theory analytical method and the spatial thin-walled box girder element grillage analysis method respectively. At last, authors test a type Y-shape thin-walled box girder bridge structure. Comparisons of the results of theory analysis with the experimental text show that the spatial thin-walled box girder element grillage analysis method is simple and exact. The research results are helpful for the knowledge of the mechanics property of these Y-shape thin-walled box girder bridge structures.

• Journal of Korea Trade
• /
• 제26권6호
• /
• pp.83-95
• /
• 2022

Purpose - With the recent spread of COVID-19, U.S. consumers' consumption pattern is changing towards purchasing large-capacity products, as they stay at home longer. Thus, the current research investigates the effects of box shape and component diversity for large-sized products on product evaluation in logistic business. Moreover, this research examines that information-processing fluency mediates the moderating effects of box shape and product components on target evaluations to confirm psychological mechanism for generating this effect. Design/methodology - In order to examine the hypotheses, the current research conducts two online experiments. The 184 participants (Study 1), and 205 participants (Study 2) of U.S. nationality were recruited through Amazon Mechanical Turk. This research analyzes the data by using SPSS 25 and PROCESS macro 4.0. Findings - Study 1 demonstrates that when the height of a box is greater than its width, products with single components promote positive target evaluations, while when the width of box is greater than its height, products with a variety of components lead to positive target evaluations. Study 2 shows that the same results are replicated in other product categories and with different box shape ratios. Moreover, Study 2 also finds that the ease of information processing mediates the interaction effects of box shape and component diversity on U.S. consumers' target evaluations. Originality/value - The current research has originality in that it investigates the effect of box shape and product composition diversity on U.S. consumer product evaluation from the perspective of information-processing theory Moreover, this research has practical implications for global traders who prepare for entering the U.S. market.

• 인문언어
• /
• 제1권1호
• /
• pp.159-183
• /
• 2001

This paper surveys the meaning of the pen name ′Yi Sang(李箱)′ in the light of the arbitariness of language and the relationship among names, observing in three ways how the images of ′Sang′ (Box) appear differently in his works. In Particular, we look into (1) the relationship between a box and its inner boxes, (2) the divisional relationship in the box, and (3) the relationship between the box and an outer box. In Yi Sang′s work, image (1) gives shape to the relationship between the writer himself and his ancestors who are responsible for his present existence. Image (2) gives shape to two internally divided Yi Sangs, and is symbolized as a mirror that reflects two selves. Image (3) gives shape to a relationship between himself in the closed world and other people and/or a bigger outside world. All these symbolic relationships are fully represented in his work "Nalgae" (The Wing)". What is interesting is that Yi Sang has already employed these box images in his earlier poetry "Geonchuk-muhan-yukmyeon-gaucho" (Infinite Architectural Hexagon). furthermore, by visualizing his name as a sqaure($\square$), he means to suggest the intentional image of his pen name as a ′box′.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2218-2223
• /
• 2008

A nose shape is strongly related with the aerodynamic performances of train. Therefore shape definition and aerodynamic performance analysis are important for train nose shape design. In this study, a new design method was suggested for train nose shape design by configuration function. To this end, the nose shape was classified by box type and each box shape is defined. After that the 3-D shape of train was defined as several mathematical functions by combination of each box shape. Also it was shown that the wind shield of driver's seat and complex curves of surface can be expressed using superposition of functions. This methodology can be used for grid generation of numerical analysis, and applied to aerodynamic optimization design of nose shape.

• 대한치과보철학회지
• /
• 제36권1호
• /
• pp.133-149
• /
• 1998

Clinical application of composite resin recently draw great concerns in dentistry. Especially due to advantages such as esthetics, adhesiveness, simple clinical procedures, various shapes and kinds of composite resins are widely being applied to prosthodontics, conservative dentistry, and orthodontics. But, clinical problems attributable to the polymerization shrinkage of composite resin have been proposed, and we have to regard clinical problems such as secondary caries, loss of restoration, fracture of the surrounding tooth structure, marginal discoloration, and tooth sensitivity, and many portions are remained to be overcome. Therefore, this study attempts to analyze stress distribution between resin and tooth structure which is generated during polymerization shrinkage of composite resin using three dimensional finite element method. Three dimensional finite element models with conventional box-shape cavity and erosion/abrasion type V-shape lesion cavity in upper central incisor were developed. These cavities were filled with four different types of placement techniques. (bulk filling, horizontal increment filling, oblique occlusal increment filling, oblique gingival increment filling) The stresses generated by polymerization shrinkage of composite resin were calculated. The results analyzed with three dimensional finite element method were as follows : 1. The increment filling technique showed the highest maximum normal stress in both conventional box-shape and V-shape cavities and showed a tendency to decrease after complete polymerization. 2. The bulk filling technique resulted in increased stresses during the curing process in both conventional box-shape and V-shape cavities and the highest maximum normal stress occurred after complete polymerization. 3. The bulk filling resulted in the lowest maximum normal stress in both box-shape and V-shape cavities 4. Regardless of placement method, in conventional box-shape cavity, the maximum normal stress increased in dentin floor, enamel, dentin sequence and in V-shape cavity, the maximum normal stress increased in enamel, dentin sequence.

