• Structural Engineering and Mechanics
• /
• 제22권4호
• /
• pp.419-432
• /
• 2006

Experimental studies on the behaviors of box-shape steel reinforced concrete (SRC) composite beams were conducted. Seven 1:3 scale model composite beams were tested to failure. Each of the beams was simply supported at the ends and two concentrated loads were applied at the one-third span and two-thirds span respectively. Experimental results indicate that the flexural strength can be enhanced when the ratio of flexural reinforcements and flange thickness of the shape steel are increased; the shear strength is enhanced with increase of web thickness of the shape steel. Insignificant effects of concrete in the box-shape steel are found on improving the flexural strength and shear strength of the box-shape SRC composite beams, thus concrete inside the box-shape steel can be saved, and the weight of the SRC beams can be decreased. Shear studs can strengthen the connection and co-work effects between the shape steel and the concrete and enhance the shear strength, but stud design for the composite beams should be further improved. Formulas for flexural and shear strength of the composite beams are proposed, and the calculated results are in good agreement with the experimental results. In general, the box-shape SRC composite beam is a kind of ductile member, and suitable for extensive engineering application.

• Structural Engineering and Mechanics
• /
• 제31권2호
• /
• pp.137-152
• /
• 2009

Mechanic behavior of Y-shape thin-walled box girder bridge structure is complex, so one can not exactly hold the mechanical behavior of the Y-shape thin-walled box girder bridge structure through general calculation theory and analytical method. To hold the mechanical behavior better, based on elementary beam theory, by increasing the degree of freedom analytical method, taking account of restrained torsiondistortion angledistortion warp and shearing lag effect at the same time, authors obtain a thin-walled box beam analytical element of 10 degrees of freedom of every node, derive stiffness matrix of the element, and code a finite element procedure. In addition, authors combine the obtained procedure with spatial grillage analytical method, meanwhile, they build a new analytical method that is the spatial thin-walled box girder element grillage analysis method. In order to validate the precision of the obtained analysis method, authors analyze a type Y-shape thin-walled box girder bridge structure according to the elementary beam theory analytical method, the shell theory analytical method and the spatial thin-walled box girder element grillage analysis method respectively. At last, authors test a type Y-shape thin-walled box girder bridge structure. Comparisons of the results of theory analysis with the experimental text show that the spatial thin-walled box girder element grillage analysis method is simple and exact. The research results are helpful for the knowledge of the mechanics property of these Y-shape thin-walled box girder bridge structures.

• Journal of Korea Trade
• /
• 제26권6호
• /
• pp.83-95
• /
• 2022

Purpose - With the recent spread of COVID-19, U.S. consumers' consumption pattern is changing towards purchasing large-capacity products, as they stay at home longer. Thus, the current research investigates the effects of box shape and component diversity for large-sized products on product evaluation in logistic business. Moreover, this research examines that information-processing fluency mediates the moderating effects of box shape and product components on target evaluations to confirm psychological mechanism for generating this effect. Design/methodology - In order to examine the hypotheses, the current research conducts two online experiments. The 184 participants (Study 1), and 205 participants (Study 2) of U.S. nationality were recruited through Amazon Mechanical Turk. This research analyzes the data by using SPSS 25 and PROCESS macro 4.0. Findings - Study 1 demonstrates that when the height of a box is greater than its width, products with single components promote positive target evaluations, while when the width of box is greater than its height, products with a variety of components lead to positive target evaluations. Study 2 shows that the same results are replicated in other product categories and with different box shape ratios. Moreover, Study 2 also finds that the ease of information processing mediates the interaction effects of box shape and component diversity on U.S. consumers' target evaluations. Originality/value - The current research has originality in that it investigates the effect of box shape and product composition diversity on U.S. consumer product evaluation from the perspective of information-processing theory Moreover, this research has practical implications for global traders who prepare for entering the U.S. market.

