• 한국해양공학회지
• /
• 제14권2호
• /
• pp.121-127
• /
• 2000

In this paper a new technique of inverse fairing problem for ship hull is proposed. Recently Lu solved the inverse fairing problem for automobile's body that was made by one surface element. In this system however hull surface is constructed by Gregory's composite surface interpolation method. So reflection line at boundary position is used as a tool of solving inverse problem in surface fairing. But the results are not good. The new concepts of Normal vector line and Constrained reflection line are introduced as an alternative tool. Energy minimization method for Normal Vector Line curve net and the inverse method for Constrained Reflection Line by using optimization technique are examined And the final lines from this proposed surface fairing method shows good fairness.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.1023-1033
• /
• 2012

An underwater planar covering problem is studied where the coverage region consists of polygonal cells, and line sweep motion is used for coverage. In many subsea applications, sidescan sonar has become a common tool, and the sidescan sonar data is meaningful only when the sonar is moving in a straight line. This work studies the optimal line sweep coverage where the sweep paths of the cells consist of straight lines and no turn is allowed inside the cell. An optimal line sweep coverage solution is presented when the line sweep path is parallel to an edge of the cell boundary. The total time to complete the coverage task is minimized. A unique contribution of this work is that the optimal sequence of cell visits is computed in addition to the optimal line sweep paths and the optimal cell decomposition.

• 전기학회논문지P
• /
• 제55권3호
• /
• pp.141-145
• /
• 2006

The line current problem(2-dimensional space : point source) is not easy to analyze the magnetic field using the standard finite element method(FEM), such as overhead trolley line or transmission line. To supplement such a defect this paper is proposed the coupling scheme of analytical solution and FEM. In analysis of the magnetic field using the standard FEM. If the current region is a relatively small compared to the whole region. Therefore the current region must be finely divided using a large number of elements. And the large number of elements increase the number of unknown variables and the use of computer memories. In this paper, an analytical solution is suggested to supplement this weak points. When source is line current and the part of interest is far from line current, the analytical solution can be coupling with FEM at the boundary. Analytical solution can be described by the multiplication of two functions. One is power function of radius, the other is a trigonometric function of angle in the cylindrical coordinate system. There are integral constants of two types which can be established by fourier series expansion. Also fourier series is represented as the factor to apply the continuity of the magnetic vector potential and magnetic field intensity with tangential component at the boundary. To verify the proposed algorithm, we chose simplified model existing magnetic material in FE region. The results are compared with standard FE solution. And it is good agreed by increasing harmonic order.

• 대한원격탐사학회지
• /
• 제19권2호
• /
• pp.159-169
• /
• 2003

본 논문에서는 고해상도의 항공 영상으로부터 건물의 3차원 정보를 자동으로 생성하는 방법을 제안하였다. 먼저 에지 보존 필터를 사용하여 영상에 포함된 잡음을 제거한 후에 watershed 기법을 이용하여 에지의 위치를 보존하고 영상 분할을 수행한다. 분할된 영역의 경계선에 위치한 화소의 곡률을 계산하여 control point를 검출하고 control point 사이의 선소를 추출한다. 추출된 선소들의 방향과 길이를 고려하여 선소의 연결을 수행하고 최종적으로 화소의 그레디언트 크기를 이용하여 선소의 위치를 조정한다. 공면의 그룹화와 다각형 조각을 형성하는 과정은 각 영역에 대해 공선 기하학과 비행 정보를 이용하여 정합된 3차원 선소들을 선택하여 이루어진다. 항공 영상에 제안한 방법을 적용하여 건물 지붕을 정확하게 검출할 수 있음을 보였다.

• 말소리와 음성과학
• /
• 제6권4호
• /
• pp.3-15
• /
• 2014

An articulatory study (using an Electromagnetic Articulography, EMA) was conducted to explore effects of prosodic boundary strength (Intonational Phrase/IP versus Word/Wd), and focus (Focused/accented, Neutral, Unfocused/unaccented) on the kinematic realization of /m/ in the coda (${\ldots}$am#i${\ldots}$) and the onset (${\ldots}$a#mi${\ldots}$) conditions in Korean. (Here # refers to a prosodic boundary such as an IP or a Wd boundary). Several important points have emerged. First, the boundary effect on /m/s was most robustly observed in the temporal dimension in both the coda (IP-final) and the onset (IP-initial) conditions, generally in line with cross-linguistically observable boundary-related lengthening patterns. Crucially, however, in contrast with boundary-related slowing-down effects that have been observed in English, both the IP-final and IP-initial temporal expansions of Korean /m/s were not accompanied by an articulatory slowing down. They were, if anything, associated with a faster movement in the lip opening (release) phase (into the vowel). This suggests that the mechanisms underlying boundary-related temporal expansions may differ between languages. Second, observed boundary-induced strengthening effects (both spatial and temporal expansions, especially on the IP-initial /m/s) were remarkably similar to prominence (focus)-induced strengthening effects, which is again counter to phrase-initial strengthening patterns observed in English in which boundary effects are dissociated from prominent effects. This suggests that initial syllables in Korean may be a common focus for both boundary and prominence marking. These results, taken together, imply that the boundary-induced strengthening in Korean is different in nature from that in English, each being modulated by the individual language's prosodic system. Third, the coda and the onset /m/s were found to be produced in a subtly but significantly different way even in a Wd boundary condition, a potentially neutralizing (resyllabification) context. This suggests that although the coda may be phonologically 'resyllabified' into the following syllable in a phrase-medial position, its underlying syllable affiliation is kinematically distinguished from the onset.

