• 전산구조공학
• /
• 제3권4호
• /
• pp.133-141
• /
• 1990

본 연구는 모형건물의 풍동실험을 통하여 건물내부에 작용하는 풍하중의 동적변화를 조사연구하였다. 실험에 사용된 모형건물은 건물외부에 작용하는 풍하중이 건물내부에 전달될 수 있는 개구부가 설치된 직육면체 형태의 구조물인데 실험시 개구부의 면적과 방향을 변화하고 정상류와 난류 상태의 풍하중을 사용하였다. 주어진 실험 조건하에서 건물내부 압력의 진동주파수를 알 수 있는 power spectrum과 내부압력의 동적변화량을 알 수 있는 RMS를 측정하여 분석하였는데 분석된 실험결과는 비교적 최근에 제안된 이론과 일치하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.101-104
• /
• 2006

This study aims at verifying characteristics of torsional fluctuating moment coefficient and power spectral density, which is needed to estimate torsional response of tall buildings. In order to estimate characteristics, the wind tunnel tests have been conducted on 52 types aero-elastic model of the rectangular prisms with various aspects ratios, side ratios and surface roughness in turbulent boundary layer flows. In this paper, characteristics of torsional fluctuating wind force are briefly discussed and then these results were mainly analyzed as a function of the aspects ratios and side ratios of buildings.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.371-372
• /
• 2006

This study was carried out to analyze the effect of wind load on the structural stability of a container crane according to the change of the boom shape using wind tunnel test and provide a container crane designer with data which can be used in a wind resistance design of a container crane assuming that a wind load 75m/s wind velocity is applied in a container crane. Data acquisition conditions for this experiment were established in accordance with the similarity. The scale of a container crane dimension, wind velocity and time were chosen as 1/200, 1/13.3 and 1/15. And this experiment was implemented in an Eiffel type atmospheric boundary layer wind tunnel with $11.52m^2$ cross-section area. Each directional drag and overturning moment coefficients of a container crane according to the change of the boom shape were investigated.

• 한국해양공학회지
• /
• 제4권2호
• /
• pp.172-172
• /
• 1990

• Wind and Structures
• /
• 제25권3호
• /
• pp.233-259
• /
• 2017

Investigations on simulated near-surface atmospheric boundary layer (ABL) in an open-jet facility are carried out by conducting experimental tests on small-scale models of low-rise buildings. The objectives of the current study are: (1) to determine the optimal location of test buildings from the exit of the open-jet facility, and (2) to investigate the scale effect on the aerodynamic pressure characteristics. Based on the results, the newly built open-jet facility is well capable of producing mean wind speed and turbulence profiles representing open-terrain conditions. The results show that the proximity of the test model to the open-jet governs the length of the separation bubble as well as the peak roof pressures. However, test models placed at a horizontal distance of 2.5H (H is height of the wind field) from the exit of the open-jet, with a width that is half the width of the wind field and a length of 1H, have consistent mean and peak pressure coefficients when compared with available results from wind tunnel testing. In addition, testing models with as large as 16% blockage ratio is feasible within the open-jet facility. This reveals the importance of open-jet facilities as a robust tool to alleviate the scale restrictions involved in physical investigations of flow pattern around civil engineering structures. The results and findings of this study are useful for putting forward recommendations and guidelines for testing protocols at open-jet facilities, eventually helping the progress of enhanced standard provisions on the design of low-rise buildings for wind.

• 한국항공우주학회지
• /
• 제45권3호
• /
• pp.212-216
• /
• 2017

두께비 18% 익형(KARI-11-180)에 대한 공력특성 분석이 전산해석기법을 활용해 수행되었다. 익형주위의 격자는 벽면에서 수직으로 투영하여 경계층 격자를 형성하였고 익형 후방에는 정밀한 후류 예측을 위해 조밀한 격자를 위치하였다. 원방경계까지의 거리는 익형 코드의 100배로 정하였고 익형시험결과와의 비교를 위해 자유류 속도, 익형 코드 및 Reynolds수를 풍동시험과 동일하게 정하였다. 또한 난류 모델은 천이지점 예측이 우수한 transition SST 및 DES 모델을 사용하였다. 3차원 전산해석은 세장비가 2와 5인 익형모델에 대해 수행되었는데 양력은 풍동시험결과보다 높은 값을 항력은 낮은 값을 예측하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.745-750
• /
• 2007