• Lingua Humanitatis
• /
• 제1권1호
• /
• pp.159-183
• /
• 2001

This paper surveys the meaning of the pen name ′Yi Sang(李箱)′ in the light of the arbitariness of language and the relationship among names, observing in three ways how the images of ′Sang′ (Box) appear differently in his works. In Particular, we look into (1) the relationship between a box and its inner boxes, (2) the divisional relationship in the box, and (3) the relationship between the box and an outer box. In Yi Sang′s work, image (1) gives shape to the relationship between the writer himself and his ancestors who are responsible for his present existence. Image (2) gives shape to two internally divided Yi Sangs, and is symbolized as a mirror that reflects two selves. Image (3) gives shape to a relationship between himself in the closed world and other people and/or a bigger outside world. All these symbolic relationships are fully represented in his work "Nalgae" (The Wing)". What is interesting is that Yi Sang has already employed these box images in his earlier poetry "Geonchuk-muhan-yukmyeon-gaucho" (Infinite Architectural Hexagon). furthermore, by visualizing his name as a sqaure($\square$), he means to suggest the intentional image of his pen name as a ′box′.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2218-2223
• /
• 2008

A nose shape is strongly related with the aerodynamic performances of train. Therefore shape definition and aerodynamic performance analysis are important for train nose shape design. In this study, a new design method was suggested for train nose shape design by configuration function. To this end, the nose shape was classified by box type and each box shape is defined. After that the 3-D shape of train was defined as several mathematical functions by combination of each box shape. Also it was shown that the wind shield of driver's seat and complex curves of surface can be expressed using superposition of functions. This methodology can be used for grid generation of numerical analysis, and applied to aerodynamic optimization design of nose shape.

• The Journal of Korean Academy of Prosthodontics
• /
• 제36권1호
• /
• pp.133-149
• /
• 1998

Clinical application of composite resin recently draw great concerns in dentistry. Especially due to advantages such as esthetics, adhesiveness, simple clinical procedures, various shapes and kinds of composite resins are widely being applied to prosthodontics, conservative dentistry, and orthodontics. But, clinical problems attributable to the polymerization shrinkage of composite resin have been proposed, and we have to regard clinical problems such as secondary caries, loss of restoration, fracture of the surrounding tooth structure, marginal discoloration, and tooth sensitivity, and many portions are remained to be overcome. Therefore, this study attempts to analyze stress distribution between resin and tooth structure which is generated during polymerization shrinkage of composite resin using three dimensional finite element method. Three dimensional finite element models with conventional box-shape cavity and erosion/abrasion type V-shape lesion cavity in upper central incisor were developed. These cavities were filled with four different types of placement techniques. (bulk filling, horizontal increment filling, oblique occlusal increment filling, oblique gingival increment filling) The stresses generated by polymerization shrinkage of composite resin were calculated. The results analyzed with three dimensional finite element method were as follows : 1. The increment filling technique showed the highest maximum normal stress in both conventional box-shape and V-shape cavities and showed a tendency to decrease after complete polymerization. 2. The bulk filling technique resulted in increased stresses during the curing process in both conventional box-shape and V-shape cavities and the highest maximum normal stress occurred after complete polymerization. 3. The bulk filling resulted in the lowest maximum normal stress in both box-shape and V-shape cavities 4. Regardless of placement method, in conventional box-shape cavity, the maximum normal stress increased in dentin floor, enamel, dentin sequence and in V-shape cavity, the maximum normal stress increased in enamel, dentin sequence.

• International Journal of Advanced Culture Technology
• /
• 제11권3호
• /
• pp.163-171
• /
• 2023

A blind box is a kind of sales method in that you can only get the product information by opening the package. In 2019, blind box products began to grow rapidly in the Chinese market, and gradually formed a special "blind box economy". The particularity of blind box products is that driven by consumers' curiosity, consumers' purchasing behavior can be directly induced by the visual and tactile perception of commodity packaging. Therefore, it is necessary to explore the psychological needs of consumers and master the blind box packaging design elements under the influence of consumer psychology. This paper takes figurine blind box packaging elements as the research scope and Chinese blind box consumers as the research object. Through market research and literature study, We are designed to conduct a questionnaire survey and SPSS empirical study to find out the differences in the preferences of different consumer temperament types for blind box packaging, taking the characteristics of blind box products and consumer psychology as the relevant theoretical background. The research results show that among the blind box consumers, choleric type consumers predominate, the color of the blind box packaging presents red, orange, and yellow preference, and the material presents metal, and plastic preference. The shape of the blind box shows a preference for special shape.

