• 대한지역사회작업치료학회지
• /
• 제3권2호
• /
• pp.13-23
• /
• 2013

목적 : 본 연구는 뇌졸중 환자를 대상으로 착시현상이 반영된 과제지향적 거울치료 중재 적용 시 상지기능의 변화를 알아보고자 한다. 연구방법 : 뇌졸중 진단을 받은 6명의 환자들을 대상으로 과제지향적 거울치료 중재를 실시하였다. 과제 지향적 거울치료 시 착시현상을 반영한 운동프로그램을 적용한 그룹과 착시현상을 반영하지 않는 운동프로그램을 적용한 그룹 각각 3명으로 나누어 실시하였다. 상지기능의 변화를 확인하기 위해서 상자와 나무토막 검사와 수직선 그리기 검사를 매회기 반복 측정 하였다. 결과 : 과제지향적 거울치료를 적용한 결과 모든 대상자는 중재기에서 마비측 상지기능이 향상되었으며, 기초선 회귀에서 그 효과가 지속됨을 확인할 수 있었다. 착시현상이 반영된 운동프로그램을 적용받은 그룹이 중재기에서 더욱 상향된 경향선을 보였고, 기초선 회귀에서 더 높은 상지기능이 지속되었다. 결론 : 과제 지향적 거울치료 운동프로그램은 뇌졸중 환자에게 유용하게 적용될 수 있을 것으로 사료되며 과제 지향적 운동프로그램 구성 시 착시현상을 일으키는 편측 움직임을 포함하는 과제를 활용하여 좀 더 효과적인 운동프로그램을 구성할 수 있을 것이다.

• 대한치과보철학회지
• /
• 제17권1호
• /
• pp.23-34
• /
• 1979

In this study, the adhesive strength of three commercial polycarboxylate cements to ten types of dental casting alloys, such as gold, palladium, silver, indium, copper, nickel, chromium, and human enamel and dentine were measured and compared with that of a conventional zinc phosphate cement. The $8.0mm{\times}3.0mm$ cylindrical alloy specimens were made by casting. The enamel specimens were prepared from the labial surface of human upper incisor, and the dentine specimens were prepared from the occulusal surface of the human molar respectively. Sound extracted human teeth, which had been kept in a fresh condition since, extraction, were mounted in a wax box with a cold-curing acrylic resin to expose the flattened area. The mounted teeth were then placed in a Specimen Cutter (Technicut) and were cut down under a water spray, and then the flat area on the all specimens were ground by hand with 400 and 600 grit wet silicone carbide paper. Two such specimens were then cemented together face-to-face with freshly mixed cement, and moderate finger pressure was applied to squeeze the cement to a thin and uniform film. All cemented specimens were then kept in a thermostatic humidor cabinet regulated at $23{\pm}2^{\circ}C.$ and more than 95 per cent relative humidity and tested after 24 hours and 1 week. Link chain was attached to each alloy specimen to reduce the rigidity of the jig assembly, and then all the specimens were mounted in the grips of the Instron Universal Testing Machine, and a tensile load was delivered to the adhering surface at a cross head speed of 0.20 mm/min. The loads to which the specimens were subjected were recorded on a chart moving at 0.50 mm/min. The adhesive strength was determined by measuring the load when the specimen separated from the cement block and by dividing the load by the area. The test was performed in a room at $23{\pm}2^{\circ}C.$ and $50{\pm}10$ per cent relative humidity. A minimum of five specimens were tested each material and those which deviated more than 15 per cent from the mean were discarded and new specimens prepared. From the experiments, the following results were obtained. 1) It was found that the adhesive strength of the polycarboxylate cement to all alloys tested was considerably greater than that of the zinc phosphate cement. 2) The adhesive strength of the polycarboxylate cements was superior to the non precious alloys, such as the copper, indium, nickel and chromium alloys, but it was inferior to the precious gold, silver and palladium alloys. 3) Surface treatment of the alloy was found to be an important factor in achieving adhesion. It appears that a polycarboxylate cement will adhere better to a smooth surface than to a rough one. This contrasts with zinc phosphate cements, where a rough helps mechanical interlocking. 4) The adhesion of the polycarboxylate cement with enamel was found superior to its adhesion with dentine.