This paper presents investigation of topographic effects over isolated 3-dimensional hills through wind tunnel experiments in a boundary layer wind tunnel. Topographic models having five different slopes of $5.71^{\circ},\;11.31^{\circ},\;16.70^{\circ},\;21.80^{\circ}$, and $26.57^{\circ}$, which were based on KBC(2005), were taken into account in the study. The maximum topographic factor and the range of topographic effect from the experiment were compared with those from worldwide major codes and standards, such as ASCE-7-02, AS/NZS-1170.2:2002, ISO4354(1997), and KBC(2005). From the comparison of major codes and standards, in the vertical region of topographic effect, the gentler the slope was. the more different the topographic factors and ranges of topographic effect were, but the steeper the slope was, the more similar they were. It was found from the experimental study that the region of topographic effect in the slope in the across wind direction was greater than the regions of major codes and standard. Also, the gentler the slope was. the larger the topographic factor from the experiment was than the factors of major codes and standards.

• 한국공간구조학회논문집
• /
• 제6권1호
• /
• pp.91-99
• /
• 2006

이 논문은 풍동실험 결과를 토대로 고층아파트 건축물의 풍압분포에 대한 내용을 다루고 있다. 태풍에 의해 창유리 파손을 입은 아파트 단지의 풍압모형을 제작하여 각 건축물의 상호간섭효과를 조사하였다. 풍동실험은 풍압모형을 이용하여 대형경계 층풍동에서 수행하였다. 간섭하는 주변건물의 여부에 따른 실험결과를 비교하고 검토하였다. 주변건물이 없어서 바람을 직접 맞을 때에는 105동, 106동은 주로 정압이 작용하였지만, 주변건물이 둘러싸고 있을 때의 105동, 106동은 큰 부압이 작용하는 것을 관찰할 수 있었다. 따라서 고층아파트 외장재 설계시 외장재의 안전성 확보를 위해서는 풍동실험을 수행하여 바람에 의해 야기되는 상호간섭효과를 고려하는 것이 가장 적합한 방법이라 할 수 있다.

• Wind and Structures
• /
• 제18권5호
• /
• pp.567-598
• /
• 2014

In this paper, wind induced aerodynamic loads on a standard tall building have been evaluated through large-eddy simulation (LES) technique. The flow parameters of an open terrain were recorded from the downstream of an empty boundary layer wind tunnel (BLWT) and used to prescribe the transient inlet boundary of the LES simulations. Three different numerically generated inflow boundary conditions have been investigated to assess their suitability for LES. A high frequency pressure integration (HFPI) approach has been employed to obtain the wind load. A total of 280 pressure monitoring points have been systematically distributed on the surfaces of the LES model building. Similar BLWT experiments were also done to validate the numerical results. In addition, the effects of adjacent buildings were studied. Among the three wind field generation methods (synthetic, Simirnov's, and Lund's recycling method), LES with perturbation from the synthetic random flow approach showed better agreement with the BLWT data. In general, LES predicted peak wind loads comparable with the BLWT data, with a maximum difference of 15% and an average difference of 5%, for an isolated building case and however higher estimation errors were observed for cases where adjacent buildings were placed in the vicinity of the study building.

• Wind and Structures
• /
• 제23권4호
• /
• pp.275-300
• /
• 2016

Synchronous multi-pressure measurements were carried out with relatively long time duration for a double-layer reticulated shell roof model in the atmospheric boundary layer wind tunnel. Since the long roof is open at two ends for the storage of coal piles, three different testing cases were considered as the empty roof without coal piles (Case A), half coal piles inside (Case B) and full coal piles inside (Case C). Based on the wind tunnel test results, non-Gaussian time-dependent statistics of net wind pressure on the shell roof were quantified in terms of skewness and kurtosis. It was found that the direct statistical estimation of high-order moments and peak factors is quite sensitive to the duration of wind pressure time-history data. The maximum value of COVs (Coefficients of variations) of high-order moments is up to 1.05 for several measured pressure processes. The Mixture distribution models are proposed for better modeling the distribution of a parent pressure process. With the aid of mixture parent distribution models, the existing translated-peak-process (TPP) method has been revised and improved in the estimation of non-Gaussian peak factors. Finally, non-Gaussian peak factors of wind pressure, particularly for those observed hardening pressure process, were calculated by employing various state-of-the-art methods and compared to the direct statistical analysis of the measured long-duration wind pressure data. The estimated non-Gaussian peak factors for a hardening pressure process at the leading edge of the roof were varying from 3.6229, 3.3693 to 3.3416 corresponding to three different cases of A, B and C.