• Korean Journal of Heritage: History & Science
• /
• 제38권
• /
• pp.129-156
• /
• 2005

Increasing discovery cases of underground storage facilities made of earth, wood, or stone are being reported from the recent excavation survey of the Baekje relics. Accordingly, the purpose of this study is to examine the structure and function of the underground storage facilities of Baekje following a classification made by the type and building method as follows: plask shape, wooden box shape, and stone box shape. The plask shape storage is the most representative underground storage of Baekje that has been found in numerous relics more than 600 sets around Hangang(Han River) and Geumgang(Geum River) from the Hansung period to Sabi period in Baekje Dynasty. It is a historical artefact as a part of the unique storage culture of Baekje around Hangang and Geumgang from the 3rd to 7th Century. Considering its structure and the example of Chinese one, it might had been used for a long-term storage of grains and various other items including earth wares. The storage facility in wooden box shape and stone box shape are found mostly in the relics Of Sabi period. Thus it might had taken some functions of the storage in traditional pouch shape which had decreased after the 6th Century. In particular, the wooden box shape and stone box shape storage required enormous labor force to build owing to their structure and building method. Thus, they were considered to had been used for official purposes in province fortress and citadel artefact. The wooden box shape storage facility is classified into flat rectangular type and square type based on the structure, and into Gagu type(架構式) and Juheol type(柱穴式) based on the building method. It might had been decided according to the geography and geological feature of the place where the storage was to be built. Considering the examples of Gwanbuk-ri relics and Weolpyong-dong relics, the wooden box shape storage facility might had been used for various items depending on the needs, including foods such as fruits and essential provisions at the military base. Considering the long-term food storage, the examples in Japan, and the functional characteristics of the underground storage facility, there is a possibility that the wooden and stone box shape storage facilities had been built so as to safely store important items in case of fire. This study is only a rudimentary examination for the storage facility in Baekje. Thus further studies are to be made specifically and comprehensively on the comparison with other regions, distribution pattern, discovered relics and artefacts, and functions.

• Wind and Structures
• /
• 제35권5호
• /
• pp.337-351
• /
• 2022

As central-slotted box decks usually have excellent flutter performance, studies on this type of deck mostly focus on the vortex-induced vibration (VIV) control. Yet with the increasing span lengths, cable-supported bridges may have critical wind speeds of wind-induced static instability lower than that of the flutter. This is especially likely for bridges with a central-slotted box deck. As a result, the overall aerodynamic performance of such a bridge will depend on its wind-induced static stability. Taking a 1400 m-main-span cable-stayed bridge as an example, this study investigates the influence of a series of deck shape parameters on both static and flutter instabilities. Some crucial shape parameters, like the height ratio of wind fairing and the angle of the inner-lower web, show opposite influences on the two kinds of instabilities. The aerodynamic shape optimization conducted for both static and flutter instabilities on the deck based on parameter-sensitivity studies raises the static critical wind speed by about 10%, and the overall critical wind speed by about 8%. Effective VIV countermeasures for this type of bridge deck have also been proposed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• 제24권7호
• /
• pp.525-536
• /
• 2014

In this paper, GUI program for microspeaker system simulation program was developed and verified through closed box, vent box and 6th order bandpass enclosure system. By using the pseudo loudspeaker model concept, TS parameters and rear volume of microspeaker were identified. Their suitabilities were proved by comparing test results with simulations of electrical impedance and sound pressure response curves for the three box types; closed box, vent box and 6th order bandpass box. Also, MSSP was found to be effective regardless of the microspeaker's shape, either circular or rectangular shape. MSSP can be used for the microspeaker system simulation, and can give a general prediction of such as; sound pressure level curve, electrical impedance, diaphragm velocity and displacement curve according to multiple design parameters; diaphragm mass, compliance, force factor, front and rear volume, front and rear port's diameter and length.