• International Journal of Advanced Culture Technology
• /
• 제11권3호
• /
• pp.163-171
• /
• 2023

A blind box is a kind of sales method in that you can only get the product information by opening the package. In 2019, blind box products began to grow rapidly in the Chinese market, and gradually formed a special "blind box economy". The particularity of blind box products is that driven by consumers' curiosity, consumers' purchasing behavior can be directly induced by the visual and tactile perception of commodity packaging. Therefore, it is necessary to explore the psychological needs of consumers and master the blind box packaging design elements under the influence of consumer psychology. This paper takes figurine blind box packaging elements as the research scope and Chinese blind box consumers as the research object. Through market research and literature study, We are designed to conduct a questionnaire survey and SPSS empirical study to find out the differences in the preferences of different consumer temperament types for blind box packaging, taking the characteristics of blind box products and consumer psychology as the relevant theoretical background. The research results show that among the blind box consumers, choleric type consumers predominate, the color of the blind box packaging presents red, orange, and yellow preference, and the material presents metal, and plastic preference. The shape of the blind box shows a preference for special shape.

• 헤리티지:역사와 과학
• /
• 제38권
• /
• pp.129-156
• /
• 2005

최근 백제유적에 대한 발굴조사에서는 토광형태 또는 목재나 석재를 이용하여 축조한 지하식의 저장시설이 발견되는 사례가 늘어나고 있다. 본고는 이러한 백제시대 지하저장시설을 형태 및 축조방법별로 복주머니형(플라스크형), 목곽형, 석곽형 시설로 구분하고 각각의 구조와 기능에 대해 검토하는 것을 목적으로 하였다. 복주머니형 저장공은 백제 한성시기~사비시기의 금강 및 한강유역의 많은 유적에서 현재까지 600기 이상 조사된 백제의 가장 대표적인 지하저장시설로 3~7세기대 한강유역과 금강유역의 백제의 독특한 저장문화를 구성하는 유구로서 그 구조나 중국의 예를 통해 볼 때 곡물의 장기저장을 위한 시설이었을 가능성이 있으며, 그 외에도 토기의 저장 등 다양한 물품이 저장되었다고 보인다. 목곽형과 석곽형의 저장시설은 사비시기의 유적에서 주로 확인되고 있어 6세기 이후 복주머니형 저장공의 축조가 줄어들면서 그 기능을 일부 대체했을 것으로 보이며, 특히 그 축조방법이나 구조상 공력이 많이 소모되는 것으로 도성이나 성곽유적에서 공적인 용도로 사용되었던 것으로 추정된다. 목곽형 저장시설은 평면 장방형인 것과 방형인 것, 축조방식에 따라 가구식(架構式)과 주혈식(柱穴式)으로 구분할 수 있으며, 이는 축조하고자 하는 지점의 지형이나 지질에 의해 결정되었을 가능성이 있다. 이러한 목곽형 저장시설은 관북리유적과 월평동유적의 예를 통해 볼 때 과일과 같은 식품류의 저장과 군사주둔지에서의 중요물품 저장 등 필요에 따라 다양한 품목의 물건이 저장된 것으로 보인다. 지하 저장시설의 기능적 특성상 식품류의 장기저장과 일본의 예를 통해 볼 때 화재시 중요물품의 안전한 보관과 관련하여 목곽이나 석곽의 저장시설이 채용되었을 가능성이 있다.

• Wind and Structures
• /
• 제35권5호
• /
• pp.337-351
• /
• 2022

As central-slotted box decks usually have excellent flutter performance, studies on this type of deck mostly focus on the vortex-induced vibration (VIV) control. Yet with the increasing span lengths, cable-supported bridges may have critical wind speeds of wind-induced static instability lower than that of the flutter. This is especially likely for bridges with a central-slotted box deck. As a result, the overall aerodynamic performance of such a bridge will depend on its wind-induced static stability. Taking a 1400 m-main-span cable-stayed bridge as an example, this study investigates the influence of a series of deck shape parameters on both static and flutter instabilities. Some crucial shape parameters, like the height ratio of wind fairing and the angle of the inner-lower web, show opposite influences on the two kinds of instabilities. The aerodynamic shape optimization conducted for both static and flutter instabilities on the deck based on parameter-sensitivity studies raises the static critical wind speed by about 10%, and the overall critical wind speed by about 8%. Effective VIV countermeasures for this type of bridge deck have also been proposed.

• 한국소음진동공학회논문집
• /
• 제24권7호
• /
• pp.525-536
• /
• 2014

In this paper, GUI program for microspeaker system simulation program was developed and verified through closed box, vent box and 6th order bandpass enclosure system. By using the pseudo loudspeaker model concept, TS parameters and rear volume of microspeaker were identified. Their suitabilities were proved by comparing test results with simulations of electrical impedance and sound pressure response curves for the three box types; closed box, vent box and 6th order bandpass box. Also, MSSP was found to be effective regardless of the microspeaker's shape, either circular or rectangular shape. MSSP can be used for the microspeaker system simulation, and can give a general prediction of such as; sound pressure level curve, electrical impedance, diaphragm velocity and displacement curve according to multiple design parameters; diaphragm mass, compliance, force factor, front and rear volume, front and rear port's diameter and length.