• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.464-467
• /
• 1999

Usually, more reference signatures result in better performance in signature verification. However, registering .many signatures may be a tedious work for users, so algorithms that use less signatures for the registration without increasing error rate is needed. In this paper, we find the features such as pen-down duration, the number of locally minimum velocity points, and the number of locally maximum curvature points. Then we find the relationship between these features and the optimal decision boundary. We apply this relationship in deciding threshold for signature verification. Experimental results show that the method using three reference signatures has almost same error rate as algorithms with many references.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.11-16
• /
• 2007

Since public awareness on the importance of sea is increasing, a number of states have ratified the United Nations Convention on the Law of the Sea. However several problems on marine boundary making are raising due to the ambiguity of law and importance of sea area. The purpose of this study is to find a logical principal through overall consideration on decision of baseline points which is a criteria of maritime boundary delimitation. Accordingly, this paper considers the current status, problems and measures for marine boundary making and then presents an alternative on it.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.936-940
• /
• 1987

This paper describes the recognition boundary of Hangeul character to interpret variance factor in accordance with various combination. When the recognition algorithm based on comparing the MSE value with the one of the standard pattern in $16{\times}16$ images is performed, we come to a conclusion that we have towe must make a decision MSE value above 34 in order to achive theve recognition rate larger than 90%. Also we understand that varing component coordinates method based on statistical process of each character pattern is preferred.

• 한국공간구조학회논문집
• /
• 제3권3호
• /
• pp.67-74
• /
• 2003

The purpose of this study is to improve convergence speed of topology optimization procedure using the existing ESO method and to deal with topology decision of the truss structures according to a boundary condition, such as cantilever type. At the existing ESO topology optimization procedure for the truss structures, the adjustment of member sizes according to target stress has been executed by increasing or reducing a very small value from each member size. In this case, it takes too much iteration till convergence. Accordingly, it is practically hard to obtain optimum topology for a large scale structures. For that reason, it is necessary to improve convergence speed of ESO method more effectively. During the topology decision procedure, member sizes are adjusted by calculating approximate solution for member sizes corresponding to the target stress at every step, the new member sizes are adjusted by such method are applied in FEA procedure of next step.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.397-401
• /
• 2006

In this paper, we proposed a high precision location estimation algorithm using an enhanced decision scheme for RTLS and analyzed its performance in point of an average estimation error distance at 2D coordinates searching area, $300m\times300m$ and LOS propagation environments. Also the performance was compared with that of conventional TDOA algorithm according to the number of available reader and received sub-blink. From the results, we confirmed that the proposed location estimation algorithm using an enhanced decision scheme was able to improve an estimation accuracy even in boundary region of searching area. Moreover, effectively reduced an error distance in entire searching area so that increased the stability of location estimation in RTLS. Therefore, we verified that the proposed algorithm provided a more higher estimation accuracy and stability than conventional TDOA.

• 대한전자공학회논문지
• /
• 제12권1호
• /
• pp.1-6
• /
• 1975

잡음을 포함한 저화질의용화상의 배경과 목적대상정을 분할하는 환경영역은 중요한 정보로 의학상 진단에 큰 의의를 갖고 있다. 이 논문의 목적은 화상의 농도변화를 정총화하여 통계적수법에 의해 환경영역을 결정하는 threshold를 구하는 방법을 제시하고 이를 비 scintigram에 적용하여 실험을 행했다. 전화상을 64개의 소영역으로 나누고 경계영역이 존재하는 부분온 선택하며 이 부분에 maximum likelihood법을 적용하여 threshold를 결정한뒤 내삽법에 의해 전화소에 대한 threshold를 구하고 수곽을 포함한 2식화면을 구했다. 이의 결과는 인간의 인식과 거의 같은 결과로 동적해석방법의 유효성이 증명되었다. The boundary has been one of the most important information in radiographic images and the degrees of difficulty involved varies greatly with the quality of the picture. These Buantifications are the means to diagnoses. The purpose of this paper is to quantify intensity variation and the threshold decision which is based on statistical principles and is developed to detect limits in liver scintigrams the entire picture is devide4 into 64 small regions. The kurtosis and variances for each smal region are used as indications to select the histograms the thresholds are computed according to the method o(maximum likelihood which minimizes the probability o( misclassification. Therefore Ive have demonstrated the applicability of the boundary detection and proved good agreement with human recognition, and we can use it for the diagnosis data of liver disease.