• 방송공학회논문지
• /
• 제13권2호
• /
• pp.236-244
• /
• 2008

본 논문에서는 칼라 세그멘테이션, 에지 정합, 지각적 그룹핑 등을 사용하여 Lidar 데이터와 광학 영상의 정보 융합에 의한 새로운 구조물 검출 및 복원 알고리듬을 제안한다. 제안하는 알고리듬은 두 가지 단계로 구성된다. 첫 번째로, 항공 Lidar 데이터로부터 초기 구조물 추출 결과와 영상의 칼라 세그멘테이션 결과를 사용하여 coarse building boundary를 추출한다. 두 번째로, coarse building boundary와 에지 정합 및 지각적 그룹핑에 의해 보다 정밀한 구조물 추출 결과인 precise building boundary를 추출한다. 본 논문에서 제안하는 알고리듬은 보다 신뢰성 있는 구조물 검출을 위해, 광학 영상으로부터 칼라 정보를 사용한다. 이를 통해, Lidar에 의해 획득된 붕괴된 형태의 구조물 외곽선을 보완한다. 또한, 인공지물의 특징으로서, 에지의 직선성 및 다면체 형태의 지붕모양을 반영함으로써 신뢰성 있는 구조물을 검출한다. 다중 센서 데이터에 대한 실험은 제안하는 알고리듬이 Lidar 단일 센서 결과에 비해 정밀하고 신뢰성 있는 결과를 보여준다.

• 한국전자통신학회논문지
• /
• 제14권4호
• /
• pp.663-670
• /
• 2019

지하철에서 스크린 도어와 플랫폼간의 경계선을 검출할 수 있는 변형된 케니에지 검출 알고리듬을 제안한다. 일반적으로 지하철에서는 플랫폼과 스크린 도어 사이의 경계선은 주변에 비해 어둡게 나타나므로 이의 특성을 고려하여 변형된 bottom-hat 변환을 이용해 에지 영상을 만든다. 이렇게 구한 에지 영상에 이중 문턱화를 통해 강한 에지와 약한 에지를 포함하는 이중 문턱화 영상을 얻는다. 이중 문턱화 영상에 호프 변환을 적용하여 플랫폼과 스크린 도어 간의 경계선을 검출하여 그 길이를 계산하고, 사람 등 물체가 있을 때와 없을 때와의 경계선 길이를 비교함으로써, 경계선을 침범 여부를 판단하는 알고리듬을 제안한다. 본 논문에서는 카메라 높이 위치에 따라 두 종류의 서로 다른 입력영상을 사용하여 제안한 변형된 케니에지 검출 알고리듬에 대한 결과를 컴퓨터 시뮬레이션으로 나타내었다.

• International Journal of Advanced Culture Technology
• /
• 제6권4호
• /
• pp.317-322
• /
• 2018

We use edge detection technique for the input image to extract the entire edges of the object in the image and then select only the edges that construct the outline of the object. By examining the positional relation between these pixels composing the outline, a simplified version of the outline of the object in the input image is generated by removing unnecessary pixels while maintaining the condition of connection of the outline. For each pixel constituting the outline, its direction is calculated by examining the positional relation with the next pixel. Then, we group the consecutive pixels with same direction into one and then change them to a line segment instead of a point. Among those line segments composing the outline of the object, a line segment whose length is smaller than a predefined minimum length of acceptable line segment is removed by merging it into one of the adjacent line segments. As a result, an outline composed of line segments of over a certain length is obtained through this process.

• 한국강구조학회 논문집
• /
• 제9권1호통권30호
• /
• pp.37-49
• /
• 1997

The buckling behavior of the web of steel girders are largely dependent on the size and the location of stiffeners and the restraining effect of top and bottom flanges. Elastic and inelastic buckling analyses based or the Spline Finite Strip Method were executed to study the stiffening effect of the longitudinal stiffener on the web of box girders and to find how the top and bottom flanges had effects on the web, where geometric boundary conditions were limited by both hinged, both fixed and the flange sections. The basic assumption for the longitudinal end boundary conditions was that the vertical stiffeners had the rigidity enough to force nil deflection line on the web panel so that the junction line between web and vertical stiffener was assumed to be hinged boundary conditions. The provisions on the longitudinal stiffener of the plate and box girders of the Korean Standard Highway Bridge Specifications(1995) and AASHTO Specifications(1994 LRFD) were compared with the results obtained numerically for the various longitudinal stiffener size of box girders. Simple equations and design curves for the longitudinal stiffener of the web were proposed for the practical use.

• 제어로봇시스템학회논문지
• /
• 제12권2호
• /
• pp.113-118
• /
• 2006

A new last design approach based on the Limb line FFD (LFFD) and Scale factor FFD (SFFD) is presented in this paper. The proposed last design method utilizes the dynamic trimmed parametric patches for the measured foot 3D data and last 3D data. Furthermore, the proposed last data generation system utilizes cross sectional data extracted obtained from the measured 3D foot data. First, the last design rule of the LFFD is constructed on the FFD lattice based on foot last shape analysis. Secondly, SFFD is constructed on the LFFD new lattice based on scale factor deformation. The scale factor is constructed on the boundary edges of polygonized patch and the cross section last data boundary edge of the polygon object. Suppose the two boundary curves have been preprocessed so that they run in the same direction and they forms the SF(Scale Factor). In addition, the control points of FFD lattice are derived with cross. sectional data interpolation methods from a finite set of 3D foot data.