• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권10호
• /
• pp.3333-3354
• /
• 2022

The 5G Core Network (5GC) is an essential part of the mobile communication network, but its security protection strategy based on the boundary construction is difficult to ensure the security inside the network. For example, the Network Function (NF) mutual authentication mechanism that relies on the transport layer security mechanism and OAuth2.0's Client Credentials cannot identify the hijacked NF. To address this problem, this paper proposes a trust model for 5GC based on NF interaction behavior to identify malicious NFs and improve the inherent security of 5GC. First, based on the interaction behavior and context awareness of NF, the trust between NFs is quantified through the frequency ratio of interaction behavior and the success rate of interaction behavior. Second, introduce trust transmit to make NF comprehensively refer to the trust evaluation results of other NFs. Last, classify the possible malicious behavior of NF and define the corresponding punishment mechanism. The experimental results show that the trust value of NFs converges to stable values, and the proposed trust model can effectively evaluate the trustworthiness of NFs and quickly and accurately identify different types of malicious NFs.

• Tribology and Lubricants
• /
• 제27권4호
• /
• pp.193-197
• /
• 2011

Friction behavior of nanoporous anodic aluminum oxide(AAO) film was investigated. A 60 ${\mu}m$ thick AAO film having nanopores of 45 nm diameter with 105 nm interpore-diatance was fabricated by mild anodization process. The AAO film was then saturated with paraffinic oil. Reciprocating ball-on-flat sliding friction tests using 1 mm diameter steel ball as the counterpart were carried out with normal load ranging from 0.1 N to 1 N in an ambient environment. The morphology of worn surfaces were analyzed using scanning electron microscopy. The friction coefficient significantly increased with the increase of load. The boundary lubrication layer of paraffinic oil contributed to the lower friction at relatively low load (0.1 N), but it is less effective at high load (1 N). Plastic deformed layer patches were formed on the worn surface of oil-enriched AAO at relatively low load (0.1 N) without evidence of tribochemical reaction. On the other hand, thick tribolayers were formed on the worn surface of both oil-enriched and as-prepared AAO at relatively high load (1 N) due to tribochemical reaction and material transfer.

• 한국응용곤충학회지
• /
• 제40권2호
• /
• pp.125-129
• /
• 2001

날개가 없는 몇몇 절지동물들은 공중이동을 하기 위한 수단으로써 이륙행동 보이는 종들이 있다. 본고는 포식성 이리응애류중에서 이륙행동을 보이는 종(Neoseiulus fallacis (Carman)) 과 이륙행동은 보이지 않으나, 공중이동률이 높은 종(Phytoseiulus persimilis Athias-Henriot),이륙행동이 없고 공중이동률이 중간치인 종(N. ca1ifornicus(McGregor))간에 공기역학적 측면에서 어떠한 메커니즘이 작용하는 지에 관한 연구이다. 위 종들의 도보이동 자세와 공주 이동 이륙행동 자세의 몸체의 수직적 위치, 몸체의 크기, 다리의 길이 등의 자료를 가지고 공기역학적 파라미터를 계산한 결과, P. persimilis는 도보이동 자세에서도 N. fallacis가 이륙행동을 보여야만 얻을 수 있는 양의 항력을 얻을 수 있음이 밝혀졌다. 이러한 관점에서 포식성 이리응애류의 이륙행동 진화에 대한 고찰하였다.

• 한국세라믹학회지
• /
• 제34권2호
• /
• pp.131-138
• /
• 1997

희석기체로써 Ar 및 H2를 사용하여 MTS(CH3SiCl3)를 원료물질로 한 탄화규소막을 흑연 기판 위에 화학증착시켰다. 본 연구는 증착온도 130$0^{\circ}C$, 총압력은 10 torr 및 MTS와 원료 운반기체의 총유량은 100 sccm으로 일정하게한 상태에서, 각 희석기체의 첨가에 따른 성장거동의 변화를 고찰하고자 하였다. 증착속도는 희석기체와 상관없이 첨가량이 200sccm일 때 최대값을 갖는 모양을 보였으나, Ar을 첨가할 때가 H2에 비해 더 빠른 증착속도를 나타냈다. 이러한 증착속도 특성은 전체 증착속도가 물질전달 율속단계에 있을 때, 각 희석기체의 첨가에 따라 변화되는 경막 두께(boundary layer thickness) 및 원료물질 농도의 상관관계에 기인한다고 여겨졌다. 우선배향성은 Ar의 경우 모든 첨가량의 범위에서 (220)면으로 우선배향되었으나, H2의 경우에는 200sccm이상에서 첨가량에 비례하여 (111)면으로 우선배향되는 경향을 보였다. 표면미세구조는 Ar을 첨가한 경우에 일정하게 facet구조를 유지하였으나, H2의 경우에는 facet에서 평탄한(smooth)구조로 변화되었다. 표면조도의 경우 첨가량이 늘어남에 따라 지속적으로 Ar에서는 증가하였지만, H2에서는 감소하였다.

