• Structural Monitoring and Maintenance
• /
• 제7권1호
• /
• pp.27-42
• /
• 2020

Dynamic stability of graded nonlocal nano-dimension plates on elastic substrate due to in-plane periodic loads has been researched via a novel 3- unknown plate theory based on exact position of neutral surface. Proposed theory confirms the shear deformation effects and contains lower field components in comparison to first order and refined 4- unknown plate theories. A modified power-law function has been utilized in order to express the porosity-dependent material coefficients. The equations of nanoplate have been represented in the context of Mathieu-Hill equations and Chebyshev-Ritz-Bolotin's approach has been performed to derive the stability boundaries. Detailed impacts of static/dynamic loading parameters, nonlocal constant, foundation parameters, material index and porosities on instability boundaries of graded nanoscale plates are researched.

• The Journal of the Acoustical Society of Korea
• /
• 제22권3E호
• /
• pp.133-140
• /
• 2003

A time series simulation is presented by a ray approach for the simulating the received waveform of a broadband acoustical signals interacting with the ocean boundaries. The environment is assumed to be horizontally stratified, and the seafloor is described in terms of homogeneous fluid half-space. The ray approach includes the effects of reflection from the air-water, water-sediment interface and phase shifts due to boundaries interaction. To generate time series, we assume that the acoustic energy propagates from source to receiver along eigenrays and represent the action of the bottom on the incident wave by a linear filter and characterized in the frequency domain by the transfer function. As example application, the time series for an explosive source in a shallow water environment is calculated and analyzed in terms of acoustical process. good agreement with measured time series is demonstrated.

• 한국분말재료학회지
• /
• 제9권3호
• /
• pp.148-152
• /
• 2002

The microstructures and indentation fracture of pressureless-sintered $DyNbO_4$ crystalline were investigated as a basic study for the application of weak phase of fibrous monolithic composites. They were comprised with many lamella twins as well as micro-cracks at the grain boundaries. The hardness at room temperature was remarkably low value(575 Hv) due to the low relative density and existence of microcracks at grain boundaries. The main fracture mode was a typical intergranular fracture, and showed remarkable micro-cracking effect. The heavy plastic deformation was observed around the site of indentation. In addition, the $DyNbO_4$ was expected to apply as a weak phase in the fibrous monolithic composites because of the low hardness and easily plastic deformation that could be led the preferable pulled-out and microcracking toughening under the failure.

• 시스템엔지니어링학술지
• /
• 제11권1호
• /
• pp.73-79
• /
• 2015

This paper describes boundary analysis for modeling Aircraft Carrier Sortie Generation System(CVSGS). An aircraft carrier, as a super system, is a warship going into battle by operating a number of aircraft on deck and it should be lay down a definition about aviation operations interacting between aircraft carrier and carrier air wing in small deck area. For this reason this paper models common aviation support system for generating sortie basic unit of carrier aviation operations unlike to general warship and defines boundaries between this system and aircraft carrier and carrier air wing. This paper analysis activities of aircraft carrier and embarked carrier air wing in carrier aviation operations, and analysis and defines boundaries Aircraft Carrier Sortie Generation System(CVSGS) to perform core functions in interacting between aircraft carrier and embarked carrier air wing.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.103-106
• /
• 2004

Extrapolation off the boundaries of scattered data is an intrinsic feature of interpolation. However, extrapolation causes serious problems in stereo-vision and mapping, which has not been investigated carefully. In this paper, we present novel schemes to eliminate the extrapolation effects for the generation of a digital elevation model (DEM). As a first step, we devise point distribution criteria, namely COG (Center of Gravity) and ECI (Empty Center Index), and apply rigorous and robust elimination based on the criteria. Compared with other methods, the proposed schemes are computationally fast and applicable to a wide range of interpolation techniques.

• 제어로봇시스템학회논문지
• /
• 제14권7호
• /
• pp.679-688
• /
• 2008

This paper presents an algorithm capable of detecting leading vehicles using a forward-looking camera. In fact, the accurate measurements of the contact locations of vehicles with road surface are prerequisites for the intelligent vehicle technologies based on a monocular vision. Relying on multistage processing of relevant edge features to the hypothesis generation of a vehicle, the proposed algorithm creates candidate positions being the left and right boundaries of vehicles, and searches for pairs to be vehicle boundaries from the potential positions by evaluating horizontal symmetry. The proposed algorithm is proven to be successful by experiments performed on images acquired by a moving vehicle.

• 대한전자공학회논문지
• /
• 제25권8호
• /
• pp.950-958
• /
• 1988

We have implemented a RTA system using W-halogen lamps and tried to recrystallize the phosphorus ion implanted amorphous silicon on insultor (SOI) taking advantages of seeding window. The purpose of this study is to investigate the possibility of a typical crystalline orientation occurred during the solidifying process of molten amorphous silicon layer. Experimental results show that several twin boundaries are found on the seeding window region after annealing for 15 sec at 1040\ulcorner. These twin boundaries represent that the recrystallization is partialy possible and when the annealing is done at 1150\ulcorner, (100) etch pits with <110> facets are found on the solidified amorphous silicon layer. Consequently, Hall mobility of recrystallized silicon film is measured and the thermal behavior of grain boundary is also observed by SEM.

• 전자공학회논문지A
• /
• 제32A권10호
• /
• pp.19-24
• /
• 1995

The majority of problems to which FDTD is being applied involve open structure which require the appropriate scheme to terminate the computational domain. In particular, for the propagation problem of the outgoing waves, a certain type of boundary condition needs to be applied on outer boundaries of the computational domain to generate no reflected waves. In this paper, a new simple technique is presented, which allows the reduced computation time and excellent absorbing characteristics for normal and oblique incident waves on outer boundaries. To illustrate the validity of this method, a numerical calculation for monopole antenna is carried out and the results are compared to measured data. The time-domain properties for circular patch antennas are investicated.

• 한국CDE학회논문집
• /
• 제4권3호
• /
• pp.269-283
• /
• 1999

Surface/surface intersection is a common and important problem in geometric modeling and CAD/CAM. Several methods have been used to approach this problem. All possible intersection curves can be obtained by using the subdivision algorithm, while it requires a great deal of memory and is somewhat inefficient. The tracing algorithm is much faster than the subdivision algorithm, and can find points on the intersection curve sequentially. But, the tracing algorithm has some problems in the intersection curves on surface boundaries. In this paper, an Improved tracing algorithm that includes some ideas such as a new trace-terminating condition for the intersection curves on surface boundaries, detecting closed intersections and extension for composite surfaces is suggested. This algorithm consists of three step: generating state points for curve tracing, tracing intersection curves and sorting pieces of the intersection curves. The results of this algorithm and comparisons to the 'DESIGNBASE' and 'ACIS' system are presented.

• Steel and Composite Structures
• /
• 제2권4호
• /
• pp.237-246
• /
• 2002

In this paper, the solution of a semi-infinite plane with one circular hole is presented. This solution is induced by repeatedly superposing the solution of an infinite plane with one circular hole and that of a semi-infinite plane without holes to cancel out the stresses arising on both boundaries. This procedure is carried out until the stresses arising on both boundaries converge. This method does not require complicated calculation procedures as does the method using stress functions defined in a bipolar coordinate system. Some numerical results are shown by graphical representations.