• 한국인터넷방송통신학회논문지
• /
• 제15권6호
• /
• pp.311-319
• /
• 2015

본 논문에서는 산업공장 내의 생산 효율을 높이기 위하여 제조공정 자원을 예측하고 위험 관리를 효율적으로 이행하는 자원예측 및 위험관리를 위한 의사결정 시스템을 제안하였다. 각 공정에서 발생되는 다양한 정보들을 효율적으로 관리하는 세부 공정별 시나리오 생성이 어렵고, 동일한 공정 내에서도 다양한 제품의 생산하기 위해 제조 설비의 조건 변경이 빈번하다. 제품의 생산 주기 또한 일정하지 않아 연속되지 않은 데이터가 발생하여 소량의 데이터로 변동을 확인해야 하는 문제점이 있다. 이러한 문제점을 해결하기 위해서는 제조공정의 데이터 일원화, 공정 자원 예측, 위험 예측, 공정 현황 모니터링을 통하여 문제 발생시 즉각 조치가 가능하여야 한다. 본 논문에서는 설계도면 변경 범위, 자원 예측, 공정 완료 예정일을 회귀알고리즘을 이용하여 수식을 도출하였으며, 분류 트리 기법, 경계값 분석을 통하여 3단계로 의사결정 시스템을 제안하였다.

• 디지털콘텐츠학회 논문지
• /
• 제16권5호
• /
• pp.671-680
• /
• 2015

Joint Bayesian 방법론[1]은 2012년 발표된 이후 최근까지 최고 성능을 보이는 거의 모든 얼굴인식 알고리즘에서 이진 분류를 위해 사용되고 있지만, 지금까지 이를 개선한 알고리즘은 2D-JB[2] 외에 거의 발표되지 않았다. 우리는 본 논문에서 주어진 얼굴 영상과 이를 좌우 반전시킨 미러 영상을 함께 고려함으로써 Joint Bayesian 방법론의 성능을 향상시킬 수 있는 방법론을 제안한다. 일반적인 패턴인식에서 결정함수 값이 결정경계 또는 임계치에 가까운 경우 오류가 발생할 확률이 높다. 제안한 방법론은 미러 영상의 특징을 이용하여 결정함수 값을 결정경계로부터 멀어지게 함으로써 오류를 줄이는 방법이다. 우리는 LFW DB를 이용한 실험을 통해 제안한 JB 개선 방법론이 기존 JB 방법론보다 1%이상 높은 인식률을 보임을 입증하였다. LFW DB를 이용한 기존 연구들에서 성능을 1% 높이기 위해 많은 학습데이터가 필요했음을 감안할 때, 제안한 방법론은 큰 의미가 있다고 볼 수 있다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.764-767
• /
• 2006

It can be important framework data to monitor the change of land-use pattern of river boundary in design and management of river. This study analyzed the change of land-use pattern of Gab- and Yudeung River using time-series aerial images. To do this, we carried out radiation and geometric correction of image, and estimated land-use changes in inland and floodplain. As the analysis of inland, the ratio of residential, commercial, industrial, educational and public area, that is urbanized element, increases, but that of agricultural area shows a decline on the basis of 1990. Also, Minimum Distance Method, which is a kind of supervised classification method, is applied to extract water-body and sand bar layer in floodplain. As the analysis of land-use, the ratio of level-upped riverside land and water-body increases, but that of sand bar decreases. These time-series land use information can be important decision making data to evaluate the urbanization of river boundary, and especially it gives us goodness in river development project such as the composition of ecological habitat.

• 한국CDE학회논문집
• /
• 제14권3호
• /
• pp.197-206
• /
• 2009

In a finite element analysis of the metal forming processes having large plastic deformation, largely distorted elements are unstable and hence they influence upon the result toward negative way so that adaptive remeshing is required to avoid a failure in the numerical computation. Therefore automatic mesh generation and regeneration is very important to avoid a numerical failure in a finite element analysis. In case of generating quadrilateral mesh, the automation is more difficult than that of triangular mesh because of its geometric complexity. However its demand is very high due to the precision of analysis. Thus, in this study, an automatic quadrilateral mesh generation and regeneration method using grid-based approach is developed. The developed method contains decision of grid size to generate initial mesh inside a two dimensional domain, classification of boundary angles and inner boundary nodes to improve element qualities in case of concave domains, and boundary projection to construct the final mesh.