• Structural Engineering and Mechanics
• /
• 제72권6호
• /
• pp.763-774
• /
• 2019

The main aim of this paper is enhancing design of traditional laminated composite plates subjected to static loads. In this regard, this paper suggests embedding a lightweight porous layer in the middle of laminated composite as the core layer of the resulted sandwich plate. The static responses of the suggested structures with uniform, symmetric and non-symmetric porosity distributions are compared to optimize their design. Using the first order shear deformation theories, the static governing equations of the suggested laminated composite plates with a porous layer (LCPPL) rested on two-parameter foundation are obtained. A finite element method is also utilized to solve the governing equations of LCPPLs. Effects of laminated composite and porosity characteristics as well as geometry dimension, edges' boundary conditions and foundation coefficients on the static deflection and stress distribution of the suggested composite plates have been investigated. The results reveal that the use of core between the layers of laminated composites leads to a sharp reduction in the static deflections of LCPPLs. Furthermore, in compare with perfect cores, the use of porous core between the layers of laminated composite plates can offer a considerable reduction in structural weight without a significant difference in their static responses.

• 마이크로전자및패키징학회지
• /
• 제7권4호
• /
• pp.31-35
• /
• 2000

반도체 칩과 리드프레임을 접착하고 있는 얇은 접착제층에 전단하중이 가해질 때 발생하는 응력상태를 조사하고 있다. 계면 응력상태를 해석하기 위해서 경계요소법이 사용되고 있다. 선형 탄성이론을 적용하여 해석하면, 강체와 접착제의 계면이 자유 경 계면과 만나는 부분에서 $\gamma^{\lambda=1}$(0<1<1) 형태의 응력 특이성이 존재한다. 이러한 특이성으로 인해, 모서리 균열이나 계면 박리가 발생할 수 있다.

• 한국세라믹학회지
• /
• 제43권7호
• /
• pp.415-420
• /
• 2006

The residual stresses in the interface region of the Thermal Barrier Coating (TBC)/Thermally Grown Oxide (TGO)/Bond Coat (BC) were calculated on the TBC-coated superalloy samples using a Finite Element Method (FEM). It was found that the stress distribution of the interface boundary was dependent upon mainly the geometrical shape or its aspect ratio and the thickness of TGO layer, which was formed by growth and swelling behavior of oxide layer. Maximum compressive residual stress in the TBC/TGO interface is higher than that of the TGO/bond coat interface, and the tensile stress had nothing to do with change of an aspect ratio. The compressive residual stresses in the TBC/TGO and TGO/bond coat interface region increased gradually with the TGO growth.

• 한국인쇄학회지
• /
• 제15권2호
• /
• pp.25-40
• /
• 1997

This research was carried out to investigated the effect of base paper and latex binder on printability and obtical properties of coated paper. Especially, it examined the effect of th pH of vase paper surface and functional groups of latices on the interactions between coating color components and on the structure of coated layer. It was found that the behavior of coating color containing amphoeric latex depends on the pH in the boundary region between coating color and base paper. Thus, the coating color formulated with amphoteric latex formed bulky coating layer by inducing stronger interaction between paper surface and coating components than the coating color with anionic latex. The coated paper with amphoteric latex showed better optical properties (i.e.gloss and optical) and printability (i.e. ink receptivity, wet ink receptivity, and ink set off) than the conventional anionic latex in the acidic and alkaline paper. However, dry pick strength of the coated paper was less decreased. This result indicated that amphoteric latex could also be applied practically to the alkaline paper.

• 대한전자공학회논문지
• /
• 제25권8호
• /
• pp.950-958
• /
• 1988

We have implemented a RTA system using W-halogen lamps and tried to recrystallize the phosphorus ion implanted amorphous silicon on insultor (SOI) taking advantages of seeding window. The purpose of this study is to investigate the possibility of a typical crystalline orientation occurred during the solidifying process of molten amorphous silicon layer. Experimental results show that several twin boundaries are found on the seeding window region after annealing for 15 sec at 1040\ulcorner. These twin boundaries represent that the recrystallization is partialy possible and when the annealing is done at 1150\ulcorner, (100) etch pits with <110> facets are found on the solidified amorphous silicon layer. Consequently, Hall mobility of recrystallized silicon film is measured and the thermal behavior of grain boundary is also observed by SEM.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.197-200
• /
• 2015

Understanding the slag flow behavior is important in an entrained coal gasifier for its influence of ash discharge and wall heat transfer rate. This study presents a new model to predict the transient behavior of the liquid and solid slag layers. Unlike the previous steady-state model, the solid slag layer was included in solving the governing equations in order to identify the temporal and spatial transformation between the solid-liquid slag, rather than treating the solid region as a boundary condition of the liquid layer. The performance of the new model was evaluated for changes in the slag deposition rate (${\pm}10%$) and gas temperature (${\pm}50K$) in a simple cylindrical gasifier. The results show that the characteristic times to reach a new steady-state ranged between 80 s to 180s for the changes in the two parameters. Because the characteristic times of the gasifier temperature and slag deposition rate by changes in the coal type and/or operating conditions would be almost instantaneous, the time-scale for the slag thickness at the bottom of the gasifier to stabilize was much larger.